[Keyboard] move latincompass's boards to /latincompass (#16039)

keyboards/latincompass/latin47ble/config.h

@@ -0,0 +1,125 @@
+ /* Copyright 2020 haierwangwei2005
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */ 
+#define VENDOR_ID       0x6C63 // "lc" = latincompass
+#define PRODUCT_ID      0x6C62 // "lb" = latin47BLE
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    latincompass
+#define PRODUCT         Latin47BLE
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { D6, D7, B5, B6 ,C6, C7, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN B7
+#ifdef RGB_DI_PIN
+     #define RGBLED_NUM 3
+     #define RGBLIGHT_HUE_STEP 8
+     #define RGBLIGHT_SAT_STEP 8
+     #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+     #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+#define TAPPING_TERM 250
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define VIA_HAS_BROKEN_KEYCODES