Add support for Meira
This commit is contained in:
Cole Markham
Jack Humbert
parent
c51dfef958
commit
a9a46adba0
23 changed files with 2186 additions and 0 deletions
287
keyboards/meira/TWIlib.c
Executable file
287
keyboards/meira/TWIlib.c
Executable file
|
|
@ -0,0 +1,287 @@
|
|||
/*
|
||||
* TWIlib.c
|
||||
*
|
||||
* Created: 6/01/2014 10:41:33 PM
|
||||
* Author: Chris Herring
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "TWIlib.h"
|
||||
#include "util/delay.h"
|
||||
#include "print.h"
|
||||
|
||||
void TWIInit()
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWIInfo.repStart = 0;
|
||||
// Set pre-scalers (no pre-scaling)
|
||||
TWSR = 0;
|
||||
// Set bit rate
|
||||
TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
|
||||
// Enable TWI and interrupt
|
||||
TWCR = (1 << TWIE) | (1 << TWEN);
|
||||
}
|
||||
|
||||
uint8_t isTWIReady()
|
||||
{
|
||||
if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
|
||||
{
|
||||
|
||||
// xprintf("i2c ready\n");
|
||||
return 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
if(TWIInfo.mode == Initializing){
|
||||
switch(TWIInfo.errorCode){
|
||||
case TWI_SUCCESS:
|
||||
break;
|
||||
case TWI_NO_RELEVANT_INFO:
|
||||
|
||||
break;
|
||||
case TWI_LOST_ARBIT:
|
||||
case TWI_MT_DATA_NACK:
|
||||
// Some kind of I2C error, reset and re-init
|
||||
xprintf("I2C init error: %d\n", TWIInfo.errorCode);
|
||||
TWCR = (1 << TWINT)|(1 << TWSTO);
|
||||
TWIInit();
|
||||
break;
|
||||
default:
|
||||
xprintf("Other i2c init error: %d\n", TWIInfo.errorCode);
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking)
|
||||
{
|
||||
// Wait until ready
|
||||
while (!isTWIReady()) {_delay_us(1);}
|
||||
// Reset the I2C stuff
|
||||
TWCR = (1 << TWINT)|(1 << TWSTO);
|
||||
TWIInit();
|
||||
// Set repeated start mode
|
||||
TWIInfo.repStart = repStart;
|
||||
// Copy transmit info to global variables
|
||||
TWITransmitBuffer = (uint8_t *)TXdata;
|
||||
TXBuffLen = dataLen;
|
||||
TXBuffIndex = 0;
|
||||
|
||||
// If a repeated start has been sent, then devices are already listening for an address
|
||||
// and another start does not need to be sent.
|
||||
if (TWIInfo.mode == RepeatedStartSent)
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
else // Otherwise, just send the normal start signal to begin transmission.
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWISendStart();
|
||||
}
|
||||
if(blocking){
|
||||
// Wait until ready
|
||||
while (!isTWIReady()){_delay_us(1);}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
|
||||
// {
|
||||
// if (dataLen <= TXMAXBUFLEN)
|
||||
// {
|
||||
// // Wait until ready
|
||||
// while (!isTWIReady()) {_delay_us(1);}
|
||||
// // Set repeated start mode
|
||||
// TWIInfo.repStart = repStart;
|
||||
// // Copy data into the transmit buffer
|
||||
// uint8_t *data = (uint8_t *)TXdata;
|
||||
// for (int i = 0; i < dataLen; i++)
|
||||
// {
|
||||
// TWITransmitBuffer[i] = data[i];
|
||||
// }
|
||||
// // Copy transmit info to global variables
|
||||
// TXBuffLen = dataLen;
|
||||
// TXBuffIndex = 0;
|
||||
|
||||
// // If a repeated start has been sent, then devices are already listening for an address
|
||||
// // and another start does not need to be sent.
|
||||
// if (TWIInfo.mode == RepeatedStartSent)
|
||||
// {
|
||||
// TWIInfo.mode = Initializing;
|
||||
// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
// TWISendTransmit(); // Send the data
|
||||
// }
|
||||
// else // Otherwise, just send the normal start signal to begin transmission.
|
||||
// {
|
||||
// TWIInfo.mode = Initializing;
|
||||
// TWISendStart();
|
||||
// }
|
||||
|
||||
// }
|
||||
// else
|
||||
// {
|
||||
// return 1; // return an error if data length is longer than buffer
|
||||
// }
|
||||
// return 0;
|
||||
// }
|
||||
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
|
||||
{
|
||||
// Check if number of bytes to read can fit in the RXbuffer
|
||||
if (bytesToRead < RXMAXBUFLEN)
|
||||
{
|
||||
// Reset buffer index and set RXBuffLen to the number of bytes to read
|
||||
RXBuffIndex = 0;
|
||||
RXBuffLen = bytesToRead;
|
||||
// Create the one value array for the address to be transmitted
|
||||
uint8_t TXdata[1];
|
||||
// Shift the address and AND a 1 into the read write bit (set to write mode)
|
||||
TXdata[0] = (TWIaddr << 1) | 0x01;
|
||||
// Use the TWITransmitData function to initialize the transfer and address the slave
|
||||
TWITransmitData(TXdata, 1, repStart, 0);
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
ISR (TWI_vect)
|
||||
{
|
||||
switch (TWI_STATUS)
|
||||
{
|
||||
// ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- //
|
||||
case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
|
||||
// Set mode to Master Transmitter
|
||||
TWIInfo.mode = MasterTransmitter;
|
||||
case TWI_START_SENT: // Start condition has been transmitted
|
||||
case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
|
||||
if (TXBuffIndex < TXBuffLen) // If there is more data to send
|
||||
{
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
// This transmission is complete however do not release bus yet
|
||||
else if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MASTER RECEIVER ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
|
||||
// Switch to Master Receiver mode
|
||||
TWIInfo.mode = MasterReceiver;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// This transmission is complete however do not release bus yet
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MT and MR common ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
|
||||
case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
|
||||
case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
|
||||
case TWI_LOST_ARBIT: // Arbitration has been lost
|
||||
// Return error and send stop and set mode to ready
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
case TWI_REP_START_SENT: // Repeated start has been transmitted
|
||||
// Set the mode but DO NOT clear TWINT as the next data is not yet ready
|
||||
TWIInfo.mode = RepeatedStartSent;
|
||||
break;
|
||||
|
||||
// ----\/ ---- SLAVE RECEIVER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- SLAVE TRANSMITTER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- MISCELLANEOUS STATES ----\/ ---- //
|
||||
case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
|
||||
// Rather, it is there to be manually set between operations
|
||||
break;
|
||||
case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
|
||||
TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
|
||||
TWIInfo.mode = Ready;
|
||||
TWISendStop();
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue