drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

Normalise mouse keycodes (#23975)

Browse source
This commit is contained in:
Ryan 2024-07-03 18:35:54 +10:00 • committed by GitHub
parent bc0c69570b
commit f8596b40a4
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
19 changed files with 426 additions and 209 deletions
Download patch file Download diff file Expand all files Collapse all files

8
docs/features/encoders.md
View file

@ -84,10 +84,10 @@ Your `keymap.c` will then need an encoder mapping defined (for four layers and t
```c
#if defined(ENCODER_MAP_ENABLE)
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
[0] = { ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
[1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI), ENCODER_CCW_CW(RGB_SAD, RGB_SAI) },
[2] = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI), ENCODER_CCW_CW(RGB_SPD, RGB_SPI) },
[3] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD), ENCODER_CCW_CW(KC_RIGHT, KC_LEFT) },
[0] = { ENCODER_CCW_CW(MS_WHLU, MS_WHLD), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
[1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI), ENCODER_CCW_CW(RGB_SAD, RGB_SAI) },
[2] = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI), ENCODER_CCW_CW(RGB_SPD, RGB_SPI) },
[3] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD), ENCODER_CCW_CW(KC_RIGHT, KC_LEFT) },
};
#endif
```

82
docs/features/mouse_keys.md
View file

@ -18,27 +18,27 @@ MOUSEKEY_ENABLE = yes
In your keymap you can use the following keycodes to map key presses to mouse actions:
|Key |Aliases |Description |
|----------------|---------|-----------------|
|`KC_MS_UP` |`KC_MS_U`|Move cursor up |
|`KC_MS_DOWN` |`KC_MS_D`|Move cursor down |
|`KC_MS_LEFT` |`KC_MS_L`|Move cursor left |
|`KC_MS_RIGHT` |`KC_MS_R`|Move cursor right|
|`KC_MS_BTN1` |`KC_BTN1`|Press button 1 |
|`KC_MS_BTN2` |`KC_BTN2`|Press button 2 |
|`KC_MS_BTN3` |`KC_BTN3`|Press button 3 |
|`KC_MS_BTN4` |`KC_BTN4`|Press button 4 |
|`KC_MS_BTN5` |`KC_BTN5`|Press button 5 |
|`KC_MS_BTN6` |`KC_BTN6`|Press button 6 |
|`KC_MS_BTN7` |`KC_BTN7`|Press button 7 |
|`KC_MS_BTN8` |`KC_BTN8`|Press button 8 |
|`KC_MS_WH_UP` |`KC_WH_U`|Move wheel up |
|`KC_MS_WH_DOWN` |`KC_WH_D`|Move wheel down |
|`KC_MS_WH_LEFT` |`KC_WH_L`|Move wheel left |
|`KC_MS_WH_RIGHT`|`KC_WH_R`|Move wheel right |
|`KC_MS_ACCEL0` |`KC_ACL0`|Set speed to 0 |
|`KC_MS_ACCEL1` |`KC_ACL1`|Set speed to 1 |
|`KC_MS_ACCEL2` |`KC_ACL2`|Set speed to 2 |
|Key |Aliases |Description |
|-------------------------|---------|---------------------------|
|`QK_MOUSE_CURSOR_UP` |`MS_UP` |Mouse cursor up |
|`QK_MOUSE_CURSOR_DOWN` |`MS_DOWN`|Mouse cursor down |
|`QK_MOUSE_CURSOR_LEFT` |`MS_LEFT`|Mouse cursor left |
|`QK_MOUSE_CURSOR_RIGHT` |`MS_RGHT`|Mouse cursor right |
|`QK_MOUSE_BUTTON_1` |`MS_BTN1`|Mouse button 1 |
|`QK_MOUSE_BUTTON_2` |`MS_BTN2`|Mouse button 2 |
|`QK_MOUSE_BUTTON_3` |`MS_BTN3`|Mouse button 3 |
|`QK_MOUSE_BUTTON_4` |`MS_BTN4`|Mouse button 4 |
|`QK_MOUSE_BUTTON_5` |`MS_BTN5`|Mouse button 5 |
|`QK_MOUSE_BUTTON_6` |`MS_BTN6`|Mouse button 6 |
|`QK_MOUSE_BUTTON_7` |`MS_BTN7`|Mouse button 7 |
|`QK_MOUSE_BUTTON_8` |`MS_BTN8`|Mouse button 8 |
|`QK_MOUSE_WHEEL_UP` |`MS_WHLU`|Mouse wheel up |
|`QK_MOUSE_WHEEL_DOWN` |`MS_WHLD`|Mouse wheel down |
|`QK_MOUSE_WHEEL_LEFT` |`MS_WHLL`|Mouse wheel left |
|`QK_MOUSE_WHEEL_RIGHT` |`MS_WHLR`|Mouse wheel right |
|`QK_MOUSE_ACCELERATION_0`|`MS_ACL0`|Set mouse acceleration to 0|
|`QK_MOUSE_ACCELERATION_1`|`MS_ACL1`|Set mouse acceleration to 1|
|`QK_MOUSE_ACCELERATION_2`|`MS_ACL2`|Set mouse acceleration to 2|
## Configuring mouse keys
@ -106,17 +106,17 @@ Tips:
### Constant mode
In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `KC_ACL0`, `KC_ACL1` and `KC_ACL2` change the cursor and scroll speed to their respective setting.
In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `MS_ACL0`, `MS_ACL1` and `MS_ACL2` change the cursor and scroll speed to their respective setting.
You can choose whether speed selection is momentary or tap-to-select:
* **Momentary:** The chosen speed is only active while you hold the respective key. When the key is raised, mouse keys returns to the unmodified speed.
* **Tap-to-select:** The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of `KC_ACL1`. There is no unmodified speed.
* **Tap-to-select:** The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of `MS_ACL1`. There is no unmodified speed.
The default speeds from slowest to fastest are as follows:
* **Momentary:** `KC_ACL0` < `KC_ACL1` < *unmodified* < `KC_ACL2`
* **Tap-to-select:** `KC_ACL0` < `KC_ACL1` < `KC_ACL2`
* **Momentary:** `MS_ACL0` < `MS_ACL1` < *unmodified* < `MS_ACL2`
* **Tap-to-select:** `MS_ACL0` < `MS_ACL1` < `MS_ACL2`
To use constant speed mode, you must at least define `MK_3_SPEED` in your keymap’s `config.h` file:
@ -138,32 +138,32 @@ Use the following settings if you want to adjust cursor movement or scrolling:
|`MK_MOMENTARY_ACCEL` |*Not defined*|Enable momentary speed selection |
|`MK_C_OFFSET_UNMOD` |16 |Cursor offset per movement (unmodified) |
|`MK_C_INTERVAL_UNMOD`|16 |Time between cursor movements (unmodified) |
|`MK_C_OFFSET_0` |1 |Cursor offset per movement (`KC_ACL0`) |
|`MK_C_INTERVAL_0` |32 |Time between cursor movements (`KC_ACL0`) |
|`MK_C_OFFSET_1` |4 |Cursor offset per movement (`KC_ACL1`) |
|`MK_C_INTERVAL_1` |16 |Time between cursor movements (`KC_ACL1`) |
|`MK_C_OFFSET_2` |32 |Cursor offset per movement (`KC_ACL2`) |
|`MK_C_INTERVAL_2` |16 |Time between cursor movements (`KC_ACL2`) |
|`MK_C_OFFSET_0` |1 |Cursor offset per movement (`MS_ACL0`) |
|`MK_C_INTERVAL_0` |32 |Time between cursor movements (`MS_ACL0`) |
|`MK_C_OFFSET_1` |4 |Cursor offset per movement (`MS_ACL1`) |
|`MK_C_INTERVAL_1` |16 |Time between cursor movements (`MS_ACL1`) |
|`MK_C_OFFSET_2` |32 |Cursor offset per movement (`MS_ACL2`) |
|`MK_C_INTERVAL_2` |16 |Time between cursor movements (`MS_ACL2`) |
|`MK_W_OFFSET_UNMOD` |1 |Scroll steps per scroll action (unmodified)|
|`MK_W_INTERVAL_UNMOD`|40 |Time between scroll steps (unmodified) |
|`MK_W_OFFSET_0` |1 |Scroll steps per scroll action (`KC_ACL0`) |
|`MK_W_INTERVAL_0` |360 |Time between scroll steps (`KC_ACL0`) |
|`MK_W_OFFSET_1` |1 |Scroll steps per scroll action (`KC_ACL1`) |
|`MK_W_INTERVAL_1` |120 |Time between scroll steps (`KC_ACL1`) |
|`MK_W_OFFSET_2` |1 |Scroll steps per scroll action (`KC_ACL2`) |
|`MK_W_INTERVAL_2` |20 |Time between scroll steps (`KC_ACL2`) |
|`MK_W_OFFSET_0` |1 |Scroll steps per scroll action (`MS_ACL0`) |
|`MK_W_INTERVAL_0` |360 |Time between scroll steps (`MS_ACL0`) |
|`MK_W_OFFSET_1` |1 |Scroll steps per scroll action (`MS_ACL1`) |
|`MK_W_INTERVAL_1` |120 |Time between scroll steps (`MS_ACL1`) |
|`MK_W_OFFSET_2` |1 |Scroll steps per scroll action (`MS_ACL2`) |
|`MK_W_INTERVAL_2` |20 |Time between scroll steps (`MS_ACL2`) |
### Combined mode
This mode functions like **Accelerated** mode, however, you can hold `KC_ACL0`, `KC_ACL1` and `KC_ACL2`
This mode functions like **Accelerated** mode, however, you can hold `MS_ACL0`, `MS_ACL1` and `MS_ACL2`
to momentarily (while held) set the cursor and scroll speeds to constant speeds. When no acceleration
keys are held, this mode is identical to **Accelerated** mode, and can be modified using all of the
relevant settings.
* **KC_ACL0:** This acceleration sets your cursor to the slowest possible speed. This is useful for very
* **MS_ACL0:** This acceleration sets your cursor to the slowest possible speed. This is useful for very
small and detailed movements of the cursor.
* **KC_ACL1:** This acceleration sets your cursor to half the maximum (user defined) speed.
* **KC_ACL2:** This acceleration sets your cursor to the maximum (computer defined) speed. This is
* **MS_ACL1:** This acceleration sets your cursor to half the maximum (user defined) speed.
* **MS_ACL2:** This acceleration sets your cursor to the maximum (computer defined) speed. This is
useful for moving the cursor large distances without much accuracy.
To use combined speed mode, you must at least define `MK_COMBINED` in your keymap’s `config.h` file:

8
docs/features/repeat_key.md
View file

@ -60,10 +60,10 @@ with mods, like Ctrl + Left &harr; Ctrl + Right Arrow.
|`KC_UP` &harr; `KC_DOWN` | Up &harr; Down Arrow |
|`KC_HOME` &harr; `KC_END` | Home &harr; End |
|`KC_PGUP` &harr; `KC_PGDN` | Page Up &harr; Page Down |
|`KC_MS_L` &harr; `KC_MS_R` | Mouse Cursor Left &harr; Right |
|`KC_MS_U` &harr; `KC_MS_D` | Mouse Cursor Up &harr; Down |
|`KC_WH_L` &harr; `KC_WH_R` | Mouse Wheel Left &harr; Right |
|`KC_WH_U` &harr; `KC_WH_D` | Mouse Wheel Up &harr; Down |
|`MS_LEFT` &harr; `MS_RGHT` | Mouse Cursor Left &harr; Right |
|`MS_UP` &harr; `MS_DOWN` | Mouse Cursor Up &harr; Down |
|`MS_WHLL` &harr; `MS_WHLR` | Mouse Wheel Left &harr; Right |
|`MS_WHLU` &harr; `MS_WHLD` | Mouse Wheel Up &harr; Down |
**Misc**