Manta60 refactor (#11378)

keyboards/manta60/config.h

@@ -20,12 +20,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x991D
-#define DEVICE_VER 0x0001
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x991D
+#define DEVICE_VER   0x0001
 #define MANUFACTURER kamonanban
-#define PRODUCT manta60
-#define DESCRIPTION A split keyboard with 27 ortholinear keys and 5-7 thumb/little finger keys
+#define PRODUCT      manta60
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -45,7 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL*/
+/* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
 /*
@@ -54,50 +53,45 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1
 
-#define RGBLIGHT_SPLIT
 #define RGB_DI_PIN D3
-
-#ifdef RGBLIGHT_ENABLE
-  #define RGBLED_NUM 68    // Number of LEDs
-  #define RGBLED_SPLIT { 34, 34 }
-#endif
-
 #ifdef RGB_DI_PIN
-  #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#    define RGBLED_NUM 68
+#    define RGBLIGHT_SPLIT
+#    define RGBLED_SPLIT { 34, 34 }
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    ifndef IOS_DEVICE_ENABLE
+#        define RGBLIGHT_VAL_STEP 16
+#        define RGBLIGHT_LIMIT_VAL 128 /* The maximum brightness level */
+#    else
+#        define RGBLIGHT_VAL_STEP 4
+#        define RGBLIGHT_LIMIT_VAL 32 /* The maximum brightness level */
+#    endif
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-#ifndef IOS_DEVICE_ENABLE
- /* The maximum brightness level */
-  #define RGBLIGHT_LIMIT_VAL 128
-  #define RGBLIGHT_VAL_STEP 16
-#else
-  #define RGBLIGHT_LIMIT_VAL 32
-  #define RGBLIGHT_VAL_STEP 4
-#endif
-
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-
 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-  #define USB_MAX_POWER_CONSUMPTION 400
+#    define USB_MAX_POWER_CONSUMPTION 400
 #else
-  #define USB_MAX_POWER_CONSUMPTION 100
+#    define USB_MAX_POWER_CONSUMPTION 100
 #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
@@ -111,6 +105,32 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -126,5 +146,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0