[Keyboard] Added Krush Solder (60% & 65%) (#15074)
This commit is contained in:
Sắn
GitHub
parent
1989eb17ec
commit
a4eb73eef0
63 changed files with 3293 additions and 0 deletions
25
keyboards/sawnsprojects/krush/krush60/readme.md
Normal file
25
keyboards/sawnsprojects/krush/krush60/readme.md
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
# Krush60
|
||||
|
||||
A 60% keyboard sold in several variants.
|
||||
|
||||
1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.
|
||||
|
||||
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
|
||||
|
||||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
|
||||
* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
|
||||
* Hardware Availability: [Mechkey.store](https://mechkey.store/)
|
||||
|
||||
Make examples for this keyboard (after setting up your build environment):
|
||||
|
||||
make sawnsprojects/krush/krush60/solder:default
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
60
keyboards/sawnsprojects/krush/krush60/solder/config.h
Normal file
60
keyboards/sawnsprojects/krush/krush60/solder/config.h
Normal file
|
|
@ -0,0 +1,60 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x5350
|
||||
#define PRODUCT_ID 0x6B32
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER SawnsProjects
|
||||
#define PRODUCT Krush60 - Solder
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
/* Caps Lock */
|
||||
#define LED_CAPS_LOCK_PIN F0
|
||||
|
||||
#define RGB_DI_PIN F1
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_SNAKE
|
||||
#define RGBLIGHT_EFFECT_KNIGHT
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_RGB_TEST
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
#endif
|
||||
1274
keyboards/sawnsprojects/krush/krush60/solder/info.json
Normal file
1274
keyboards/sawnsprojects/krush/krush60/solder/info.json
Normal file
File diff suppressed because it is too large
Load diff
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder full layout
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_7u_spc(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi 7U
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_7u_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi 7U arrow
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_bs(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_bs(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow split backspace
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_bs_7u_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_bs_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow, 7u spacebar & split backspace
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_bs_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_bs_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow, split spacebar & split backspace
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_arrow_split_spc(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_arrow_split_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout ansi arrow & split spacebar
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout split backspace
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs_7u_spc(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL),
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs_7u_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout 7u spacebar & split backspace
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_bs_spc(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
[1] = LAYOUT_60_ansi_split_bs_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout split spacebar & split backspace
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_split_spc(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
[1] = LAYOUT_60_ansi_split_spc(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder layout split backspace
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_tsangan(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_tsangan(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder Tsangan
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_60_ansi_tsangan_split_bs(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL
|
||||
)
|
||||
[1] = LAYOUT_60_ansi_tsangan_split_bs(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap for krush60 solder Tsangan & split backspace
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/*
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
|
||||
* │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
|
||||
* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
|
||||
* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │
|
||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤
|
||||
* │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │
|
||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
|
||||
* │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
|
||||
*/
|
||||
[0] = LAYOUT_60_ansi(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap default for krush60
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(0), KC_LEFT, KC_LALT, KC_LCTL
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[3] = LAYOUT_all(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The keymap VIA for krush60
|
||||
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
||||
15
keyboards/sawnsprojects/krush/krush60/solder/readme.md
Normal file
15
keyboards/sawnsprojects/krush/krush60/solder/readme.md
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
# Krush60 solder
|
||||
|
||||
|
||||
|
||||
A 60% keyboard PCB made and sold by SawnsProjects with Nuxros in [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674).
|
||||
|
||||
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
|
||||
* Hardware Supported: 60% keyboard case
|
||||
* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make sawnsprojects/krush60/solder:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
22
keyboards/sawnsprojects/krush/krush60/solder/rules.mk
Normal file
22
keyboards/sawnsprojects/krush/krush60/solder/rules.mk
Normal file
|
|
@ -0,0 +1,22 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
|
||||
LAYOUTS = 60_ansi 60_ansi_arrow 60_ansi_arrow_split_bs_7u_spc
|
||||
17
keyboards/sawnsprojects/krush/krush60/solder/solder.c
Normal file
17
keyboards/sawnsprojects/krush/krush60/solder/solder.c
Normal file
|
|
@ -0,0 +1,17 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "solder.h"
|
||||
335
keyboards/sawnsprojects/krush/krush60/solder/solder.h
Normal file
335
keyboards/sawnsprojects/krush/krush60/solder/solder.h
Normal file
|
|
@ -0,0 +1,335 @@
|
|||
/* Copyright 2021 SawnsProjects
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
//x
|
||||
#define LAYOUT_all( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
|
||||
//LAYOUT_60_ansi
|
||||
//x
|
||||
#define LAYOUT_60_ansi( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_iso
|
||||
//x
|
||||
#define LAYOUT_60_iso(\
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_bs
|
||||
#define LAYOUT_60_ansi_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_spc
|
||||
#define LAYOUT_60_ansi_split_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_bs_spc
|
||||
#define LAYOUT_60_ansi_split_bs_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_7u_spc
|
||||
#define LAYOUT_60_ansi_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_split_7u_spc
|
||||
#define LAYOUT_60_ansi_split_bs_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_split_bs
|
||||
#define LAYOUT_60_ansi_arrow_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_split_spc
|
||||
#define LAYOUT_60_ansi_arrow_split_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_split_bs_spc
|
||||
#define LAYOUT_60_ansi_arrow_split_bs_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow_7u_spc
|
||||
#define LAYOUT_60_ansi_arrow_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_arrow
|
||||
//x
|
||||
#define LAYOUT_60_ansi_arrow( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K94, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \
|
||||
}
|
||||
//x
|
||||
//LAYOUT_60_ansi_arrow_split_bs_7u_spc
|
||||
#define LAYOUT_60_ansi_arrow_split_bs_7u_spc( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K86, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_tsangan
|
||||
#define LAYOUT_60_ansi_tsangan( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_ansi_tsangan_split_bs
|
||||
#define LAYOUT_60_ansi_tsangan_split_bs( \
|
||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \
|
||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \
|
||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \
|
||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \
|
||||
K80, K90, K81, K92, K85, K95, K97 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \
|
||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \
|
||||
{ K70, K71, K72, K73, K74, xxx, XXX, K77 }, \
|
||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \
|
||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \
|
||||
}
|
||||
//LAYOUT_60_iso_tsangan
|
||||
#define LAYOUT_60_iso_tsangan LAYOUT_60_ansi_tsangan
|
||||
//LAYOUT_60_iso_tsangan_split_bs
|
||||
#define LAYOUT_60_iso_tsangan_split_bs LAYOUT_60_ansi_tsangan_split_bs
|
||||
|
||||
|
||||
Loading…
Add table
Add a link
Reference in a new issue