KC60 refactor (#10834)

keyboards/kc60/config.h

@@ -20,12 +20,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0x530A
-#define PRODUCT_ID      0x6FFC
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    NPKC
-#define PRODUCT         KC60
-#define DESCRIPTION     QMK Firmware: KC60
+#define VENDOR_ID    0x530A
+#define PRODUCT_ID   0x6FFC
+#define DEVICE_VER   0x0001
+#define MANUFACTURER NPKC
+#define PRODUCT      KC60
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -45,39 +44,39 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL*/
+/* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B6
-#define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
+#define BACKLIGHT_BREATHING
 
-#ifdef RGBLIGHT_ENABLE
-#    define RGB_DI_PIN F5
-#    define RGBLED_NUM 16  // Number of LEDs. Change this to match your use case.
+#define RGB_DI_PIN F5
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 16
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-#    define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 /*== all animations enable ==*/
 #    define RGBLIGHT_ANIMATIONS
 /*== or choose animations ==*/
-// #    define RGBLIGHT_EFFECT_BREATHING
-// #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #    define RGBLIGHT_EFFECT_SNAKE
-// #    define RGBLIGHT_EFFECT_KNIGHT
-// #    define RGBLIGHT_EFFECT_CHRISTMAS
-// #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #    define RGBLIGHT_EFFECT_RGB_TEST
-// #    define RGBLIGHT_EFFECT_ALTERNATING
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
 /*== customize breathing effect ==*/
 /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
 #    define RGBLIGHT_BREATHE_TABLE_SIZE 256  // 256(default) or 128 or 64
 /*==== use exp() and sin() ====*/
-// #    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-// #    define RGBLIGHT_EFFECT_BREATHE_MAX 255      // 0 to 255
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX 255      // 0 to 255
 #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
@@ -91,9 +90,52 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0