Keymap: Wanleg userspace (#3670)

* configure wanleg userspace

* additional layout support

* additional layout support

* userspace edits

* fix swap hands between 30 and 40 percent

* add additional keymaps

* userspace edits

* userspace configuration

* userspace configuration

* Update readme.md

* userspace work

* swap hands userspace fix

* made requested edits

* Update readme.md

* use relative paths instead of copying file

* Update wanleg.h

* fixing layer order

layouts/community/ortho_4x12/wanleg/config.h

@@ -0,0 +1,15 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+//QMK DFU settings (ProMicro boards)
+// set top left key as bootloader mode escape key on Lets Split rev2
+#if defined(KEYBOARD_lets_split_rev2)
+#define QMK_LED B0
+#define QMK_ESC_OUTPUT F6 // usually COL
+#define QMK_ESC_INPUT D7 // usually ROW
+#define USE_SERIAL
+#undef USE_I2C
+#define EE_HANDS
+#endif
+
+#endif

layouts/community/ortho_4x12/wanleg/keymap.c

@@ -0,0 +1,67 @@
+#include QMK_KEYBOARD_H
+#include "wanleg.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+#if defined(KEYBOARD_lets_split_rev2)
+[_GK] = LAYOUT_ortho_4x12_wrapper(
+  _______________GherkinLike_0_______________,
+  _______________GherkinLike_1_______________,
+  _______________GherkinLike_2_______________,
+  _______________GherkinLike_3_OneHand_______
+),
+[ONE] = LAYOUT_ortho_4x12_wrapper(
+  _______________Qwerty_Row__0_______________,
+  _______________Qwerty_Row__1_______________,
+  _______________Qwerty_Row__2_______________,
+  KC_LCTL, KC_LGUI, KC_LALT, GHERKIN, SUBTER, SH_T(KC_SPC), KC_SPC, SUPRA, KC_RGUI, KC_RALT, KC_RGUI, KC_RCTL
+),
+#else
+[_GK] = LAYOUT_ortho_4x12_wrapper(
+  _______________GherkinLike_0_______________,
+  _______________GherkinLike_1_______________,
+  _______________GherkinLike_2_______________,
+  _______________GherkinLike_3_______________
+),
+#endif
+[_QW] = LAYOUT_ortho_4x12_wrapper(
+  _______________Qwerty_Row__0_______________,
+  _______________Qwerty_Row__1_______________,
+  _______________Qwerty_Row__2_______________,
+  _______________Qwerty_Row__3_______________
+),
+
+[SUP] = LAYOUT_ortho_4x12_wrapper(
+  ________________SUPRA_Row_0________________,
+  ________________SUPRA_Row_1________________,
+  ________________SUPRA_Row_2________________,
+  ________________SUPRA_Row_3________________
+),
+
+[SUB] = LAYOUT_ortho_4x12_wrapper(
+  _______________SUBTER_Row__0_______________,
+  _______________SUBTER_Row__1_______________,
+  _______________SUBTER_Row__2_______________,
+  _______________SUBTER_Row__3_______________
+),
+
+[NUM] = LAYOUT_ortho_4x12_wrapper(
+  _______________NUMBERS_Row_0_______________,
+  _______________NUMBERS_Row_1_______________,
+  _______________NUMBERS_Row_2_______________,
+  _______________NUMBERS_Row_3_______________
+),
+
+[DIR] = LAYOUT_ortho_4x12_wrapper(
+  _____________DIRECTIONS_Row__0_____________,
+  _____________DIRECTIONS_Row__1_____________,
+  _____________DIRECTIONS_Row__2_____________,
+  _____________DIRECTIONS_Row__3_____________
+),
+
+[ETC] = LAYOUT_ortho_4x12_wrapper(
+  ______________ETCETERA_Row__0______________,
+  ______________ETCETERA_Row__1______________,
+  ______________ETCETERA_Row__2______________,
+  ______________ETCETERA_Row__3______________
+),
+};

layouts/community/ortho_4x12/wanleg/readme.md

@@ -0,0 +1,24 @@
+# Let's Split Flashing  
+(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`)
+## Make the QMK DFU .hex
+`make lets_split/rev2:wanleg:production dfu=qmk` 
+
+## Burning EEPROM settings and Firmware
+Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it.  
+**Burn Left Side With QMK DFU and Firmware**  
+`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`  
+
+**Burn Right Side With QMK DFU and Firmware**  
+`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`  
+
+Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
+
+## Using QMK DFU  
+Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
+`make lets_split/rev2:<keymap>:dfu dfu=qmk`  
+The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina` 
+
+---
+# JJ40 
+## To Do
+- [ ] Mousekeys not working with Userspace for some reason (jj40 only)

layouts/community/ortho_4x12/wanleg/rules.mk

@@ -0,0 +1,6 @@
+AUDIO_ENABLE = no
+SWAP_HANDS_ENABLE = yes
+
+ifeq ($(strip $(KEYBOARD)), jj40)
+	SWAP_HANDS_ENABLE = no
+endif