1
0
Fork 0

Additional changes for Layer State typedef compatibility (#5906)

* Additional changes for Layer State typedef compatibility

* Replace biton32 with get_highest_layer in docs

* Change additional layer structure code

* Fix uGFX reference issue

* Remove dynamic_keymap check

* Where did all these extra spaces come from

Co-Authored-By: fauxpark <fauxpark@gmail.com>
This commit is contained in:
Drashna Jael're 2019-08-21 17:07:49 -07:00 committed by GitHub
parent d534c72a54
commit b62e160a89
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
9 changed files with 25 additions and 21 deletions

View file

@ -297,8 +297,8 @@ This runs code every time that the layers get changed. This can be useful for l
This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
```c
uint32_t layer_state_set_user(uint32_t state) {
switch (biton32(state)) {
layer_state_t layer_state_set_user(layer_state_t state) {
switch (get_highest_layer(state)) {
case _RAISE:
rgblight_setrgb (0x00, 0x00, 0xFF);
break;
@ -320,8 +320,8 @@ uint32_t layer_state_set_user(uint32_t state) {
```
### `layer_state_set_*` Function Documentation
* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
* Keymap: `uint32_t layer_state_set_user(uint32_t state)`
* Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
* Keymap: `layer_state_t layer_state_set_user(layer_state_t state)`
The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
@ -377,8 +377,8 @@ void keyboard_post_init_user(void) {
The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above.
```c
uint32_t layer_state_set_user(uint32_t state) {
switch (biton32(state)) {
layer_state_t layer_state_set_user(layer_state_t state) {
switch (get_highest_layer(state)) {
case _RAISE:
if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
break;

View file

@ -31,7 +31,7 @@ This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keym
void oled_task_user(void) {
// Host Keyboard Layer Status
oled_write_P(PSTR("Layer: "), false);
switch (biton32(layer_state)) {
switch (get_highest_layer(layer_state)) {
case _QWERTY:
oled_write_P(PSTR("Default\n"), false);
break;

View file

@ -115,11 +115,11 @@ For instance, let's look at the `layer_state_set_user()` function. You can enab
In your `<name.c>` file, you'd want to add this:
```c
__attribute__ ((weak))
uint32_t layer_state_set_keymap (uint32_t state) {
layer_state_t layer_state_set_keymap (layer_state_t state) {
return state;
}
uint32_t layer_state_set_user (uint32_t state) {
layer_state_t layer_state_set_user (layer_state_t state) {
state = update_tri_layer_state(state, 2, 3, 5);
return layer_state_set_keymap (state);
}

View file

@ -50,7 +50,7 @@ The caveat to this method is that you cannot access the `z` layer without having
#### Example
```c
uint32_t layer_state_set_user(uint32_t state) {
layer_state_t layer_state_set_user(layer_state_t state) {
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
```
@ -58,7 +58,7 @@ uint32_t layer_state_set_user(uint32_t state) {
Alternatively, you don't have to immediately "return" the value. This is useful if you want to add multiple tri layers, or if you want to add additional effects.
```c
uint32_t layer_state_set_user(uint32_t state) {
layer_state_t layer_state_set_user(layer_state_t state) {
state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
state = update_tri_layer_state(state, _RAISE, _SYMB, _SPECIAL);
return state;