Normalize line endings
This commit is contained in:
Fred Sundvik
parent
de58ec9738
commit
a5b1af4999
39 changed files with 6322 additions and 6322 deletions
|
|
@ -1,156 +1,156 @@
|
|||
;---------------------------------------------------------------------------;
|
||||
; Software implemented UART module ;
|
||||
; (C)ChaN, 2005 (http://elm-chan.org/) ;
|
||||
;---------------------------------------------------------------------------;
|
||||
; Bit rate settings:
|
||||
;
|
||||
; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz
|
||||
; 2.4kbps 138 - - - - - - - -
|
||||
; 4.8kbps 68 138 - - - - - - -
|
||||
; 9.6kbps 33 68 138 208 - - - - -
|
||||
; 19.2kbps - 33 68 102 138 173 208 - -
|
||||
; 38.4kbps - - 33 50 68 85 102 138 172
|
||||
; 57.6kbps - - 21 33 44 56 68 91 114
|
||||
; 115.2kbps - - - - 21 27 33 44 56
|
||||
|
||||
.nolist
|
||||
#include <avr/io.h>
|
||||
.list
|
||||
|
||||
#define BPS 102 /* Bit delay. (see above table) */
|
||||
#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
|
||||
|
||||
#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */
|
||||
#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */
|
||||
#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */
|
||||
#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */
|
||||
|
||||
|
||||
|
||||
#ifdef SPM_PAGESIZE
|
||||
.macro _LPMI reg
|
||||
lpm \reg, Z+
|
||||
.endm
|
||||
.macro _MOVW dh,dl, sh,sl
|
||||
movw \dl, \sl
|
||||
.endm
|
||||
#else
|
||||
.macro _LPMI reg
|
||||
lpm
|
||||
mov \reg, r0
|
||||
adiw ZL, 1
|
||||
.endm
|
||||
.macro _MOVW dh,dl, sh,sl
|
||||
mov \dl, \sl
|
||||
mov \dh, \sh
|
||||
.endm
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
;---------------------------------------------------------------------------;
|
||||
; Transmit a byte in serial format of N81
|
||||
;
|
||||
;Prototype: void xmit (uint8_t data);
|
||||
;Size: 16 words
|
||||
|
||||
.global xmit
|
||||
.func xmit
|
||||
xmit:
|
||||
#if BIDIR
|
||||
ldi r23, BPS-1 ;Pre-idle time for bidirectional data line
|
||||
5: dec r23 ;
|
||||
brne 5b ;/
|
||||
#endif
|
||||
in r0, _SFR_IO_ADDR(SREG) ;Save flags
|
||||
|
||||
com r24 ;C = start bit
|
||||
ldi r25, 10 ;Bit counter
|
||||
cli ;Start critical section
|
||||
|
||||
1: ldi r23, BPS-1 ;----- Bit transferring loop
|
||||
2: dec r23 ;Wait for a bit time
|
||||
brne 2b ;/
|
||||
brcs 3f ;MISO = bit to be sent
|
||||
OUT_1 ;
|
||||
3: brcc 4f ;
|
||||
OUT_0 ;/
|
||||
4: lsr r24 ;Get next bit into C
|
||||
dec r25 ;All bits sent?
|
||||
brne 1b ; no, coutinue
|
||||
|
||||
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
|
||||
ret
|
||||
.endfunc
|
||||
|
||||
|
||||
|
||||
;---------------------------------------------------------------------------;
|
||||
; Receive a byte
|
||||
;
|
||||
;Prototype: uint8_t rcvr (void);
|
||||
;Size: 19 words
|
||||
|
||||
.global rcvr
|
||||
.func rcvr
|
||||
rcvr:
|
||||
in r0, _SFR_IO_ADDR(SREG) ;Save flags
|
||||
|
||||
ldi r24, 0x80 ;Receiving shift reg
|
||||
cli ;Start critical section
|
||||
|
||||
1: SKIP_IN_1 ;Wait for idle
|
||||
rjmp 1b
|
||||
2: SKIP_IN_0 ;Wait for start bit
|
||||
rjmp 2b
|
||||
ldi r25, BPS/2 ;Wait for half bit time
|
||||
3: dec r25
|
||||
brne 3b
|
||||
|
||||
4: ldi r25, BPS ;----- Bit receiving loop
|
||||
5: dec r25 ;Wait for a bit time
|
||||
brne 5b ;/
|
||||
lsr r24 ;Next bit
|
||||
SKIP_IN_0 ;Get a data bit into r24.7
|
||||
ori r24, 0x80
|
||||
brcc 4b ;All bits received? no, continue
|
||||
|
||||
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
|
||||
ret
|
||||
.endfunc
|
||||
|
||||
|
||||
; Not wait for start bit. This should be called after detecting start bit.
|
||||
.global recv
|
||||
.func recv
|
||||
recv:
|
||||
in r0, _SFR_IO_ADDR(SREG) ;Save flags
|
||||
|
||||
ldi r24, 0x80 ;Receiving shift reg
|
||||
cli ;Start critical section
|
||||
|
||||
;1: SKIP_IN_1 ;Wait for idle
|
||||
; rjmp 1b
|
||||
;2: SKIP_IN_0 ;Wait for start bit
|
||||
; rjmp 2b
|
||||
ldi r25, BPS/2 ;Wait for half bit time
|
||||
3: dec r25
|
||||
brne 3b
|
||||
|
||||
4: ldi r25, BPS ;----- Bit receiving loop
|
||||
5: dec r25 ;Wait for a bit time
|
||||
brne 5b ;/
|
||||
lsr r24 ;Next bit
|
||||
SKIP_IN_0 ;Get a data bit into r24.7
|
||||
ori r24, 0x80
|
||||
brcc 4b ;All bits received? no, continue
|
||||
|
||||
ldi r25, BPS/2 ;Wait for half bit time
|
||||
6: dec r25
|
||||
brne 6b
|
||||
7: SKIP_IN_1 ;Wait for stop bit
|
||||
rjmp 7b
|
||||
|
||||
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
|
||||
ret
|
||||
.endfunc
|
||||
;---------------------------------------------------------------------------;
|
||||
; Software implemented UART module ;
|
||||
; (C)ChaN, 2005 (http://elm-chan.org/) ;
|
||||
;---------------------------------------------------------------------------;
|
||||
; Bit rate settings:
|
||||
;
|
||||
; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz
|
||||
; 2.4kbps 138 - - - - - - - -
|
||||
; 4.8kbps 68 138 - - - - - - -
|
||||
; 9.6kbps 33 68 138 208 - - - - -
|
||||
; 19.2kbps - 33 68 102 138 173 208 - -
|
||||
; 38.4kbps - - 33 50 68 85 102 138 172
|
||||
; 57.6kbps - - 21 33 44 56 68 91 114
|
||||
; 115.2kbps - - - - 21 27 33 44 56
|
||||
|
||||
.nolist
|
||||
#include <avr/io.h>
|
||||
.list
|
||||
|
||||
#define BPS 102 /* Bit delay. (see above table) */
|
||||
#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
|
||||
|
||||
#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */
|
||||
#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */
|
||||
#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */
|
||||
#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */
|
||||
|
||||
|
||||
|
||||
#ifdef SPM_PAGESIZE
|
||||
.macro _LPMI reg
|
||||
lpm \reg, Z+
|
||||
.endm
|
||||
.macro _MOVW dh,dl, sh,sl
|
||||
movw \dl, \sl
|
||||
.endm
|
||||
#else
|
||||
.macro _LPMI reg
|
||||
lpm
|
||||
mov \reg, r0
|
||||
adiw ZL, 1
|
||||
.endm
|
||||
.macro _MOVW dh,dl, sh,sl
|
||||
mov \dl, \sl
|
||||
mov \dh, \sh
|
||||
.endm
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
;---------------------------------------------------------------------------;
|
||||
; Transmit a byte in serial format of N81
|
||||
;
|
||||
;Prototype: void xmit (uint8_t data);
|
||||
;Size: 16 words
|
||||
|
||||
.global xmit
|
||||
.func xmit
|
||||
xmit:
|
||||
#if BIDIR
|
||||
ldi r23, BPS-1 ;Pre-idle time for bidirectional data line
|
||||
5: dec r23 ;
|
||||
brne 5b ;/
|
||||
#endif
|
||||
in r0, _SFR_IO_ADDR(SREG) ;Save flags
|
||||
|
||||
com r24 ;C = start bit
|
||||
ldi r25, 10 ;Bit counter
|
||||
cli ;Start critical section
|
||||
|
||||
1: ldi r23, BPS-1 ;----- Bit transferring loop
|
||||
2: dec r23 ;Wait for a bit time
|
||||
brne 2b ;/
|
||||
brcs 3f ;MISO = bit to be sent
|
||||
OUT_1 ;
|
||||
3: brcc 4f ;
|
||||
OUT_0 ;/
|
||||
4: lsr r24 ;Get next bit into C
|
||||
dec r25 ;All bits sent?
|
||||
brne 1b ; no, coutinue
|
||||
|
||||
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
|
||||
ret
|
||||
.endfunc
|
||||
|
||||
|
||||
|
||||
;---------------------------------------------------------------------------;
|
||||
; Receive a byte
|
||||
;
|
||||
;Prototype: uint8_t rcvr (void);
|
||||
;Size: 19 words
|
||||
|
||||
.global rcvr
|
||||
.func rcvr
|
||||
rcvr:
|
||||
in r0, _SFR_IO_ADDR(SREG) ;Save flags
|
||||
|
||||
ldi r24, 0x80 ;Receiving shift reg
|
||||
cli ;Start critical section
|
||||
|
||||
1: SKIP_IN_1 ;Wait for idle
|
||||
rjmp 1b
|
||||
2: SKIP_IN_0 ;Wait for start bit
|
||||
rjmp 2b
|
||||
ldi r25, BPS/2 ;Wait for half bit time
|
||||
3: dec r25
|
||||
brne 3b
|
||||
|
||||
4: ldi r25, BPS ;----- Bit receiving loop
|
||||
5: dec r25 ;Wait for a bit time
|
||||
brne 5b ;/
|
||||
lsr r24 ;Next bit
|
||||
SKIP_IN_0 ;Get a data bit into r24.7
|
||||
ori r24, 0x80
|
||||
brcc 4b ;All bits received? no, continue
|
||||
|
||||
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
|
||||
ret
|
||||
.endfunc
|
||||
|
||||
|
||||
; Not wait for start bit. This should be called after detecting start bit.
|
||||
.global recv
|
||||
.func recv
|
||||
recv:
|
||||
in r0, _SFR_IO_ADDR(SREG) ;Save flags
|
||||
|
||||
ldi r24, 0x80 ;Receiving shift reg
|
||||
cli ;Start critical section
|
||||
|
||||
;1: SKIP_IN_1 ;Wait for idle
|
||||
; rjmp 1b
|
||||
;2: SKIP_IN_0 ;Wait for start bit
|
||||
; rjmp 2b
|
||||
ldi r25, BPS/2 ;Wait for half bit time
|
||||
3: dec r25
|
||||
brne 3b
|
||||
|
||||
4: ldi r25, BPS ;----- Bit receiving loop
|
||||
5: dec r25 ;Wait for a bit time
|
||||
brne 5b ;/
|
||||
lsr r24 ;Next bit
|
||||
SKIP_IN_0 ;Get a data bit into r24.7
|
||||
ori r24, 0x80
|
||||
brcc 4b ;All bits received? no, continue
|
||||
|
||||
ldi r25, BPS/2 ;Wait for half bit time
|
||||
6: dec r25
|
||||
brne 6b
|
||||
7: SKIP_IN_1 ;Wait for stop bit
|
||||
rjmp 7b
|
||||
|
||||
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
|
||||
ret
|
||||
.endfunc
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
#ifndef SUART
|
||||
#define SUART
|
||||
|
||||
void xmit(uint8_t);
|
||||
uint8_t rcvr(void);
|
||||
uint8_t recv(void);
|
||||
|
||||
#endif /* SUART */
|
||||
#ifndef SUART
|
||||
#define SUART
|
||||
|
||||
void xmit(uint8_t);
|
||||
uint8_t rcvr(void);
|
||||
uint8_t recv(void);
|
||||
|
||||
#endif /* SUART */
|
||||
|
|
|
|||
|
|
@ -1,159 +1,159 @@
|
|||
/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
|
||||
#ifndef _AVR_WD_H_
|
||||
#define _AVR_WD_H_
|
||||
|
||||
#include <avr/io.h>
|
||||
|
||||
/*
|
||||
Copyright (c) 2009, Curt Van Maanen
|
||||
|
||||
Permission to use, copy, modify, and/or distribute this software for any
|
||||
purpose with or without fee is hereby granted, provided that the above
|
||||
copyright notice and this permission notice appear in all copies.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
|
||||
|
||||
include usage-
|
||||
#include "wd.h" //if in same directory as project
|
||||
#include <avr/wd.h> //if wd.h is in avr directory
|
||||
|
||||
set watchdog modes and prescale
|
||||
|
||||
usage-
|
||||
WD_SET(mode,[timeout]); //prescale always set
|
||||
|
||||
modes-
|
||||
WD_OFF disabled
|
||||
WD_RST normal reset mode
|
||||
WD_IRQ interrupt only mode (if supported)
|
||||
WD_RST_IRQ interrupt+reset mode (if supported)
|
||||
|
||||
timeout-
|
||||
WDTO_15MS default if no timeout provided
|
||||
WDTO_30MS
|
||||
WDTO_60MS
|
||||
WDTO_120MS
|
||||
WDTO_250MS
|
||||
WDTO_500MS
|
||||
WDTO_1S
|
||||
WDTO_2S
|
||||
WDTO_4S (if supported)
|
||||
WDTO_8S (if supported)
|
||||
|
||||
examples-
|
||||
WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout
|
||||
WD_SET(WD_OFF); //watchdog disabled (if not fused on)
|
||||
WD_SET(WD_RST); //reset mode, 15ms (default timeout)
|
||||
WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout
|
||||
WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
|
||||
|
||||
|
||||
for enhanced watchdogs, if the watchdog is not being used WDRF should be
|
||||
cleared on every power up or reset, along with disabling the watchdog-
|
||||
WD_DISABLE(); //clear WDRF, then turn off watchdog
|
||||
|
||||
*/
|
||||
|
||||
//reset registers to the same name (MCUCSR)
|
||||
#if !defined(MCUCSR)
|
||||
#define MCUCSR MCUSR
|
||||
#endif
|
||||
|
||||
//watchdog registers to the same name (WDTCSR)
|
||||
#if !defined(WDTCSR)
|
||||
#define WDTCSR WDTCR
|
||||
#endif
|
||||
|
||||
//if enhanced watchdog, define irq values, create disable macro
|
||||
#if defined(WDIF)
|
||||
#define WD_IRQ 0xC0
|
||||
#define WD_RST_IRQ 0xC8
|
||||
#define WD_DISABLE() do{ \
|
||||
MCUCSR &= ~(1<<WDRF); \
|
||||
WD_SET(WD_OFF); \
|
||||
}while(0)
|
||||
#endif
|
||||
|
||||
//all watchdogs
|
||||
#define WD_RST 8
|
||||
#define WD_OFF 0
|
||||
|
||||
//prescale values
|
||||
#define WDTO_15MS 0
|
||||
#define WDTO_30MS 1
|
||||
#define WDTO_60MS 2
|
||||
#define WDTO_120MS 3
|
||||
#define WDTO_250MS 4
|
||||
#define WDTO_500MS 5
|
||||
#define WDTO_1S 6
|
||||
#define WDTO_2S 7
|
||||
|
||||
//prescale values for avrs with WDP3
|
||||
#if defined(WDP3)
|
||||
#define WDTO_4S 0x20
|
||||
#define WDTO_8S 0x21
|
||||
#endif
|
||||
|
||||
//watchdog reset
|
||||
#define WDR() __asm__ __volatile__("wdr")
|
||||
|
||||
//avr reset using watchdog
|
||||
#define WD_AVR_RESET() do{ \
|
||||
__asm__ __volatile__("cli"); \
|
||||
WD_SET_UNSAFE(WD_RST); \
|
||||
while(1); \
|
||||
}while(0)
|
||||
|
||||
/*set the watchdog-
|
||||
1. save SREG
|
||||
2. turn off irq's
|
||||
3. reset watchdog timer
|
||||
4. enable watchdog change
|
||||
5. write watchdog value
|
||||
6. restore SREG (restoring irq status)
|
||||
*/
|
||||
#define WD_SET(val,...) \
|
||||
__asm__ __volatile__( \
|
||||
"in __tmp_reg__,__SREG__" "\n\t" \
|
||||
"cli" "\n\t" \
|
||||
"wdr" "\n\t" \
|
||||
"sts %[wdreg],%[wden]" "\n\t" \
|
||||
"sts %[wdreg],%[wdval]" "\n\t" \
|
||||
"out __SREG__,__tmp_reg__" "\n\t" \
|
||||
: \
|
||||
: [wdreg] "M" (&WDTCSR), \
|
||||
[wden] "r" ((uint8_t)(0x18)), \
|
||||
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
|
||||
: "r0" \
|
||||
)
|
||||
|
||||
/*set the watchdog when I bit in SREG known to be clear-
|
||||
1. reset watchdog timer
|
||||
2. enable watchdog change
|
||||
5. write watchdog value
|
||||
*/
|
||||
#define WD_SET_UNSAFE(val,...) \
|
||||
__asm__ __volatile__( \
|
||||
"wdr" "\n\t" \
|
||||
"sts %[wdreg],%[wden]" "\n\t" \
|
||||
"sts %[wdreg],%[wdval]" "\n\t" \
|
||||
: \
|
||||
: [wdreg] "M" (&WDTCSR), \
|
||||
[wden] "r" ((uint8_t)(0x18)), \
|
||||
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
|
||||
)
|
||||
|
||||
|
||||
//for compatibility with avr/wdt.h
|
||||
#define wdt_enable(val) WD_SET(WD_RST,val)
|
||||
#define wdt_disable() WD_SET(WD_OFF)
|
||||
|
||||
|
||||
#endif /* _AVR_WD_H_ */
|
||||
/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
|
||||
#ifndef _AVR_WD_H_
|
||||
#define _AVR_WD_H_
|
||||
|
||||
#include <avr/io.h>
|
||||
|
||||
/*
|
||||
Copyright (c) 2009, Curt Van Maanen
|
||||
|
||||
Permission to use, copy, modify, and/or distribute this software for any
|
||||
purpose with or without fee is hereby granted, provided that the above
|
||||
copyright notice and this permission notice appear in all copies.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
|
||||
|
||||
include usage-
|
||||
#include "wd.h" //if in same directory as project
|
||||
#include <avr/wd.h> //if wd.h is in avr directory
|
||||
|
||||
set watchdog modes and prescale
|
||||
|
||||
usage-
|
||||
WD_SET(mode,[timeout]); //prescale always set
|
||||
|
||||
modes-
|
||||
WD_OFF disabled
|
||||
WD_RST normal reset mode
|
||||
WD_IRQ interrupt only mode (if supported)
|
||||
WD_RST_IRQ interrupt+reset mode (if supported)
|
||||
|
||||
timeout-
|
||||
WDTO_15MS default if no timeout provided
|
||||
WDTO_30MS
|
||||
WDTO_60MS
|
||||
WDTO_120MS
|
||||
WDTO_250MS
|
||||
WDTO_500MS
|
||||
WDTO_1S
|
||||
WDTO_2S
|
||||
WDTO_4S (if supported)
|
||||
WDTO_8S (if supported)
|
||||
|
||||
examples-
|
||||
WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout
|
||||
WD_SET(WD_OFF); //watchdog disabled (if not fused on)
|
||||
WD_SET(WD_RST); //reset mode, 15ms (default timeout)
|
||||
WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout
|
||||
WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
|
||||
|
||||
|
||||
for enhanced watchdogs, if the watchdog is not being used WDRF should be
|
||||
cleared on every power up or reset, along with disabling the watchdog-
|
||||
WD_DISABLE(); //clear WDRF, then turn off watchdog
|
||||
|
||||
*/
|
||||
|
||||
//reset registers to the same name (MCUCSR)
|
||||
#if !defined(MCUCSR)
|
||||
#define MCUCSR MCUSR
|
||||
#endif
|
||||
|
||||
//watchdog registers to the same name (WDTCSR)
|
||||
#if !defined(WDTCSR)
|
||||
#define WDTCSR WDTCR
|
||||
#endif
|
||||
|
||||
//if enhanced watchdog, define irq values, create disable macro
|
||||
#if defined(WDIF)
|
||||
#define WD_IRQ 0xC0
|
||||
#define WD_RST_IRQ 0xC8
|
||||
#define WD_DISABLE() do{ \
|
||||
MCUCSR &= ~(1<<WDRF); \
|
||||
WD_SET(WD_OFF); \
|
||||
}while(0)
|
||||
#endif
|
||||
|
||||
//all watchdogs
|
||||
#define WD_RST 8
|
||||
#define WD_OFF 0
|
||||
|
||||
//prescale values
|
||||
#define WDTO_15MS 0
|
||||
#define WDTO_30MS 1
|
||||
#define WDTO_60MS 2
|
||||
#define WDTO_120MS 3
|
||||
#define WDTO_250MS 4
|
||||
#define WDTO_500MS 5
|
||||
#define WDTO_1S 6
|
||||
#define WDTO_2S 7
|
||||
|
||||
//prescale values for avrs with WDP3
|
||||
#if defined(WDP3)
|
||||
#define WDTO_4S 0x20
|
||||
#define WDTO_8S 0x21
|
||||
#endif
|
||||
|
||||
//watchdog reset
|
||||
#define WDR() __asm__ __volatile__("wdr")
|
||||
|
||||
//avr reset using watchdog
|
||||
#define WD_AVR_RESET() do{ \
|
||||
__asm__ __volatile__("cli"); \
|
||||
WD_SET_UNSAFE(WD_RST); \
|
||||
while(1); \
|
||||
}while(0)
|
||||
|
||||
/*set the watchdog-
|
||||
1. save SREG
|
||||
2. turn off irq's
|
||||
3. reset watchdog timer
|
||||
4. enable watchdog change
|
||||
5. write watchdog value
|
||||
6. restore SREG (restoring irq status)
|
||||
*/
|
||||
#define WD_SET(val,...) \
|
||||
__asm__ __volatile__( \
|
||||
"in __tmp_reg__,__SREG__" "\n\t" \
|
||||
"cli" "\n\t" \
|
||||
"wdr" "\n\t" \
|
||||
"sts %[wdreg],%[wden]" "\n\t" \
|
||||
"sts %[wdreg],%[wdval]" "\n\t" \
|
||||
"out __SREG__,__tmp_reg__" "\n\t" \
|
||||
: \
|
||||
: [wdreg] "M" (&WDTCSR), \
|
||||
[wden] "r" ((uint8_t)(0x18)), \
|
||||
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
|
||||
: "r0" \
|
||||
)
|
||||
|
||||
/*set the watchdog when I bit in SREG known to be clear-
|
||||
1. reset watchdog timer
|
||||
2. enable watchdog change
|
||||
5. write watchdog value
|
||||
*/
|
||||
#define WD_SET_UNSAFE(val,...) \
|
||||
__asm__ __volatile__( \
|
||||
"wdr" "\n\t" \
|
||||
"sts %[wdreg],%[wden]" "\n\t" \
|
||||
"sts %[wdreg],%[wdval]" "\n\t" \
|
||||
: \
|
||||
: [wdreg] "M" (&WDTCSR), \
|
||||
[wden] "r" ((uint8_t)(0x18)), \
|
||||
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
|
||||
)
|
||||
|
||||
|
||||
//for compatibility with avr/wdt.h
|
||||
#define wdt_enable(val) WD_SET(WD_RST,val)
|
||||
#define wdt_disable() WD_SET(WD_OFF)
|
||||
|
||||
|
||||
#endif /* _AVR_WD_H_ */
|
||||
|
|
|
|||
|
|
@ -1,161 +1,161 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
|
||||
<info type="description" value="summary">
|
||||
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderCDC.c"/>
|
||||
<build type="header-file" value="BootloaderCDC.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
<build type="header-file" value="Config/AppConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
|
||||
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
|
||||
<require idref="lufa.bootloaders.cdc"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
|
||||
<info type="description" value="summary">
|
||||
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderCDC.c"/>
|
||||
<build type="header-file" value="BootloaderCDC.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
<build type="header-file" value="Config/AppConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
|
||||
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
|
|
@ -1,156 +1,156 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
|
||||
<info type="description" value="summary">
|
||||
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderDFU.c"/>
|
||||
<build type="header-file" value="BootloaderDFU.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
<build type="header-file" value="Config/AppConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
|
||||
<require idref="lufa.bootloaders.dfu"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
|
||||
<info type="description" value="summary">
|
||||
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderDFU.c"/>
|
||||
<build type="header-file" value="BootloaderDFU.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
<build type="header-file" value="Config/AppConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
|
|
@ -1,123 +1,123 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
|
||||
<info type="description" value="summary">
|
||||
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderHID.c"/>
|
||||
<build type="header-file" value="BootloaderHID.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
|
||||
<build type="distribute" subtype="directory" value="HostLoaderApp"/>
|
||||
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
|
||||
</project>
|
||||
|
||||
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
|
||||
<require idref="lufa.bootloaders.hid"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
|
||||
<info type="description" value="summary">
|
||||
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderHID.c"/>
|
||||
<build type="header-file" value="BootloaderHID.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
|
||||
<build type="distribute" subtype="directory" value="HostLoaderApp"/>
|
||||
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
|
|
@ -1,102 +1,102 @@
|
|||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2014.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaims all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#if AUX_BOOT_SECTION_SIZE > 0
|
||||
#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
|
||||
|
||||
; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
|
||||
; on devices where an AUX bootloader section is used.
|
||||
.section .boot_aux_trampoline, "ax"
|
||||
.global Boot_AUX_Trampoline
|
||||
Boot_AUX_Trampoline:
|
||||
jmp BOOT_START_ADDR
|
||||
#endif
|
||||
|
||||
; Trampolines to actual API implementations if the target address is outside the
|
||||
; range of a rjmp instruction (can happen with large bootloader sections)
|
||||
.section .apitable_trampolines, "ax"
|
||||
.global BootloaderAPI_Trampolines
|
||||
BootloaderAPI_Trampolines:
|
||||
|
||||
BootloaderAPI_ErasePage_Trampoline:
|
||||
jmp BootloaderAPI_ErasePage
|
||||
BootloaderAPI_WritePage_Trampoline:
|
||||
jmp BootloaderAPI_WritePage
|
||||
BootloaderAPI_FillWord_Trampoline:
|
||||
jmp BootloaderAPI_FillWord
|
||||
BootloaderAPI_ReadSignature_Trampoline:
|
||||
jmp BootloaderAPI_ReadSignature
|
||||
BootloaderAPI_ReadFuse_Trampoline:
|
||||
jmp BootloaderAPI_ReadFuse
|
||||
BootloaderAPI_ReadLock_Trampoline:
|
||||
jmp BootloaderAPI_ReadLock
|
||||
BootloaderAPI_WriteLock_Trampoline:
|
||||
jmp BootloaderAPI_WriteLock
|
||||
BootloaderAPI_UNUSED1:
|
||||
ret
|
||||
BootloaderAPI_UNUSED2:
|
||||
ret
|
||||
BootloaderAPI_UNUSED3:
|
||||
ret
|
||||
BootloaderAPI_UNUSED4:
|
||||
ret
|
||||
BootloaderAPI_UNUSED5:
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; API function jump table
|
||||
.section .apitable_jumptable, "ax"
|
||||
.global BootloaderAPI_JumpTable
|
||||
BootloaderAPI_JumpTable:
|
||||
|
||||
rjmp BootloaderAPI_ErasePage_Trampoline
|
||||
rjmp BootloaderAPI_WritePage_Trampoline
|
||||
rjmp BootloaderAPI_FillWord_Trampoline
|
||||
rjmp BootloaderAPI_ReadSignature_Trampoline
|
||||
rjmp BootloaderAPI_ReadFuse_Trampoline
|
||||
rjmp BootloaderAPI_ReadLock_Trampoline
|
||||
rjmp BootloaderAPI_WriteLock_Trampoline
|
||||
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
|
||||
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
|
||||
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
|
||||
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
|
||||
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
|
||||
|
||||
|
||||
|
||||
; Bootloader table signatures and information
|
||||
.section .apitable_signatures, "ax"
|
||||
.global BootloaderAPI_Signatures
|
||||
BootloaderAPI_Signatures:
|
||||
|
||||
.long BOOT_START_ADDR ; Start address of the bootloader
|
||||
.word 0xDF30 ; Signature for the MS class bootloader, V1
|
||||
.word 0xDCFB ; Signature for a LUFA class bootloader
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2014.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaims all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#if AUX_BOOT_SECTION_SIZE > 0
|
||||
#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
|
||||
|
||||
; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
|
||||
; on devices where an AUX bootloader section is used.
|
||||
.section .boot_aux_trampoline, "ax"
|
||||
.global Boot_AUX_Trampoline
|
||||
Boot_AUX_Trampoline:
|
||||
jmp BOOT_START_ADDR
|
||||
#endif
|
||||
|
||||
; Trampolines to actual API implementations if the target address is outside the
|
||||
; range of a rjmp instruction (can happen with large bootloader sections)
|
||||
.section .apitable_trampolines, "ax"
|
||||
.global BootloaderAPI_Trampolines
|
||||
BootloaderAPI_Trampolines:
|
||||
|
||||
BootloaderAPI_ErasePage_Trampoline:
|
||||
jmp BootloaderAPI_ErasePage
|
||||
BootloaderAPI_WritePage_Trampoline:
|
||||
jmp BootloaderAPI_WritePage
|
||||
BootloaderAPI_FillWord_Trampoline:
|
||||
jmp BootloaderAPI_FillWord
|
||||
BootloaderAPI_ReadSignature_Trampoline:
|
||||
jmp BootloaderAPI_ReadSignature
|
||||
BootloaderAPI_ReadFuse_Trampoline:
|
||||
jmp BootloaderAPI_ReadFuse
|
||||
BootloaderAPI_ReadLock_Trampoline:
|
||||
jmp BootloaderAPI_ReadLock
|
||||
BootloaderAPI_WriteLock_Trampoline:
|
||||
jmp BootloaderAPI_WriteLock
|
||||
BootloaderAPI_UNUSED1:
|
||||
ret
|
||||
BootloaderAPI_UNUSED2:
|
||||
ret
|
||||
BootloaderAPI_UNUSED3:
|
||||
ret
|
||||
BootloaderAPI_UNUSED4:
|
||||
ret
|
||||
BootloaderAPI_UNUSED5:
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; API function jump table
|
||||
.section .apitable_jumptable, "ax"
|
||||
.global BootloaderAPI_JumpTable
|
||||
BootloaderAPI_JumpTable:
|
||||
|
||||
rjmp BootloaderAPI_ErasePage_Trampoline
|
||||
rjmp BootloaderAPI_WritePage_Trampoline
|
||||
rjmp BootloaderAPI_FillWord_Trampoline
|
||||
rjmp BootloaderAPI_ReadSignature_Trampoline
|
||||
rjmp BootloaderAPI_ReadFuse_Trampoline
|
||||
rjmp BootloaderAPI_ReadLock_Trampoline
|
||||
rjmp BootloaderAPI_WriteLock_Trampoline
|
||||
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
|
||||
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
|
||||
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
|
||||
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
|
||||
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
|
||||
|
||||
|
||||
|
||||
; Bootloader table signatures and information
|
||||
.section .apitable_signatures, "ax"
|
||||
.global BootloaderAPI_Signatures
|
||||
BootloaderAPI_Signatures:
|
||||
|
||||
.long BOOT_START_ADDR ; Start address of the bootloader
|
||||
.word 0xDF30 ; Signature for the MS class bootloader, V1
|
||||
.word 0xDCFB ; Signature for a LUFA class bootloader
|
||||
|
|
|
|||
|
|
@ -1,156 +1,156 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
|
||||
<info type="description" value="summary">
|
||||
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderMassStorage.c"/>
|
||||
<build type="header-file" value="BootloaderMassStorage.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
<build type="header-file" value="Config/AppConfig.h"/>
|
||||
|
||||
<build type="include-path" value="Lib"/>
|
||||
<build type="header-file" value="Lib/VirtualFAT.h"/>
|
||||
<build type="c-source" value="Lib/VirtualFAT.c"/>
|
||||
<build type="header-file" value="Lib/SCSI.h"/>
|
||||
<build type="c-source" value="Lib/SCSI.c"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.mass_storage"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
|
||||
<info type="description" value="summary">
|
||||
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderMassStorage.c"/>
|
||||
<build type="header-file" value="BootloaderMassStorage.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
<build type="header-file" value="Config/AppConfig.h"/>
|
||||
|
||||
<build type="include-path" value="Lib"/>
|
||||
<build type="header-file" value="Lib/VirtualFAT.h"/>
|
||||
<build type="c-source" value="Lib/VirtualFAT.c"/>
|
||||
<build type="header-file" value="Lib/SCSI.h"/>
|
||||
<build type="c-source" value="Lib/SCSI.c"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
|
|
@ -1,68 +1,68 @@
|
|||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2014.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
# Run "make help" for target help.
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
BOARD = USBKEY
|
||||
F_CPU = 8000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = BootloaderMassStorage
|
||||
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
|
||||
LUFA_PATH = ../../LUFA
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
|
||||
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
|
||||
|
||||
# Flash size and bootloader section sizes of the target, in KB. These must
|
||||
# match the target's total FLASH size and the bootloader size set in the
|
||||
# device's fuses.
|
||||
FLASH_SIZE_KB = 128
|
||||
BOOT_SECTION_SIZE_KB = 8
|
||||
|
||||
# Bootloader address calculation formulas
|
||||
# Do not modify these macros, but rather modify the dependent values above.
|
||||
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
|
||||
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
|
||||
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
|
||||
|
||||
# Bootloader linker section flags for relocating the API table sections to
|
||||
# known FLASH addresses - these should not normally be user-edited.
|
||||
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
|
||||
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
|
||||
|
||||
# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
|
||||
# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
|
||||
# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
|
||||
ifeq ($(BOOT_SECTION_SIZE_KB),8)
|
||||
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
|
||||
else
|
||||
AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
|
||||
|
||||
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
|
||||
LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
|
||||
LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
|
||||
endif
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa_core.mk
|
||||
include $(LUFA_PATH)/Build/lufa_sources.mk
|
||||
include $(LUFA_PATH)/Build/lufa_build.mk
|
||||
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
|
||||
include $(LUFA_PATH)/Build/lufa_doxygen.mk
|
||||
include $(LUFA_PATH)/Build/lufa_avrdude.mk
|
||||
include $(LUFA_PATH)/Build/lufa_atprogram.mk
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2014.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
# Run "make help" for target help.
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
BOARD = USBKEY
|
||||
F_CPU = 8000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = BootloaderMassStorage
|
||||
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
|
||||
LUFA_PATH = ../../LUFA
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
|
||||
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
|
||||
|
||||
# Flash size and bootloader section sizes of the target, in KB. These must
|
||||
# match the target's total FLASH size and the bootloader size set in the
|
||||
# device's fuses.
|
||||
FLASH_SIZE_KB = 128
|
||||
BOOT_SECTION_SIZE_KB = 8
|
||||
|
||||
# Bootloader address calculation formulas
|
||||
# Do not modify these macros, but rather modify the dependent values above.
|
||||
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
|
||||
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
|
||||
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
|
||||
|
||||
# Bootloader linker section flags for relocating the API table sections to
|
||||
# known FLASH addresses - these should not normally be user-edited.
|
||||
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
|
||||
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
|
||||
|
||||
# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
|
||||
# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
|
||||
# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
|
||||
ifeq ($(BOOT_SECTION_SIZE_KB),8)
|
||||
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
|
||||
else
|
||||
AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
|
||||
|
||||
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
|
||||
LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
|
||||
LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
|
||||
endif
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa_core.mk
|
||||
include $(LUFA_PATH)/Build/lufa_sources.mk
|
||||
include $(LUFA_PATH)/Build/lufa_build.mk
|
||||
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
|
||||
include $(LUFA_PATH)/Build/lufa_doxygen.mk
|
||||
include $(LUFA_PATH)/Build/lufa_avrdude.mk
|
||||
include $(LUFA_PATH)/Build/lufa_atprogram.mk
|
||||
|
|
|
|||
|
|
@ -1,91 +1,91 @@
|
|||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2014.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaims all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
; Trampolines to actual API implementations if the target address is outside the
|
||||
; range of a rjmp instruction (can happen with large bootloader sections)
|
||||
.section .apitable_trampolines, "ax"
|
||||
.global BootloaderAPI_Trampolines
|
||||
BootloaderAPI_Trampolines:
|
||||
|
||||
BootloaderAPI_ErasePage_Trampoline:
|
||||
jmp BootloaderAPI_ErasePage
|
||||
BootloaderAPI_WritePage_Trampoline:
|
||||
jmp BootloaderAPI_WritePage
|
||||
BootloaderAPI_FillWord_Trampoline:
|
||||
jmp BootloaderAPI_FillWord
|
||||
BootloaderAPI_ReadSignature_Trampoline:
|
||||
jmp BootloaderAPI_ReadSignature
|
||||
BootloaderAPI_ReadFuse_Trampoline:
|
||||
jmp BootloaderAPI_ReadFuse
|
||||
BootloaderAPI_ReadLock_Trampoline:
|
||||
jmp BootloaderAPI_ReadLock
|
||||
BootloaderAPI_WriteLock_Trampoline:
|
||||
jmp BootloaderAPI_WriteLock
|
||||
BootloaderAPI_UNUSED1:
|
||||
ret
|
||||
BootloaderAPI_UNUSED2:
|
||||
ret
|
||||
BootloaderAPI_UNUSED3:
|
||||
ret
|
||||
BootloaderAPI_UNUSED4:
|
||||
ret
|
||||
BootloaderAPI_UNUSED5:
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; API function jump table
|
||||
.section .apitable_jumptable, "ax"
|
||||
.global BootloaderAPI_JumpTable
|
||||
BootloaderAPI_JumpTable:
|
||||
|
||||
rjmp BootloaderAPI_ErasePage_Trampoline
|
||||
rjmp BootloaderAPI_WritePage_Trampoline
|
||||
rjmp BootloaderAPI_FillWord_Trampoline
|
||||
rjmp BootloaderAPI_ReadSignature_Trampoline
|
||||
rjmp BootloaderAPI_ReadFuse_Trampoline
|
||||
rjmp BootloaderAPI_ReadLock_Trampoline
|
||||
rjmp BootloaderAPI_WriteLock_Trampoline
|
||||
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
|
||||
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
|
||||
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
|
||||
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
|
||||
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
|
||||
|
||||
|
||||
|
||||
; Bootloader table signatures and information
|
||||
.section .apitable_signatures, "ax"
|
||||
.global BootloaderAPI_Signatures
|
||||
BootloaderAPI_Signatures:
|
||||
|
||||
.long BOOT_START_ADDR ; Start address of the bootloader
|
||||
.word 0xDF20 ; Signature for the Printer class bootloader
|
||||
.word 0xDCFB ; Signature for a LUFA class bootloader
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2014.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaims all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
; Trampolines to actual API implementations if the target address is outside the
|
||||
; range of a rjmp instruction (can happen with large bootloader sections)
|
||||
.section .apitable_trampolines, "ax"
|
||||
.global BootloaderAPI_Trampolines
|
||||
BootloaderAPI_Trampolines:
|
||||
|
||||
BootloaderAPI_ErasePage_Trampoline:
|
||||
jmp BootloaderAPI_ErasePage
|
||||
BootloaderAPI_WritePage_Trampoline:
|
||||
jmp BootloaderAPI_WritePage
|
||||
BootloaderAPI_FillWord_Trampoline:
|
||||
jmp BootloaderAPI_FillWord
|
||||
BootloaderAPI_ReadSignature_Trampoline:
|
||||
jmp BootloaderAPI_ReadSignature
|
||||
BootloaderAPI_ReadFuse_Trampoline:
|
||||
jmp BootloaderAPI_ReadFuse
|
||||
BootloaderAPI_ReadLock_Trampoline:
|
||||
jmp BootloaderAPI_ReadLock
|
||||
BootloaderAPI_WriteLock_Trampoline:
|
||||
jmp BootloaderAPI_WriteLock
|
||||
BootloaderAPI_UNUSED1:
|
||||
ret
|
||||
BootloaderAPI_UNUSED2:
|
||||
ret
|
||||
BootloaderAPI_UNUSED3:
|
||||
ret
|
||||
BootloaderAPI_UNUSED4:
|
||||
ret
|
||||
BootloaderAPI_UNUSED5:
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; API function jump table
|
||||
.section .apitable_jumptable, "ax"
|
||||
.global BootloaderAPI_JumpTable
|
||||
BootloaderAPI_JumpTable:
|
||||
|
||||
rjmp BootloaderAPI_ErasePage_Trampoline
|
||||
rjmp BootloaderAPI_WritePage_Trampoline
|
||||
rjmp BootloaderAPI_FillWord_Trampoline
|
||||
rjmp BootloaderAPI_ReadSignature_Trampoline
|
||||
rjmp BootloaderAPI_ReadFuse_Trampoline
|
||||
rjmp BootloaderAPI_ReadLock_Trampoline
|
||||
rjmp BootloaderAPI_WriteLock_Trampoline
|
||||
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
|
||||
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
|
||||
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
|
||||
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
|
||||
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
|
||||
|
||||
|
||||
|
||||
; Bootloader table signatures and information
|
||||
.section .apitable_signatures, "ax"
|
||||
.global BootloaderAPI_Signatures
|
||||
BootloaderAPI_Signatures:
|
||||
|
||||
.long BOOT_START_ADDR ; Start address of the bootloader
|
||||
.word 0xDF20 ; Signature for the Printer class bootloader
|
||||
.word 0xDCFB ; Signature for a LUFA class bootloader
|
||||
|
|
|
|||
|
|
@ -1,159 +1,159 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
|
||||
<info type="description" value="summary">
|
||||
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderPrinter.c"/>
|
||||
<build type="header-file" value="BootloaderPrinter.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="at90usb647"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega32u4"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega16u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
|
||||
<require idref="lufa.bootloaders.printer"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8"/>
|
||||
|
||||
<device-support value="atmega8u2"/>
|
||||
<config name="lufa.drivers.board.name" value="none"/>
|
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/>
|
||||
<build type="define" name="F_USB" value="16000000UL"/>
|
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
|
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
|
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
|
||||
<info type="description" value="summary">
|
||||
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="Bootloaders"/>
|
||||
<keyword value="USB Device"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="include-path" value="."/>
|
||||
<build type="c-source" value="BootloaderPrinter.c"/>
|
||||
<build type="header-file" value="BootloaderPrinter.h"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
<build type="c-source" value="BootloaderAPI.c"/>
|
||||
<build type="header-file" value="BootloaderAPI.h"/>
|
||||
<build type="asm-source" value="BootloaderAPITable.S"/>
|
||||
|
||||
<build type="module-config" subtype="path" value="Config"/>
|
||||
<build type="header-file" value="Config/LUFAConfig.h"/>
|
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/>
|
||||
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
<require idref="lufa.drivers.board.leds"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
|
|
@ -1,55 +1,55 @@
|
|||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2014.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
# Run "make help" for target help.
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
BOARD = USBKEY
|
||||
F_CPU = 8000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = BootloaderPrinter
|
||||
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
|
||||
LUFA_PATH = ../../LUFA
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
|
||||
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
|
||||
|
||||
# Flash size and bootloader section sizes of the target, in KB. These must
|
||||
# match the target's total FLASH size and the bootloader size set in the
|
||||
# device's fuses.
|
||||
FLASH_SIZE_KB = 128
|
||||
BOOT_SECTION_SIZE_KB = 8
|
||||
|
||||
# Bootloader address calculation formulas
|
||||
# Do not modify these macros, but rather modify the dependent values above.
|
||||
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
|
||||
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
|
||||
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
|
||||
|
||||
# Bootloader linker section flags for relocating the API table sections to
|
||||
# known FLASH addresses - these should not normally be user-edited.
|
||||
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
|
||||
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa_core.mk
|
||||
include $(LUFA_PATH)/Build/lufa_sources.mk
|
||||
include $(LUFA_PATH)/Build/lufa_build.mk
|
||||
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
|
||||
include $(LUFA_PATH)/Build/lufa_doxygen.mk
|
||||
include $(LUFA_PATH)/Build/lufa_avrdude.mk
|
||||
include $(LUFA_PATH)/Build/lufa_atprogram.mk
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2014.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
# Run "make help" for target help.
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
BOARD = USBKEY
|
||||
F_CPU = 8000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = BootloaderPrinter
|
||||
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
|
||||
LUFA_PATH = ../../LUFA
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
|
||||
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
|
||||
|
||||
# Flash size and bootloader section sizes of the target, in KB. These must
|
||||
# match the target's total FLASH size and the bootloader size set in the
|
||||
# device's fuses.
|
||||
FLASH_SIZE_KB = 128
|
||||
BOOT_SECTION_SIZE_KB = 8
|
||||
|
||||
# Bootloader address calculation formulas
|
||||
# Do not modify these macros, but rather modify the dependent values above.
|
||||
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
|
||||
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
|
||||
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
|
||||
|
||||
# Bootloader linker section flags for relocating the API table sections to
|
||||
# known FLASH addresses - these should not normally be user-edited.
|
||||
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
|
||||
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
|
||||
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa_core.mk
|
||||
include $(LUFA_PATH)/Build/lufa_sources.mk
|
||||
include $(LUFA_PATH)/Build/lufa_build.mk
|
||||
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
|
||||
include $(LUFA_PATH)/Build/lufa_doxygen.mk
|
||||
include $(LUFA_PATH)/Build/lufa_avrdude.mk
|
||||
include $(LUFA_PATH)/Build/lufa_atprogram.mk
|
||||
|
|
|
|||
|
|
@ -1,42 +1,42 @@
|
|||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2014.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
# Run "make help" for target help.
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
F_CPU = 1000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = HID_EEPROM_Loader
|
||||
SRC = $(TARGET).c
|
||||
LUFA_PATH = ../../../LUFA
|
||||
CC_FLAGS =
|
||||
LD_FLAGS =
|
||||
OBJECT_FILES = InputEEData.o
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Determine the AVR sub-architecture of the build main application object file
|
||||
FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
|
||||
|
||||
# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
|
||||
InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
|
||||
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
|
||||
avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa_core.mk
|
||||
include $(LUFA_PATH)/Build/lufa_build.mk
|
||||
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
|
||||
include $(LUFA_PATH)/Build/lufa_doxygen.mk
|
||||
include $(LUFA_PATH)/Build/lufa_hid.mk
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2014.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
# Run "make help" for target help.
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
F_CPU = 1000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = HID_EEPROM_Loader
|
||||
SRC = $(TARGET).c
|
||||
LUFA_PATH = ../../../LUFA
|
||||
CC_FLAGS =
|
||||
LD_FLAGS =
|
||||
OBJECT_FILES = InputEEData.o
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Determine the AVR sub-architecture of the build main application object file
|
||||
FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
|
||||
|
||||
# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
|
||||
InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
|
||||
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
|
||||
avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa_core.mk
|
||||
include $(LUFA_PATH)/Build/lufa_build.mk
|
||||
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
|
||||
include $(LUFA_PATH)/Build/lufa_doxygen.mk
|
||||
include $(LUFA_PATH)/Build/lufa_hid.mk
|
||||
|
|
|
|||
|
|
@ -1,55 +1,55 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
|
||||
<require idref="lufa.templates.device"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8_template"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
</project>
|
||||
|
||||
<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
|
||||
<require idref="lufa.templates.device"/>
|
||||
<require idref="lufa.boards.dummy.xmega"/>
|
||||
<generator value="as5_8_template"/>
|
||||
|
||||
<device-support value="atxmega256a3bu"/>
|
||||
<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/>
|
||||
<build type="define" name="F_USB" value="48000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.templates.device" caption="USB Device Template">
|
||||
<info type="description" value="summary">
|
||||
Template for a LUFA USB device mode application.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="USB Device"/>
|
||||
<keyword value="Template Projects"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="c-source" value="DeviceApplication.c"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="DeviceApplication.h"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
|
||||
<build type="module-config" subtype="path" value=".."/>
|
||||
<build type="header-file" value="../LUFAConfig.h"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
|
||||
<require idref="lufa.templates.device"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8_template"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
</project>
|
||||
|
||||
<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
|
||||
<require idref="lufa.templates.device"/>
|
||||
<require idref="lufa.boards.dummy.xmega"/>
|
||||
<generator value="as5_8_template"/>
|
||||
|
||||
<device-support value="atxmega256a3bu"/>
|
||||
<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/>
|
||||
<build type="define" name="F_USB" value="48000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.templates.device" caption="USB Device Template">
|
||||
<info type="description" value="summary">
|
||||
Template for a LUFA USB device mode application.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="USB Device"/>
|
||||
<keyword value="Template Projects"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="c-source" value="DeviceApplication.c"/>
|
||||
<build type="c-source" value="Descriptors.c"/>
|
||||
<build type="header-file" value="DeviceApplication.h"/>
|
||||
<build type="header-file" value="Descriptors.h"/>
|
||||
|
||||
<build type="module-config" subtype="path" value=".."/>
|
||||
<build type="header-file" value="../LUFAConfig.h"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
|
|
@ -1,41 +1,41 @@
|
|||
<asf xmlversion="1.0">
|
||||
<project caption="USB Host Template" id="lufa.templates.host.project">
|
||||
<require idref="lufa.templates.host"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8_template"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.templates.host" caption="USB Host Template">
|
||||
<info type="description" value="summary">
|
||||
Template for a LUFA USB host mode application.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="USB Host"/>
|
||||
<keyword value="Template Projects"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="c-source" value="HostApplication.c"/>
|
||||
<build type="header-file" value="HostApplication.h"/>
|
||||
|
||||
<build type="module-config" subtype="path" value=".."/>
|
||||
<build type="header-file" value="../LUFAConfig.h"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
</module>
|
||||
</asf>
|
||||
<asf xmlversion="1.0">
|
||||
<project caption="USB Host Template" id="lufa.templates.host.project">
|
||||
<require idref="lufa.templates.host"/>
|
||||
<require idref="lufa.boards.dummy.avr8"/>
|
||||
<generator value="as5_8_template"/>
|
||||
|
||||
<device-support value="at90usb1287"/>
|
||||
<config name="lufa.drivers.board.name" value="usbkey"/>
|
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/>
|
||||
<build type="define" name="F_USB" value="8000000UL"/>
|
||||
</project>
|
||||
|
||||
<module type="application" id="lufa.templates.host" caption="USB Host Template">
|
||||
<info type="description" value="summary">
|
||||
Template for a LUFA USB host mode application.
|
||||
</info>
|
||||
|
||||
<info type="gui-flag" value="move-to-root"/>
|
||||
|
||||
<info type="keyword" value="Technology">
|
||||
<keyword value="USB Host"/>
|
||||
<keyword value="Template Projects"/>
|
||||
</info>
|
||||
|
||||
<device-support-alias value="lufa_avr8"/>
|
||||
<device-support-alias value="lufa_xmega"/>
|
||||
<device-support-alias value="lufa_uc3"/>
|
||||
|
||||
<build type="c-source" value="HostApplication.c"/>
|
||||
<build type="header-file" value="HostApplication.h"/>
|
||||
|
||||
<build type="module-config" subtype="path" value=".."/>
|
||||
<build type="header-file" value="../LUFAConfig.h"/>
|
||||
|
||||
<require idref="lufa.common"/>
|
||||
<require idref="lufa.platform"/>
|
||||
<require idref="lufa.drivers.usb"/>
|
||||
<require idref="lufa.drivers.board"/>
|
||||
</module>
|
||||
</asf>
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
Loading…
Add table
Add a link
Reference in a new issue