39958fe854
* Create README.md * Add files via upload * Create keymap.c * Update README.md * Update keyboards/lostdotfish/rp2040_orbweaver/README.md Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/lostdotfish/rp2040_orbweaver/keyboard.json Co-authored-by: Drashna Jaelre <drashna@live.com> * Rename README.md to readme.md * Update readme.md * Update keyboards/lostdotfish/rp2040_orbweaver/keyboard.json Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/lostdotfish/rp2040_orbweaver/mcuconf.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboard.json * Update keyboards/lostdotfish/rp2040_orbweaver/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboard.json * Update mcuconf.h * Update rp2040_orbweaver.c * Delete keyboards/lostdotfish/rp2040_orbweaver/halconf.h * Update config.h * Update readme.md * Update readme.md * Update readme.md * Update keyboards/lostdotfish/rp2040_orbweaver/keyboard.json --------- Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: jack <jack@pngu.org>
51 lines
2.5 KiB
Markdown
51 lines
2.5 KiB
Markdown
# rp2040_orbweaver
|
|
QMK firmware for RP2040 based MCU replacement PCB for the Razer Orbweaver gaming keypad
|
|
|
|
|
|
|
|
|
|
This firmware is for the Razer Orbweaver Chroma keypad with a custom, plug and play, RP2040 MCU PCB. For installation instructions and board availability see [geekhack](https://geekhack.org/index.php?topic=124092.0).
|
|
|
|
The firmware controls a 6x5 key matrix (4x5 keypad + 6 additional keys on the thumb pad and up to 4 additional keys added by user). It also controls a IS31FL3731 RGB Matrix controller (on the Chroma model) via I2C interface. This requires a single I2C Driver with 20 common anode RGB LEDs.
|
|
|
|
Key 20 (bottom right) is used to switch layers.
|
|
|
|
The default key map provides 3 preset layers.
|
|
|
|
(layer 0) is a generic layer based on the original Razer defaults.
|
|
(layer 1) replaces modifier keys with letter keys.
|
|
(layer 2) replaces the 2 top rows with RGB control keys.
|
|
|
|
The three LEDs on the thumb pad indicate the active layer.
|
|
|
|
Blue = layer 0
|
|
Green = layer 1
|
|
Yellow = layer 3
|
|
|
|
All LEDs will be off when any other (user added) layout is activated
|
|
|
|
A set of RGB animations are included in confg.h. These are controlled by activating the Yellow layer and using keys 01 - 11 (11 toggles the lighting on and off - see /keymaps/default/keymap.c for more information)
|
|
|
|
Many thanks to a_marmot. Without his original handwired project, this board would not have been possible. His original work can be found here. [geekhack](https://geekhack.org/index.php?topic=119396.0).
|
|
|
|
* Keyboard Maintainer: [Lostdotfish](https://github.com/Lostdotfish)
|
|
* Hardware Supported: RP2040 + IS31FL3731
|
|
* Hardware Availability: [https://geekhack.org/index.php?topic=124092.0](https://geekhack.org/index.php?topic=124092.0)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make lostdotfish/rp2040_orbweaver:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make lostdotfish/rp2040_orbweaver:default:flash
|
|
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 2 ways:
|
|
|
|
* Press and hold the upper left hand key on the main keyboard while you plug in the USB.
|
|
* Press and release the boot button on the top of the RP2040_Orbweaver v2.0 inside the modded unit.
|