drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

Browse source
This commit is contained in:
Stephan Bösebeck 2016-01-25 10:52:29 +01:00
commit da7f259a1f
13 changed files with 1064 additions and 19 deletions
Download patch file Download diff file Expand all files Collapse all files

5
keyboard/planck/Makefile
View file

@ -27,7 +27,7 @@
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@ -143,11 +143,13 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# AUDIO_ENABLE = YES # Audio output on port C6
# UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
# RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with MIDI at the same time.
ifdef BACKLIGHT_ENABLE
SRC += backlight.c
endif
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
@ -157,4 +159,3 @@ VPATH += $(TOP_DIR)
VPATH += $(TMK_DIR)
include $(TOP_DIR)/quantum/quantum.mk

9
keyboard/planck/config.h
View file

@ -58,6 +58,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* ws2812 RGB LED */
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
#define ws2812_pin PD1
#define RGBLED_NUM 28 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/*
* Feature disable options
* These options are also useful to firmware size reduction.

BIN
keyboard/planck/keymaps/yang/WS2812-wiring.jpg Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 284 KiB

146
keyboard/planck/keymaps/yang/keymap.c Normal file
View file

@ -0,0 +1,146 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include "planck.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QW 0
#define _CM 1
#define _DV 2
#define _LW 3
#define _RS 4
#define _RGB 5
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QW] = { /* Qwerty */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_CM] = { /* Colemak */
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_DV] = { /* Dvorak */
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
{KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_RS] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_LW] = { /* LOWER */
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_RGB] = { /* RGBLIGHT */
{KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL},
{KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS},
{KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
}
};
enum function_id {
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_KEY(_RGB, KC_SPC),
[1] = ACTION_FUNCTION(RGBLED_TOGGLE),
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE),
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
}
}

BIN
keyboard/planck/keymaps/yang/planck-with-rgb-underglow.jpg Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 335 KiB

7
keyboard/planck/planck.c
View file

@ -15,6 +15,11 @@ void * matrix_init_kb(void) {
backlight_init_ports();
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
// Turn status LED on
DDRE |= (1<<6);
PORTE |= (1<<6);
@ -28,4 +33,4 @@ void * matrix_scan_kb(void) {
if (matrix_scan_user) {
(*matrix_scan_user)();
}
};
};

9
keyboard/planck/planck.h
View file

@ -6,6 +6,9 @@
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#ifdef RGBLIGHT_ENABLE
#include "rgblight.h"
#endif
#include <stddef.h>
#ifdef MIDI_ENABLE
#include <keymap_midi.h>
@ -22,7 +25,7 @@
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
{ k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
}
}
#define PLANCK_GRID( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
@ -35,9 +38,9 @@
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
}
}
void * matrix_init_user(void);
void * matrix_scan_user(void);
#endif
#endif