5650894c20
* Add Model-B keyboard * PR changes for Model-B * Update to OLED on Model-B * added license to pass lint check * update virtual eeprom for Model-B * eeconfig_read_kb() update on Model-B * cleanup changes for Model B * implementing Model B suggestions
32 lines
1.7 KiB
Markdown
32 lines
1.7 KiB
Markdown
# Model-B
|
|
|
|
A 75% keyboard based on the RP2040.
|
|
|
|
* Keyboard Maintainer: [Brian Hill](https://github.com/TrojanPinata)
|
|
* Hardware Supported: [GitHub](https://github.com/TrojanPinata/Model-B)
|
|
|
|
## Revisions
|
|
|
|
At the current moment there is only one variant of the Model-B, the rev-0 (aka the prototype board). Any others are clones and may not have the exact firmware requirements.
|
|
|
|
## Building and Flashing
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make trojan_pinata/model-b/rev0:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make trojan_pinata/model-b/rev0:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
|
|
* **Physical reset button**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, replacing the Esc key.
|
|
|
|
After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
|