Merge branch 'master' into sculpt2
This commit is contained in:
milestogo
commit
feb858c5a9
172 changed files with 6626 additions and 2266 deletions
3
keyboards/handwired/magicforce68/Makefile
Normal file
3
keyboards/handwired/magicforce68/Makefile
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
20
keyboards/handwired/magicforce68/README.md
Normal file
20
keyboards/handwired/magicforce68/README.md
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
Magicforce 68 Handwired
|
||||
=======================
|
||||
|
||||
This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino *Pro* Micro.
|
||||
|
||||
## Wiring Layout
|
||||
|
||||
|
||||
|
||||
## Pinout
|
||||
|
||||
The following pins are used:
|
||||
- Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6
|
||||
- Rows 1-5: F0, F1, F4, F5, F6
|
||||
|
||||
## Compiling and loading the firmware
|
||||
|
||||
To build the firmware, run `make`.
|
||||
|
||||
To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button.
|
||||
162
keyboards/handwired/magicforce68/config.h
Normal file
162
keyboards/handwired/magicforce68/config.h
Normal file
|
|
@ -0,0 +1,162 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Hexwire
|
||||
#define PRODUCT Magicforce 68
|
||||
#define DESCRIPTION Handwired Magicforce 68
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
67
keyboards/handwired/magicforce68/keymaps/default/keymap.c
Normal file
67
keyboards/handwired/magicforce68/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
#include "magicforce68.h"
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _FN1 1
|
||||
#define _FN2 2
|
||||
#define KC_ KC_TRNS
|
||||
#define KC_X0 LT(_FN2, KC_GRV)
|
||||
#define KC_X1 MO(_FN1)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QWERTY] = KEYMAP(
|
||||
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
|
||||
ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP,
|
||||
/*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN,
|
||||
/*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */
|
||||
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER ,
|
||||
/*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */
|
||||
LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP ,
|
||||
/*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */
|
||||
LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT
|
||||
/*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */
|
||||
),
|
||||
|
||||
[_FN1] = KEYMAP(
|
||||
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
|
||||
GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME,
|
||||
/*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */
|
||||
, , , UP , , , , , , , , , , , VOLD,END,
|
||||
/*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */
|
||||
, ,LEFT,DOWN,RGHT, , , , , , , , ,
|
||||
/*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */
|
||||
, , , , , , ,MUTE, , , , , MUTE,
|
||||
/*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
|
||||
, , , , , , , MPRV,MPLY,MNXT
|
||||
/*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */
|
||||
),
|
||||
|
||||
[_FN2] = KEYMAP(
|
||||
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
|
||||
GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME,
|
||||
/*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */
|
||||
, , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END,
|
||||
/*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */
|
||||
, ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , ,
|
||||
/*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */
|
||||
, , , , , , 0 , 1 , 2 , 3 , , , MUTE,
|
||||
/*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
|
||||
, , , , , , , MPRV,MPLY,MNXT
|
||||
/*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */
|
||||
)
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
8
keyboards/handwired/magicforce68/magicforce68.c
Normal file
8
keyboards/handwired/magicforce68/magicforce68.c
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
#include "magicforce68.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
20
keyboards/handwired/magicforce68/magicforce68.h
Normal file
20
keyboards/handwired/magicforce68/magicforce68.h
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
#ifndef MAGICFORCE68_H
|
||||
#define MAGICFORCE68_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2E, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3E, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \
|
||||
) { \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
|
||||
}
|
||||
|
||||
#endif
|
||||
83
keyboards/handwired/magicforce68/rules.mk
Normal file
83
keyboards/handwired/magicforce68/rules.mk
Normal file
|
|
@ -0,0 +1,83 @@
|
|||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
avrdude: build
|
||||
ls /dev/tty* > /tmp/1; \
|
||||
echo "Reset your Pro Micro now"; \
|
||||
while [[ -z $$USB ]]; do \
|
||||
sleep 1; \
|
||||
ls /dev/tty* > /tmp/2; \
|
||||
USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
|
||||
done; \
|
||||
avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
|
||||
|
||||
.PHONY: avrdude
|
||||
BIN
keyboards/handwired/magicforce68/wiring-layout.png
Normal file
BIN
keyboards/handwired/magicforce68/wiring-layout.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 72 KiB |
|
|
@ -43,38 +43,107 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
// #define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
// #define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
// #define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
// #define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
|
|
@ -83,6 +152,110 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#define PS2_INIT_DELAY 2000
|
||||
#define BATTERY_PIN 9
|
||||
#define BATTERY_POLL 30000
|
||||
#define MAX_VOLTAGE 4.2
|
||||
#define MIN_VOLTAGE 3.2
|
||||
|
||||
#define KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
|
||||
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \
|
||||
) \
|
||||
{ \
|
||||
{k11, k12, k13, k14, k15, k16}, \
|
||||
{k21, k22, k23, k24, k25, k26}, \
|
||||
{k31, k32, k33, k34, k35, k36}, \
|
||||
{k41, k42, k43, k44, k45, k46}, \
|
||||
{k17, k18, k19, k1a, k1b, k1c}, \
|
||||
{k27, k28, k29, k2a, k2b, k2c}, \
|
||||
{k37, k38, k39, k3a, k3b, k3c}, \
|
||||
{k47, k48, k49, k4a, k4b, k4c} \
|
||||
}
|
||||
|
||||
#ifndef __ASSEMBLER__ // assembler doesn't like enum in .h file
|
||||
enum led_sequence {
|
||||
LED_IND_BLUETOOTH,
|
||||
LED_IND_USB,
|
||||
LED_IND_BATTERY,
|
||||
|
||||
LED_IND_FUN,
|
||||
LED_IND_NUM,
|
||||
LED_IND_EMOJI,
|
||||
|
||||
LED_BKSP,
|
||||
LED_ENT,
|
||||
LED_RSFT,
|
||||
LED_RCTL,
|
||||
|
||||
LED_RGUI,
|
||||
LED_SLSH,
|
||||
LED_SCLN,
|
||||
LED_P,
|
||||
|
||||
LED_O,
|
||||
LED_L,
|
||||
LED_DOT,
|
||||
LED_RALT,
|
||||
|
||||
LED_EMOJI,
|
||||
LED_COMM,
|
||||
LED_K,
|
||||
LED_I,
|
||||
|
||||
LED_U,
|
||||
LED_J,
|
||||
LED_M,
|
||||
LED_FUN,
|
||||
|
||||
LED_RSPC,
|
||||
LED_N,
|
||||
LED_HH,
|
||||
LED_Y,
|
||||
|
||||
LED_TRACKPOINT3,
|
||||
LED_TRACKPOINT2,
|
||||
LED_TRACKPOINT1,
|
||||
|
||||
LED_LSPC,
|
||||
LED_B,
|
||||
LED_G,
|
||||
LED_T,
|
||||
|
||||
LED_R,
|
||||
LED_F,
|
||||
LED_V,
|
||||
LED_NUM,
|
||||
|
||||
LED_PUNC,
|
||||
LED_C,
|
||||
LED_D,
|
||||
LED_E,
|
||||
|
||||
LED_W,
|
||||
LED_S,
|
||||
LED_X,
|
||||
LED_LALT,
|
||||
|
||||
LED_LGUI,
|
||||
LED_Z,
|
||||
LED_A,
|
||||
LED_Q,
|
||||
|
||||
LED_TAB,
|
||||
LED_ESC,
|
||||
LED_LSFT,
|
||||
LED_LCTL,
|
||||
|
||||
LED_TOTAL
|
||||
};
|
||||
|
||||
#define RGB_DI_PIN B5
|
||||
#define RGBSPS_NUM LED_TOTAL
|
||||
#endif
|
||||
|
||||
/* PS/2 mouse */
|
||||
#ifdef PS2_USE_BUSYWAIT
|
||||
# define PS2_CLOCK_PORT PORTD
|
||||
|
|
|
|||
44
keyboards/handwired/promethium/keymaps/priyadi/README.md
Normal file
44
keyboards/handwired/promethium/keymaps/priyadi/README.md
Normal file
|
|
@ -0,0 +1,44 @@
|
|||
Priyadi Keymap for Planck-like Keyboards
|
||||
========================================
|
||||
|
||||
Main layer modifications from default Planck layout:
|
||||
|
||||
* Enter moved to quotes position
|
||||
* Quotes moved to semicolon position.
|
||||
* QWERTZ style colon & semicolon. shift-. = : shift-, = ; This is done in hardware, no layout switching needed in software.
|
||||
* < & > occupied precious real estate, and so they are moved down to punctuation layer.
|
||||
* Right-shift on Enter position.
|
||||
* Removed arrow keys, they are on another layer now.
|
||||
* Put Ctrl-Alt-Super and Super-AltGr-Ctrl in left & right corners.
|
||||
* Lower & Raise is now called Num and Fun.
|
||||
* OS & Left keys become another thumb modifier: Empty & Greek (Empty because I used this for another use and my muscle memory is not adapted to it yet)
|
||||
|
||||
On Promethium, Trackpoint is enabled on PD2 and PD3. We impersonate a Thinkpad keyboard to be able to use Thinkpad driver on Windows (still needs verification).
|
||||
|
||||
AltGr & Compose dual use key. Tap for Compose (mapped to Scroll Lock in hardware) and press for AltGr.
|
||||
|
||||
Supported layouts: QWERTY, DVORAK, Colemak, Workman, Norman. Switchable from SYS layer. In DVORAK, semicolon is replaced by /? key.
|
||||
|
||||
Num activates NUM layer: hexkeypad on the right side and most punctuation on the left side. Hexkeypad is optimized for C-style hex, IPv6, HTML RGB triplets, etc.
|
||||
|
||||
Fun activates FUN layer: arrow cluster on right home row, F-numbers on left side.
|
||||
|
||||
Pressing Num+Fun activates PUNC layer: same punctuations as NUM layer on the left side, parens on the right side.
|
||||
|
||||
Greek activates either GREEKU or GREEKL layer, depending whether shift is pressed or not. Shift state changes are also taken into account when the layer is active.
|
||||
|
||||
Greek+Empty activates EMOJI layer. The whole keyboard now outputs emojis!
|
||||
|
||||
Pressing both spacebars (spacekeys, actually) activates GUI layer. QWERTYUIOP switches to a virtual desktop. J & L switches virtual desktop to the left or right. S & F behaves like Alt-Tab and Alt-Shift-Tab. This works by sending Alt press when entering the layer, and Alt release when other than S or F keys are pressed.
|
||||
|
||||
Pressing both Ctrls activates SYS layer for configuring the keyboard.
|
||||
|
||||
On Promethium, USB or Bluetooth output is detected on startup. If USB is connected, then USB is used initially. SYS-U and SYS-B switch output to USB or Bluetooth at runtime. Current active output is indicated with LEDs.
|
||||
|
||||
SYS-W, SYS-L, SYS-M switch Unicode input method. SYS-Q, SYS-D, SYS-C, SYS-K, SYS-N switch to QWERTY, DVORAK, Colemak, Workman and Norman, respectively.
|
||||
|
||||
On Planck, SYS-A (mnemonic: audio) toggles faux clicky: use buzzer to emit clicks on key presses and releases.
|
||||
|
||||
On Promethium there are 6 indicator LEDs, and under switch LEDs on each switches, including Trackpoint buttons. Totaling 57 LEDs. Output is limited to 0xF for each LEDs to conserve power. SYS-G (mnemonic: glow) toggles various backlighting modes.
|
||||
|
||||
On Promethium, there's a LED to indicate battery level. Hue indicates level: green is full, red is empty.
|
||||
|
|
@ -3,6 +3,8 @@
|
|||
|
||||
#include "../../config.h"
|
||||
|
||||
#define PRIYADI_PROMETHIUM
|
||||
|
||||
/* bootmagic salt key */
|
||||
#define BOOTMAGIC_KEY_SALT KC_ESC
|
||||
|
||||
|
|
@ -11,7 +13,16 @@
|
|||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#define RGB_DI_PIN B5
|
||||
#define RGBSPS_NUM 57
|
||||
#define RGBSPS_ENABLE
|
||||
|
||||
#define UNICODE_TYPE_DELAY 0
|
||||
|
||||
#define LAYOUT_DVORAK
|
||||
#define LAYOUT_COLEMAK
|
||||
#define LAYOUT_NORMAN
|
||||
#define LAYOUT_WORKMAN
|
||||
|
||||
#define DOUBLESPACE_LAYER_ENABLE
|
||||
// #define TOLELOT_ENABLE
|
||||
|
||||
#endif
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
|
|
@ -1,6 +1,42 @@
|
|||
#include "promethium.h"
|
||||
#include "analog.h"
|
||||
#include "timer.h"
|
||||
#include "matrix.h"
|
||||
|
||||
// cubic fit {3.3, 0}, {3.5, 2.9}, {3.6, 5}, {3.7, 8.6}, {3.8, 36}, {3.9, 62}, {4.0, 73}, {4.05, 83}, {4.1, 89}, {4.15, 94}, {4.2, 100}
|
||||
|
||||
uint8_t battery_level(void) {
|
||||
float voltage = analogRead(BATTERY_PIN) * 2 * 3.3 / 1024;
|
||||
if (voltage < MIN_VOLTAGE) return 0;
|
||||
if (voltage > MAX_VOLTAGE) return 255;
|
||||
return (voltage - MIN_VOLTAGE) / (MAX_VOLTAGE - MIN_VOLTAGE) * 255;
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void battery_poll(uint8_t level) {
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
static uint16_t counter = BATTERY_POLL;
|
||||
counter++;
|
||||
|
||||
if (counter > BATTERY_POLL) {
|
||||
counter = 0;
|
||||
battery_poll(battery_level());
|
||||
}
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1,101 +1,10 @@
|
|||
#ifndef PROMETHIUM_H
|
||||
#define PROMETHIUM_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "stdint.h"
|
||||
|
||||
#define PS2_INIT_DELAY 2000
|
||||
|
||||
#define KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
|
||||
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \
|
||||
) \
|
||||
{ \
|
||||
{k11, k12, k13, k14, k15, k16}, \
|
||||
{k21, k22, k23, k24, k25, k26}, \
|
||||
{k31, k32, k33, k34, k35, k36}, \
|
||||
{k41, k42, k43, k44, k45, k46}, \
|
||||
{k17, k18, k19, k1a, k1b, k1c}, \
|
||||
{k27, k28, k29, k2a, k2b, k2c}, \
|
||||
{k37, k38, k39, k3a, k3b, k3c}, \
|
||||
{k47, k48, k49, k4a, k4b, k4c} \
|
||||
}
|
||||
|
||||
enum led_sequence {
|
||||
LED_IND_BLUETOOTH,
|
||||
LED_IND_USB,
|
||||
LED_IND_BATTERY,
|
||||
|
||||
LED_IND_FUNC,
|
||||
LED_IND_NUM,
|
||||
LED_IND_EMOJI,
|
||||
|
||||
LED_BKSP,
|
||||
LED_ENT,
|
||||
LED_RSFT,
|
||||
LED_RCTL,
|
||||
|
||||
LED_RGUI,
|
||||
LED_SLSH,
|
||||
LED_SCLN,
|
||||
LED_P,
|
||||
|
||||
LED_O,
|
||||
LED_L,
|
||||
LED_DOT,
|
||||
LED_RALT,
|
||||
|
||||
LED_EMOJI,
|
||||
LED_COMM,
|
||||
LED_K,
|
||||
LED_I,
|
||||
|
||||
LED_U,
|
||||
LED_J,
|
||||
LED_M,
|
||||
LED_FUNC,
|
||||
|
||||
LED_RSPC,
|
||||
LED_N,
|
||||
LED_HH,
|
||||
LED_Y,
|
||||
|
||||
LED_TRACKPOINT3,
|
||||
LED_TRACKPOINT2,
|
||||
LED_TRACKPOINT1,
|
||||
|
||||
LED_LSPC,
|
||||
LED_B,
|
||||
LED_G,
|
||||
LED_T,
|
||||
|
||||
LED_R,
|
||||
LED_F,
|
||||
LED_V,
|
||||
LED_NUM,
|
||||
|
||||
LED_PUNC,
|
||||
LED_C,
|
||||
LED_D,
|
||||
LED_E,
|
||||
|
||||
LED_W,
|
||||
LED_S,
|
||||
LED_X,
|
||||
LED_LALT,
|
||||
|
||||
LED_LGUI,
|
||||
LED_Z,
|
||||
LED_A,
|
||||
LED_Q,
|
||||
|
||||
LED_TAB,
|
||||
LED_ESC,
|
||||
LED_LSFT,
|
||||
LED_LCTL,
|
||||
};
|
||||
void battery_poll(uint8_t level);
|
||||
void led_set_kb(uint8_t usb_led);
|
||||
void led_set_user(uint8_t usb_led);
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -21,4 +21,53 @@ void rgbsps_turnoff(void) {
|
|||
|
||||
void rgbsps_send(void) {
|
||||
ws2812_setleds(led, RGBSPS_NUM);
|
||||
}
|
||||
}
|
||||
|
||||
void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val) {
|
||||
uint8_t r = 0, g = 0, b = 0, base, color;
|
||||
|
||||
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
|
||||
r = val;
|
||||
g = val;
|
||||
b = val;
|
||||
} else {
|
||||
base = ((255 - sat) * val) >> 8;
|
||||
color = (val - base) * (hue % 60) / 60;
|
||||
|
||||
switch (hue / 60) {
|
||||
case 0:
|
||||
r = val;
|
||||
g = base + color;
|
||||
b = base;
|
||||
break;
|
||||
case 1:
|
||||
r = val - color;
|
||||
g = val;
|
||||
b = base;
|
||||
break;
|
||||
case 2:
|
||||
r = base;
|
||||
g = val;
|
||||
b = base + color;
|
||||
break;
|
||||
case 3:
|
||||
r = base;
|
||||
g = val - color;
|
||||
b = val;
|
||||
break;
|
||||
case 4:
|
||||
r = base + color;
|
||||
g = base;
|
||||
b = val;
|
||||
break;
|
||||
case 5:
|
||||
r = val;
|
||||
g = base;
|
||||
b = val - color;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
rgbsps_set(index, r, g, b);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgbsps_turnoff(void);
|
||||
void rgbsps_send(void);
|
||||
void rgbsps_send(void);
|
||||
void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val);
|
||||
|
|
@ -72,4 +72,5 @@ API_SYSEX_ENABLE ?= no
|
|||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
SRC += $(QUANTUM_DIR)/light_ws2812.c
|
||||
SRC += rgbsps.c
|
||||
SRC += rgbsps.c
|
||||
SRC += $(QUANTUM_DIR)/analog.c
|
||||
Loading…
Add table
Add a link
Reference in a new issue