drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

[QP] Add support for OLED, variable framebuffer bpp (#19997)

Browse source 
Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com>
Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>
Fixup delta frame coordinates after #20296.
This commit is contained in:
Nick Brassel 2023-10-22 13:27:31 +11:00 • committed by GitHub
parent 48d9140cfc
commit 8e614250b4
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
51 changed files with 1610 additions and 497 deletions
Download patch file Download diff file Expand all files Collapse all files

34
drivers/painter/comms/qp_comms_dummy.c Normal file
View file

@ -0,0 +1,34 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#ifdef QUANTUM_PAINTER_DUMMY_COMMS_ENABLE
# include "qp_comms_dummy.h"
static bool dummy_comms_init(painter_device_t device) {
// No-op.
return true;
}
static bool dummy_comms_start(painter_device_t device) {
// No-op.
return true;
}
static void dummy_comms_stop(painter_device_t device) {
// No-op.
}
uint32_t dummy_comms_send(painter_device_t device, const void *data, uint32_t byte_count) {
// No-op.
return byte_count;
}
painter_comms_vtable_t dummy_comms_vtable = {
// These are all effective no-op's because they're not actually needed.
.comms_init = dummy_comms_init,
.comms_start = dummy_comms_start,
.comms_stop = dummy_comms_stop,
.comms_send = dummy_comms_send};
#endif // QUANTUM_PAINTER_DUMMY_COMMS_ENABLE

11
drivers/painter/comms/qp_comms_dummy.h Normal file
View file

@ -0,0 +1,11 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef QUANTUM_PAINTER_DUMMY_COMMS_ENABLE
# include "qp_internal.h"
extern painter_comms_vtable_t dummy_comms_vtable;
#endif // QUANTUM_PAINTER_DUMMY_COMMS_ENABLE

94
drivers/painter/comms/qp_comms_i2c.c Normal file
View file

@ -0,0 +1,94 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#ifdef QUANTUM_PAINTER_I2C_ENABLE
# include "i2c_master.h"
# include "qp_comms_i2c.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Helpers
static uint32_t qp_comms_i2c_send_raw(painter_device_t device, const void *data, uint32_t byte_count) {
painter_driver_t * driver = (painter_driver_t *)device;
qp_comms_i2c_config_t *comms_config = (qp_comms_i2c_config_t *)driver->comms_config;
i2c_status_t res = i2c_transmit(comms_config->chip_address << 1, data, byte_count, I2C_TIMEOUT);
if (res < 0) {
return 0;
}
return byte_count;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Base I2C support
bool qp_comms_i2c_init(painter_device_t device) {
i2c_init();
return true;
}
bool qp_comms_i2c_start(painter_device_t device) {
painter_driver_t * driver = (painter_driver_t *)device;
qp_comms_i2c_config_t *comms_config = (qp_comms_i2c_config_t *)driver->comms_config;
return i2c_start(comms_config->chip_address << 1) == I2C_STATUS_SUCCESS;
}
uint32_t qp_comms_i2c_send_data(painter_device_t device, const void *data, uint32_t byte_count) {
return qp_comms_i2c_send_raw(device, data, byte_count);
}
void qp_comms_i2c_stop(painter_device_t device) {
i2c_stop();
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Command+Data I2C support
static const uint8_t cmd_byte = 0x00;
static const uint8_t data_byte = 0x40;
void qp_comms_i2c_cmddata_send_command(painter_device_t device, uint8_t cmd) {
uint8_t buf[2] = {cmd_byte, cmd};
qp_comms_i2c_send_raw(device, &buf, 2);
}
uint32_t qp_comms_i2c_cmddata_send_data(painter_device_t device, const void *data, uint32_t byte_count) {
uint8_t buf[1 + byte_count];
buf[0] = data_byte;
memcpy(&buf[1], data, byte_count);
if (qp_comms_i2c_send_raw(device, buf, sizeof(buf)) != sizeof(buf)) {
return 0;
}
return byte_count;
}
void qp_comms_i2c_bulk_command_sequence(painter_device_t device, const uint8_t *sequence, size_t sequence_len) {
uint8_t buf[32];
for (size_t i = 0; i < sequence_len;) {
uint8_t command = sequence[i];
uint8_t delay = sequence[i + 1];
uint8_t num_bytes = sequence[i + 2];
buf[0] = cmd_byte;
buf[1] = command;
memcpy(&buf[2], &sequence[i + 3], num_bytes);
qp_comms_i2c_send_raw(device, buf, num_bytes + 2);
if (delay > 0) {
wait_ms(delay);
}
i += (3 + num_bytes);
}
}
const painter_comms_with_command_vtable_t i2c_comms_cmddata_vtable = {
.base =
{
.comms_init = qp_comms_i2c_init,
.comms_start = qp_comms_i2c_start,
.comms_send = qp_comms_i2c_cmddata_send_data,
.comms_stop = qp_comms_i2c_stop,
},
.send_command = qp_comms_i2c_cmddata_send_command,
.bulk_command_sequence = qp_comms_i2c_bulk_command_sequence,
};
#endif // QUANTUM_PAINTER_I2C_ENABLE

28
drivers/painter/comms/qp_comms_i2c.h Normal file
View file

@ -0,0 +1,28 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef QUANTUM_PAINTER_I2C_ENABLE
# include <stdint.h>
# include "gpio.h"
# include "qp_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Base I2C support
typedef struct qp_comms_i2c_config_t {
uint8_t chip_address;
} qp_comms_i2c_config_t;
bool qp_comms_i2c_init(painter_device_t device);
bool qp_comms_i2c_start(painter_device_t device);
uint32_t qp_comms_i2c_send_data(painter_device_t device, const void* data, uint32_t byte_count);
void qp_comms_i2c_stop(painter_device_t device);
extern const painter_comms_with_command_vtable_t i2c_comms_cmddata_vtable;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
#endif // QUANTUM_PAINTER_I2C_ENABLE

10
drivers/painter/comms/qp_comms_spi.c
View file

@ -105,13 +105,21 @@ void qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd) {
}
void qp_comms_spi_dc_reset_bulk_command_sequence(painter_device_t device, const uint8_t *sequence, size_t sequence_len) {
painter_driver_t * driver = (painter_driver_t *)device;
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
for (size_t i = 0; i < sequence_len;) {
uint8_t command = sequence[i];
uint8_t delay = sequence[i + 1];
uint8_t num_bytes = sequence[i + 2];
qp_comms_spi_dc_reset_send_command(device, command);
if (num_bytes > 0) {
qp_comms_spi_dc_reset_send_data(device, &sequence[i + 3], num_bytes);
if (comms_config->command_params_uses_command_pin) {
for (uint8_t j = 0; j < num_bytes; j++) {
qp_comms_spi_dc_reset_send_command(device, sequence[i + 3 + j]);
}
} else {
qp_comms_spi_dc_reset_send_data(device, &sequence[i + 3], num_bytes);
}
}
if (delay > 0) {
wait_ms(delay);

2
drivers/painter/comms/qp_comms_spi.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef QUANTUM_PAINTER_SPI_ENABLE
@ -36,6 +35,7 @@ typedef struct qp_comms_spi_dc_reset_config_t {
qp_comms_spi_config_t spi_config;
pin_t dc_pin;
pin_t reset_pin;
bool command_params_uses_command_pin; // keep D/C held low when sending command sequences for data bytes
} qp_comms_spi_dc_reset_config_t;
void qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd);

16
drivers/painter/gc9a01/qp_gc9a01.c
View file

@ -2,7 +2,6 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include <wait.h>
#include "qp_internal.h"
#include "qp_comms.h"
#include "qp_gc9a01.h"
@ -135,13 +134,14 @@ painter_device_t qp_gc9a01_make_spi_device(uint16_t panel_width, uint16_t panel_
driver->base.offset_y = 0;
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

1
drivers/painter/gc9a01/qp_gc9a01.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Paul Cotter (@gr1mr3aver)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"

1
drivers/painter/gc9a01/qp_gc9a01_opcodes.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Paul Cotter (@gr1mr3aver)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

284
drivers/painter/generic/qp_rgb565_surface.c
View file

@ -1,284 +0,0 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "color.h"
#include "qp_rgb565_surface.h"
#include "qp_draw.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Common
// Device definition
typedef struct rgb565_surface_painter_device_t {
painter_driver_t base; // must be first, so it can be cast to/from the painter_device_t* type
// The target buffer
uint16_t *buffer;
// Manually manage the viewport for streaming pixel data to the display
uint16_t viewport_l;
uint16_t viewport_t;
uint16_t viewport_r;
uint16_t viewport_b;
// Current write location to the display when streaming pixel data
uint16_t pixdata_x;
uint16_t pixdata_y;
// Maintain a dirty region so we can stream only what we need
bool is_dirty;
uint16_t dirty_l;
uint16_t dirty_t;
uint16_t dirty_r;
uint16_t dirty_b;
} rgb565_surface_painter_device_t;
// Driver storage
rgb565_surface_painter_device_t surface_drivers[RGB565_SURFACE_NUM_DEVICES] = {0};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Helpers
static inline void increment_pixdata_location(rgb565_surface_painter_device_t *surface) {
// Increment the X-position
surface->pixdata_x++;
// If the x-coord has gone past the right-side edge, loop it back around and increment the y-coord
if (surface->pixdata_x > surface->viewport_r) {
surface->pixdata_x = surface->viewport_l;
surface->pixdata_y++;
}
// If the y-coord has gone past the bottom, loop it back to the top
if (surface->pixdata_y > surface->viewport_b) {
surface->pixdata_y = surface->viewport_t;
}
}
static inline void setpixel(rgb565_surface_painter_device_t *surface, uint16_t x, uint16_t y, uint16_t rgb565) {
// Skip messing with the dirty info if the original value already matches
if (surface->buffer[y * surface->base.panel_width + x] != rgb565) {
// Maintain dirty region
if (surface->dirty_l > x) {
surface->dirty_l = x;
}
if (surface->dirty_r < x) {
surface->dirty_r = x;
}
if (surface->dirty_t > y) {
surface->dirty_t = y;
}
if (surface->dirty_b < y) {
surface->dirty_b = y;
}
// Always dirty after a setpixel
surface->is_dirty = true;
// Update the pixel data in the buffer
surface->buffer[y * surface->base.panel_width + x] = rgb565;
}
}
static inline void append_pixel(rgb565_surface_painter_device_t *surface, uint16_t rgb565) {
setpixel(surface, surface->pixdata_x, surface->pixdata_y, rgb565);
increment_pixdata_location(surface);
}
static inline void stream_pixdata(rgb565_surface_painter_device_t *surface, const uint16_t *data, uint32_t native_pixel_count) {
for (uint32_t pixel_counter = 0; pixel_counter < native_pixel_count; ++pixel_counter) {
append_pixel(surface, data[pixel_counter]);
}
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver vtable
static bool qp_rgb565_surface_init(painter_device_t device, painter_rotation_t rotation) {
painter_driver_t * driver = (painter_driver_t *)device;
rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
memset(surface->buffer, 0, driver->panel_width * driver->panel_height * driver->native_bits_per_pixel / 8);
return true;
}
static bool qp_rgb565_surface_power(painter_device_t device, bool power_on) {
// No-op.
return true;
}
static bool qp_rgb565_surface_clear(painter_device_t device) {
painter_driver_t *driver = (painter_driver_t *)device;
driver->driver_vtable->init(device, driver->rotation); // Re-init the surface
return true;
}
static bool qp_rgb565_surface_flush(painter_device_t device) {
painter_driver_t * driver = (painter_driver_t *)device;
rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
surface->dirty_l = surface->dirty_t = UINT16_MAX;
surface->dirty_r = surface->dirty_b = 0;
surface->is_dirty = false;
return true;
}
static bool qp_rgb565_surface_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
painter_driver_t * driver = (painter_driver_t *)device;
rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
// Set the viewport locations
surface->viewport_l = left;
surface->viewport_t = top;
surface->viewport_r = right;
surface->viewport_b = bottom;
// Reset the write location to the top left
surface->pixdata_x = left;
surface->pixdata_y = top;
return true;
}
// Stream pixel data to the current write position in GRAM
static bool qp_rgb565_surface_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
painter_driver_t * driver = (painter_driver_t *)device;
rgb565_surface_painter_device_t *surface = (rgb565_surface_painter_device_t *)driver;
stream_pixdata(surface, (const uint16_t *)pixel_data, native_pixel_count);
return true;
}
// Pixel colour conversion
static bool qp_rgb565_surface_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
for (int16_t i = 0; i < palette_size; ++i) {
RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
uint16_t rgb565 = (((uint16_t)rgb.r) >> 3) << 11 | (((uint16_t)rgb.g) >> 2) << 5 | (((uint16_t)rgb.b) >> 3);
palette[i].rgb565 = __builtin_bswap16(rgb565);
}
return true;
}
// Append pixels to the target location, keyed by the pixel index
static bool qp_rgb565_surface_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
uint16_t *buf = (uint16_t *)target_buffer;
for (uint32_t i = 0; i < pixel_count; ++i) {
buf[pixel_offset + i] = palette[palette_indices[i]].rgb565;
}
return true;
}
// Append data to the target location
static bool qp_rgb565_surface_append_pixdata(painter_device_t device, uint8_t *target_buffer, uint32_t pixdata_offset, uint8_t pixdata_byte) {
target_buffer[pixdata_offset] = pixdata_byte;
return true;
}
const painter_driver_vtable_t rgb565_surface_driver_vtable = {
.init = qp_rgb565_surface_init,
.power = qp_rgb565_surface_power,
.clear = qp_rgb565_surface_clear,
.flush = qp_rgb565_surface_flush,
.pixdata = qp_rgb565_surface_pixdata,
.viewport = qp_rgb565_surface_viewport,
.palette_convert = qp_rgb565_surface_palette_convert_rgb565_swapped,
.append_pixels = qp_rgb565_surface_append_pixels_rgb565,
.append_pixdata = qp_rgb565_surface_append_pixdata,
};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Comms vtable
static bool qp_rgb565_surface_comms_init(painter_device_t device) {
// No-op.
return true;
}
static bool qp_rgb565_surface_comms_start(painter_device_t device) {
// No-op.
return true;
}
static void qp_rgb565_surface_comms_stop(painter_device_t device) {
// No-op.
}
uint32_t qp_rgb565_surface_comms_send(painter_device_t device, const void *data, uint32_t byte_count) {
// No-op.
return byte_count;
}
painter_comms_vtable_t rgb565_surface_driver_comms_vtable = {
// These are all effective no-op's because they're not actually needed.
.comms_init = qp_rgb565_surface_comms_init,
.comms_start = qp_rgb565_surface_comms_start,
.comms_stop = qp_rgb565_surface_comms_stop,
.comms_send = qp_rgb565_surface_comms_send};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Factory function for creating a handle to an rgb565 surface
painter_device_t qp_rgb565_make_surface(uint16_t panel_width, uint16_t panel_height, void *buffer) {
for (uint32_t i = 0; i < RGB565_SURFACE_NUM_DEVICES; ++i) {
rgb565_surface_painter_device_t *driver = &surface_drivers[i];
if (!driver->base.driver_vtable) {
driver->base.driver_vtable = &rgb565_surface_driver_vtable;
driver->base.comms_vtable = &rgb565_surface_driver_comms_vtable;
driver->base.native_bits_per_pixel = 16; // RGB565
driver->base.panel_width = panel_width;
driver->base.panel_height = panel_height;
driver->base.rotation = QP_ROTATION_0;
driver->base.offset_x = 0;
driver->base.offset_y = 0;
driver->buffer = (uint16_t *)buffer;
return (painter_device_t)driver;
}
}
return NULL;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Drawing routine to copy out the dirty region and send it to another device
bool qp_rgb565_surface_draw(painter_device_t surface, painter_device_t display, uint16_t x, uint16_t y) {
painter_driver_t * surface_driver = (painter_driver_t *)surface;
rgb565_surface_painter_device_t *surface_handle = (rgb565_surface_painter_device_t *)surface_driver;
// If we're not dirty... we're done.
if (!surface_handle->is_dirty) {
return true;
}
// Set the target drawing area
bool ok = qp_viewport(display, x + surface_handle->dirty_l, y + surface_handle->dirty_t, x + surface_handle->dirty_r, y + surface_handle->dirty_b);
if (!ok) {
return false;
}
// Housekeeping of the amount of pixels to transfer
uint32_t total_pixel_count = QUANTUM_PAINTER_PIXDATA_BUFFER_SIZE / sizeof(uint16_t);
uint32_t pixel_counter = 0;
uint16_t *target_buffer = (uint16_t *)qp_internal_global_pixdata_buffer;
// Fill the global pixdata area so that we can start transferring to the panel
for (uint16_t y = surface_handle->dirty_t; y <= surface_handle->dirty_b; ++y) {
for (uint16_t x = surface_handle->dirty_l; x <= surface_handle->dirty_r; ++x) {
// Update the target buffer
target_buffer[pixel_counter++] = surface_handle->buffer[y * surface_handle->base.panel_width + x];
// If we've accumulated enough data, send it
if (pixel_counter == total_pixel_count) {
ok = qp_pixdata(display, qp_internal_global_pixdata_buffer, pixel_counter);
if (!ok) {
return false;
}
// Reset the counter
pixel_counter = 0;
}
}
}
// If there's any leftover data, send it
if (pixel_counter > 0) {
ok = qp_pixdata(display, qp_internal_global_pixdata_buffer, pixel_counter);
if (!ok) {
return false;
}
}
// Clear the dirty info for the surface
return qp_flush(surface);
}

42
drivers/painter/generic/qp_rgb565_surface.h
View file

@ -1,42 +0,0 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qp_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter RGB565 surface configurables (add to your keyboard's config.h)
#ifndef RGB565_SURFACE_NUM_DEVICES
/**
* @def This controls the maximum number of surface devices that Quantum Painter can use at any one time.
* Increasing this number allows for multiple framebuffers to be used. Each requires its own RAM allocation.
*/
# define RGB565_SURFACE_NUM_DEVICES 1
#endif
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Forward declarations
#ifdef QUANTUM_PAINTER_RGB565_SURFACE_ENABLE
/**
* Factory method for an RGB565 surface (aka framebuffer).
*
* @param panel_width[in] the width of the display panel
* @param panel_height[in] the height of the display panel
* @param buffer[in] pointer to a preallocated buffer of size `(sizeof(uint16_t) * panel_width * panel_height)`
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_rgb565_make_surface(uint16_t panel_width, uint16_t panel_height, void *buffer);
/**
* Helper method to draw the dirty contents of the framebuffer to the target device.
*
* After successful completion, the dirty area is reset.
*
* @param surface[in] the surface to copy from
* @param display[in] the display to copy into
* @param x[in] the x-location of the original position of the framebuffer
* @param y[in] the y-location of the original position of the framebuffer
* @return whether the draw operation completed successfully
*/
bool qp_rgb565_surface_draw(painter_device_t surface, painter_device_t display, uint16_t x, uint16_t y);
#endif // QUANTUM_PAINTER_RGB565_SURFACE_ENABLE

67
drivers/painter/generic/qp_surface.h Normal file
View file

@ -0,0 +1,67 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "qp_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter surface helpers
// Helper for determining buffer size required for a surface
#define SURFACE_REQUIRED_BUFFER_BYTE_SIZE(w, h, bpp) ((((w) * (h) * (bpp)) + 7) / 8)
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter surface configurables (add to your keyboard's config.h)
#ifndef SURFACE_NUM_DEVICES
/**
* @def This controls the maximum number of surface devices that Quantum Painter can use at any one time.
* Increasing this number allows for multiple framebuffers to be used. Each requires its own RAM allocation.
*/
# define SURFACE_NUM_DEVICES 1
#endif
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Forward declarations
#ifdef QUANTUM_PAINTER_SURFACE_ENABLE
// Surface struct
struct surface_painter_device_t;
typedef struct surface_painter_device_t surface_painter_device_t;
/**
* Factory method for an RGB565 surface (aka framebuffer).
*
* @param panel_width[in] the width of the display panel
* @param panel_height[in] the height of the display panel
* @param buffer[in] pointer to a preallocated uint8_t buffer of size `SURFACE_REQUIRED_BUFFER_BYTE_SIZE(panel_width, panel_height, 16)`
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_make_rgb565_surface(uint16_t panel_width, uint16_t panel_height, void *buffer);
/**
* Factory method for a 1bpp monochrome surface (aka framebuffer).
*
* @param panel_width[in] the width of the display panel
* @param panel_height[in] the height of the display panel
* @param buffer[in] pointer to a preallocated uint8_t buffer of size `SURFACE_REQUIRED_BUFFER_BYTE_SIZE(panel_width, panel_height, 1)`
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_make_mono1bpp_surface(uint16_t panel_width, uint16_t panel_height, void *buffer);
/**
* Helper method to draw the contents of the framebuffer to the target device.
*
* After successful completion, the dirty area is reset.
*
* @param surface[in] the surface to copy from
* @param target[in] the target device to copy into
* @param x[in] the x-location of the original position of the framebuffer
* @param y[in] the y-location of the original position of the framebuffer
* @param entire_surface[in] whether the entire surface should be drawn, instead of just the dirty region
* @return whether the draw operation completed successfully
*/
bool qp_surface_draw(painter_device_t surface, painter_device_t target, uint16_t x, uint16_t y, bool entire_surface);
#endif // QUANTUM_PAINTER_SURFACE_ENABLE

141
drivers/painter/generic/qp_surface_common.c Normal file
View file

@ -0,0 +1,141 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "color.h"
#include "qp_draw.h"
#include "qp_surface_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver storage
surface_painter_device_t surface_drivers[SURFACE_NUM_DEVICES] = {0};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Helpers
void qp_surface_increment_pixdata_location(surface_viewport_data_t *viewport) {
// Increment the X-position
viewport->pixdata_x++;
// If the x-coord has gone past the right-side edge, loop it back around and increment the y-coord
if (viewport->pixdata_x > viewport->viewport_r) {
viewport->pixdata_x = viewport->viewport_l;
viewport->pixdata_y++;
}
// If the y-coord has gone past the bottom, loop it back to the top
if (viewport->pixdata_y > viewport->viewport_b) {
viewport->pixdata_y = viewport->viewport_t;
}
}
void qp_surface_update_dirty(surface_dirty_data_t *dirty, uint16_t x, uint16_t y) {
// Maintain dirty region
if (dirty->l > x) {
dirty->l = x;
dirty->is_dirty = true;
}
if (dirty->r < x) {
dirty->r = x;
dirty->is_dirty = true;
}
if (dirty->t > y) {
dirty->t = y;
dirty->is_dirty = true;
}
if (dirty->b < y) {
dirty->b = y;
dirty->is_dirty = true;
}
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver vtable
bool qp_surface_init(painter_device_t device, painter_rotation_t rotation) {
painter_driver_t * driver = (painter_driver_t *)device;
surface_painter_device_t *surface = (surface_painter_device_t *)driver;
memset(surface->buffer, 0, SURFACE_REQUIRED_BUFFER_BYTE_SIZE(driver->panel_width, driver->panel_height, driver->native_bits_per_pixel));
surface->dirty.l = 0;
surface->dirty.t = 0;
surface->dirty.r = surface->base.panel_width - 1;
surface->dirty.b = surface->base.panel_height - 1;
surface->dirty.is_dirty = true;
return true;
}
bool qp_surface_power(painter_device_t device, bool power_on) {
// No-op.
return true;
}
bool qp_surface_clear(painter_device_t device) {
painter_driver_t *driver = (painter_driver_t *)device;
driver->driver_vtable->init(device, driver->rotation); // Re-init the surface
return true;
}
bool qp_surface_flush(painter_device_t device) {
painter_driver_t * driver = (painter_driver_t *)device;
surface_painter_device_t *surface = (surface_painter_device_t *)driver;
surface->dirty.l = surface->dirty.t = UINT16_MAX;
surface->dirty.r = surface->dirty.b = 0;
surface->dirty.is_dirty = false;
return true;
}
bool qp_surface_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
painter_driver_t * driver = (painter_driver_t *)device;
surface_painter_device_t *surface = (surface_painter_device_t *)driver;
// Set the viewport locations
surface->viewport.viewport_l = left;
surface->viewport.viewport_t = top;
surface->viewport.viewport_r = right;
surface->viewport.viewport_b = bottom;
// Reset the write location to the top left
surface->viewport.pixdata_x = left;
surface->viewport.pixdata_y = top;
return true;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Drawing routine to copy out the dirty region and send it to another device
bool qp_surface_draw(painter_device_t surface, painter_device_t target, uint16_t x, uint16_t y, bool entire_surface) {
painter_driver_t * surface_driver = (painter_driver_t *)surface;
surface_painter_device_t *surface_handle = (surface_painter_device_t *)surface_driver;
painter_driver_t * target_driver = (painter_driver_t *)target;
// If we're not dirty... we're done.
if (!surface_handle->dirty.is_dirty) {
qp_dprintf("qp_surface_draw: ok (not dirty, skipping)\n");
return true;
}
// If we have incompatible bit depths, drop out
if (surface_driver->native_bits_per_pixel != target_driver->native_bits_per_pixel) {
qp_dprintf("qp_surface_draw: fail (incompatible bpp: surface=%d, target=%d)\n", (int)surface_driver->native_bits_per_pixel, (int)target_driver->native_bits_per_pixel);
return false;
}
// Offload to the pixdata transfer function
surface_painter_driver_vtable_t *vtable = (surface_painter_driver_vtable_t *)surface_driver->driver_vtable;
bool ok = vtable->target_pixdata_transfer(surface_driver, target_driver, x, y, entire_surface);
if (!ok) {
qp_dprintf("qp_surface_draw: fail (could not transfer pixel data)\n");
return false;
}
// Clear the dirty info for the surface
ok = qp_flush(surface);
if (!ok) {
qp_dprintf("qp_surface_draw: fail (could not flush)\n");
return false;
}
qp_dprintf("qp_surface_draw: ok\n");
return true;
}

119
drivers/painter/generic/qp_surface_internal.h Normal file
View file

@ -0,0 +1,119 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef QUANTUM_PAINTER_SURFACE_ENABLE
# include "qp_surface.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Internal declarations
// Surface vtable
typedef struct surface_painter_driver_vtable_t {
painter_driver_vtable_t base; // must be first, so it can be cast to/from the painter_driver_vtable_t* type
bool (*target_pixdata_transfer)(painter_driver_t *surface_driver, painter_driver_t *target_driver, uint16_t x, uint16_t y, bool entire_surface);
} surface_painter_driver_vtable_t;
typedef struct surface_dirty_data_t {
bool is_dirty;
uint16_t l;
uint16_t t;
uint16_t r;
uint16_t b;
} surface_dirty_data_t;
typedef struct surface_viewport_data_t {
// Manually manage the viewport for streaming pixel data to the display
uint16_t viewport_l;
uint16_t viewport_t;
uint16_t viewport_r;
uint16_t viewport_b;
// Current write location to the display when streaming pixel data
uint16_t pixdata_x;
uint16_t pixdata_y;
} surface_viewport_data_t;
// Surface struct
typedef struct surface_painter_device_t {
painter_driver_t base; // must be first, so it can be cast to/from the painter_device_t* type
// The target buffer
union {
void * buffer;
uint8_t * u8buffer;
uint16_t *u16buffer;
};
// Manually manage the viewport for streaming pixel data to the display
surface_viewport_data_t viewport;
// Maintain a dirty region so we can stream only what we need
surface_dirty_data_t dirty;
} surface_painter_device_t;
/**
* Factory method for an RGB565 surface (aka framebuffer). Accepts an external device table.
*
* @param device_table[in] the table of devices to use for instantiation
* @param device_table_len[in] the length of the table of devices
* @param panel_width[in] the width of the display panel
* @param panel_height[in] the height of the display panel
* @param buffer[in] pointer to a preallocated uint8_t buffer of size `SURFACE_REQUIRED_BUFFER_BYTE_SIZE(panel_width, panel_height, 16)`
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_make_rgb565_surface_advanced(surface_painter_device_t *device_table, size_t device_table_len, uint16_t panel_width, uint16_t panel_height, void *buffer);
/**
* Factory method for a 1bpp monochrome surface (aka framebuffer).
*
* @param device_table[in] the table of devices to use for instantiation
* @param device_table_len[in] the length of the table of devices
* @param panel_width[in] the width of the display panel
* @param panel_height[in] the height of the display panel
* @param buffer[in] pointer to a preallocated uint8_t buffer of size `SURFACE_REQUIRED_BUFFER_BYTE_SIZE(panel_width, panel_height, 16)`
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_make_mono1bpp_surface_advanced(surface_painter_device_t *device_table, size_t device_table_len, uint16_t panel_width, uint16_t panel_height, void *buffer);
// Driver storage
extern surface_painter_device_t surface_drivers[SURFACE_NUM_DEVICES];
// Surface common APIs
bool qp_surface_init(painter_device_t device, painter_rotation_t rotation);
bool qp_surface_power(painter_device_t device, bool power_on);
bool qp_surface_clear(painter_device_t device);
bool qp_surface_flush(painter_device_t device);
bool qp_surface_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom);
void qp_surface_increment_pixdata_location(surface_viewport_data_t *viewport);
void qp_surface_update_dirty(surface_dirty_data_t *dirty, uint16_t x, uint16_t y);
#endif // QUANTUM_PAINTER_SURFACE_ENABLE
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Factory functions for creating a handle to a surface
#define SURFACE_FACTORY_FUNCTION_IMPL(function_name, vtable, bpp) \
painter_device_t(function_name##_advanced)(surface_painter_device_t * device_table, size_t device_table_len, uint16_t panel_width, uint16_t panel_height, void *buffer) { \
for (uint32_t i = 0; i < device_table_len; ++i) { \
surface_painter_device_t *driver = &device_table[i]; \
if (!driver->base.driver_vtable) { \
driver->base.driver_vtable = (painter_driver_vtable_t *)&(vtable); \
driver->base.native_bits_per_pixel = (bpp); \
driver->base.comms_vtable = &dummy_comms_vtable; \
driver->base.panel_width = panel_width; \
driver->base.panel_height = panel_height; \
driver->base.rotation = QP_ROTATION_0; \
driver->base.offset_x = 0; \
driver->base.offset_y = 0; \
driver->buffer = buffer; \
return (painter_device_t)driver; \
} \
} \
return NULL; \
} \
painter_device_t(function_name)(uint16_t panel_width, uint16_t panel_height, void *buffer) { \
return (function_name##_advanced)(surface_drivers, SURFACE_NUM_DEVICES, panel_width, panel_height, buffer); \
}

113
drivers/painter/generic/qp_surface_mono1bpp.c Normal file
View file

@ -0,0 +1,113 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#ifdef QUANTUM_PAINTER_SURFACE_ENABLE
# include "color.h"
# include "qp_draw.h"
# include "qp_surface_internal.h"
# include "qp_comms_dummy.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Surface driver impl: mono1bpp
static inline void setpixel_mono1bpp(surface_painter_device_t *surface, uint16_t x, uint16_t y, bool mono_pixel) {
uint16_t w = surface->base.panel_width;
uint16_t h = surface->base.panel_height;
// Drop out if it's off-screen
if (x >= w || y >= h) {
return;
}
// Figure out which location needs to be updated
uint32_t pixel_num = y * w + x;
uint32_t byte_offset = pixel_num / 8;
uint8_t bit_offset = pixel_num % 8;
bool curr_val = (surface->u8buffer[byte_offset] & (1 << bit_offset)) ? true : false;
// Skip messing with the dirty info if the original value already matches
if (curr_val != mono_pixel) {
// Update the dirty region
qp_surface_update_dirty(&surface->dirty, x, y);
// Update the pixel data in the buffer
if (mono_pixel) {
surface->u8buffer[byte_offset] |= (1 << bit_offset);
} else {
surface->u8buffer[byte_offset] &= ~(1 << bit_offset);
}
}
}
static inline void append_pixel_mono1bpp(surface_painter_device_t *surface, bool mono_pixel) {
setpixel_mono1bpp(surface, surface->viewport.pixdata_x, surface->viewport.pixdata_y, mono_pixel);
qp_surface_increment_pixdata_location(&surface->viewport);
}
static inline void stream_pixdata_mono1bpp(surface_painter_device_t *surface, const uint8_t *data, uint32_t native_pixel_count) {
for (uint32_t pixel_counter = 0; pixel_counter < native_pixel_count; ++pixel_counter) {
uint32_t byte_offset = pixel_counter / 8;
uint8_t bit_offset = pixel_counter % 8;
append_pixel_mono1bpp(surface, (data[byte_offset] & (1 << bit_offset)) ? true : false);
}
}
// Stream pixel data to the current write position in GRAM
static bool qp_surface_pixdata_mono1bpp(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
painter_driver_t * driver = (painter_driver_t *)device;
surface_painter_device_t *surface = (surface_painter_device_t *)driver;
stream_pixdata_mono1bpp(surface, (const uint8_t *)pixel_data, native_pixel_count);
return true;
}
// Pixel colour conversion
static bool qp_surface_palette_convert_mono1bpp(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
for (int16_t i = 0; i < palette_size; ++i) {
palette[i].mono = (palette[i].hsv888.v > 127) ? 1 : 0;
}
return true;
}
// Append pixels to the target location, keyed by the pixel index
static bool qp_surface_append_pixels_mono1bpp(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
for (uint32_t i = 0; i < pixel_count; ++i) {
uint32_t pixel_num = pixel_offset + i;
uint32_t byte_offset = pixel_num / 8;
uint8_t bit_offset = pixel_num % 8;
if (palette[palette_indices[i]].mono) {
target_buffer[byte_offset] |= (1 << bit_offset);
} else {
target_buffer[byte_offset] &= ~(1 << bit_offset);
}
}
return true;
}
static bool mono1bpp_target_pixdata_transfer(painter_driver_t *surface_driver, painter_driver_t *target_driver, uint16_t x, uint16_t y, bool entire_surface) {
return false; // Not yet supported.
}
static bool qp_surface_append_pixdata_mono1bpp(painter_device_t device, uint8_t *target_buffer, uint32_t pixdata_offset, uint8_t pixdata_byte) {
return false; // Just use 1bpp images.
}
const surface_painter_driver_vtable_t mono1bpp_surface_driver_vtable = {
.base =
{
.init = qp_surface_init,
.power = qp_surface_power,
.clear = qp_surface_clear,
.flush = qp_surface_flush,
.pixdata = qp_surface_pixdata_mono1bpp,
.viewport = qp_surface_viewport,
.palette_convert = qp_surface_palette_convert_mono1bpp,
.append_pixels = qp_surface_append_pixels_mono1bpp,
.append_pixdata = qp_surface_append_pixdata_mono1bpp,
},
.target_pixdata_transfer = mono1bpp_target_pixdata_transfer,
};
SURFACE_FACTORY_FUNCTION_IMPL(qp_make_mono1bpp_surface, mono1bpp_surface_driver_vtable, 1);
#endif // QUANTUM_PAINTER_SURFACE_ENABLE

145
drivers/painter/generic/qp_surface_rgb565.c Normal file
View file

@ -0,0 +1,145 @@
// Copyright 2022 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#ifdef QUANTUM_PAINTER_SURFACE_ENABLE
# include "color.h"
# include "qp_draw.h"
# include "qp_surface_internal.h"
# include "qp_comms_dummy.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Surface driver impl: rgb565
static inline void setpixel_rgb565(surface_painter_device_t *surface, uint16_t x, uint16_t y, uint16_t rgb565) {
uint16_t w = surface->base.panel_width;
uint16_t h = surface->base.panel_height;
// Drop out if it's off-screen
if (x >= w || y >= h) {
return;
}
// Skip messing with the dirty info if the original value already matches
if (surface->u16buffer[y * w + x] != rgb565) {
// Update the dirty region
qp_surface_update_dirty(&surface->dirty, x, y);
// Update the pixel data in the buffer
surface->u16buffer[y * w + x] = rgb565;
}
}
static inline void append_pixel_rgb565(surface_painter_device_t *surface, uint16_t rgb565) {
setpixel_rgb565(surface, surface->viewport.pixdata_x, surface->viewport.pixdata_y, rgb565);
qp_surface_increment_pixdata_location(&surface->viewport);
}
static inline void stream_pixdata_rgb565(surface_painter_device_t *surface, const uint16_t *data, uint32_t native_pixel_count) {
for (uint32_t pixel_counter = 0; pixel_counter < native_pixel_count; ++pixel_counter) {
append_pixel_rgb565(surface, data[pixel_counter]);
}
}
// Stream pixel data to the current write position in GRAM
static bool qp_surface_pixdata_rgb565(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
painter_driver_t * driver = (painter_driver_t *)device;
surface_painter_device_t *surface = (surface_painter_device_t *)driver;
stream_pixdata_rgb565(surface, (const uint16_t *)pixel_data, native_pixel_count);
return true;
}
// Pixel colour conversion
static bool qp_surface_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
for (int16_t i = 0; i < palette_size; ++i) {
RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
uint16_t rgb565 = (((uint16_t)rgb.r) >> 3) << 11 | (((uint16_t)rgb.g) >> 2) << 5 | (((uint16_t)rgb.b) >> 3);
palette[i].rgb565 = __builtin_bswap16(rgb565);
}
return true;
}
// Append pixels to the target location, keyed by the pixel index
static bool qp_surface_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
uint16_t *buf = (uint16_t *)target_buffer;
for (uint32_t i = 0; i < pixel_count; ++i) {
buf[pixel_offset + i] = palette[palette_indices[i]].rgb565;
}
return true;
}
static bool rgb565_target_pixdata_transfer(painter_driver_t *surface_driver, painter_driver_t *target_driver, uint16_t x, uint16_t y, bool entire_surface) {
surface_painter_device_t *surface_handle = (surface_painter_device_t *)surface_driver;
uint16_t l = entire_surface ? 0 : surface_handle->dirty.l;
uint16_t t = entire_surface ? 0 : surface_handle->dirty.t;
uint16_t r = entire_surface ? (surface_handle->base.panel_width - 1) : surface_handle->dirty.r;
uint16_t b = entire_surface ? (surface_handle->base.panel_height - 1) : surface_handle->dirty.b;
// Set the target drawing area
bool ok = qp_viewport((painter_device_t)target_driver, x + l, y + t, x + r, y + b);
if (!ok) {
qp_dprintf("rgb565_target_pixdata_transfer: fail (could not set target viewport)\n");
return false;
}
// Housekeeping of the amount of pixels to transfer
uint32_t total_pixel_count = (8 * QUANTUM_PAINTER_PIXDATA_BUFFER_SIZE) / surface_driver->native_bits_per_pixel;
uint32_t pixel_counter = 0;
uint16_t *target_buffer = (uint16_t *)qp_internal_global_pixdata_buffer;
// Fill the global pixdata area so that we can start transferring to the panel
for (uint16_t y = t; y <= b; ++y) {
for (uint16_t x = l; x <= r; ++x) {
// Update the target buffer
target_buffer[pixel_counter++] = surface_handle->u16buffer[y * surface_handle->base.panel_width + x];
// If we've accumulated enough data, send it
if (pixel_counter == total_pixel_count) {
ok = qp_pixdata((painter_device_t)target_driver, qp_internal_global_pixdata_buffer, pixel_counter);
if (!ok) {
qp_dprintf("rgb565_target_pixdata_transfer: fail (could not stream pixdata to target)\n");
return false;
}
// Reset the counter
pixel_counter = 0;
}
}
}
// If there's any leftover data, send it
if (pixel_counter > 0) {
ok = qp_pixdata((painter_device_t)target_driver, qp_internal_global_pixdata_buffer, pixel_counter);
if (!ok) {
qp_dprintf("rgb565_target_pixdata_transfer: fail (could not stream pixdata to target)\n");
return false;
}
}
return true;
}
static bool qp_surface_append_pixdata_rgb565(painter_device_t device, uint8_t *target_buffer, uint32_t pixdata_offset, uint8_t pixdata_byte) {
target_buffer[pixdata_offset] = pixdata_byte;
return true;
}
const surface_painter_driver_vtable_t rgb565_surface_driver_vtable = {
.base =
{
.init = qp_surface_init,
.power = qp_surface_power,
.clear = qp_surface_clear,
.flush = qp_surface_flush,
.pixdata = qp_surface_pixdata_rgb565,
.viewport = qp_surface_viewport,
.palette_convert = qp_surface_palette_convert_rgb565_swapped,
.append_pixels = qp_surface_append_pixels_rgb565,
.append_pixdata = qp_surface_append_pixdata_rgb565,
},
.target_pixdata_transfer = rgb565_target_pixdata_transfer,
};
SURFACE_FACTORY_FUNCTION_IMPL(qp_make_rgb565_surface, rgb565_surface_driver_vtable, 16);
#endif // QUANTUM_PAINTER_SURFACE_ENABLE

15
drivers/painter/ili9xxx/qp_ili9163.c
View file

@ -103,13 +103,14 @@ painter_device_t qp_ili9163_make_spi_device(uint16_t panel_width, uint16_t panel
driver->base.native_bits_per_pixel = 16; // RGB565
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

1
drivers/painter/ili9xxx/qp_ili9163.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"

15
drivers/painter/ili9xxx/qp_ili9341.c
View file

@ -110,13 +110,14 @@ painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel
driver->base.offset_y = 0;
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

1
drivers/painter/ili9xxx/qp_ili9341.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"

15
drivers/painter/ili9xxx/qp_ili9488.c
View file

@ -103,13 +103,14 @@ painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel
driver->base.offset_y = 0;
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

1
drivers/painter/ili9xxx/qp_ili9488.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"

195
drivers/painter/oled_panel/qp_oled_panel.c Normal file
View file

@ -0,0 +1,195 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "color.h"
#include "qp_internal.h"
#include "qp_comms.h"
#include "qp_draw.h"
#include "qp_oled_panel.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter API implementations
// Power control
bool qp_oled_panel_power(painter_device_t device, bool power_on) {
painter_driver_t * driver = (painter_driver_t *)device;
oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
qp_comms_command(device, power_on ? vtable->opcodes.display_on : vtable->opcodes.display_off);
return true;
}
// Screen clear
bool qp_oled_panel_clear(painter_device_t device) {
painter_driver_t *driver = (painter_driver_t *)device;
driver->driver_vtable->init(device, driver->rotation); // Re-init the display
return true;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Surface passthru
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
bool qp_oled_panel_passthru_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
oled_panel_painter_device_t *driver = (oled_panel_painter_device_t *)device;
return driver->surface.base.validate_ok && driver->surface.base.driver_vtable->pixdata(&driver->surface.base, pixel_data, native_pixel_count);
}
bool qp_oled_panel_passthru_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
oled_panel_painter_device_t *driver = (oled_panel_painter_device_t *)device;
return driver->surface.base.validate_ok && driver->surface.base.driver_vtable->viewport(&driver->surface.base, left, top, right, bottom);
}
bool qp_oled_panel_passthru_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
oled_panel_painter_device_t *driver = (oled_panel_painter_device_t *)device;
return driver->surface.base.validate_ok && driver->surface.base.driver_vtable->palette_convert(&driver->surface.base, palette_size, palette);
}
bool qp_oled_panel_passthru_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
oled_panel_painter_device_t *driver = (oled_panel_painter_device_t *)device;
return driver->surface.base.validate_ok && driver->surface.base.driver_vtable->append_pixels(&driver->surface.base, target_buffer, palette, pixel_offset, pixel_count, palette_indices);
}
bool qp_oled_panel_passthru_append_pixdata(painter_device_t device, uint8_t *target_buffer, uint32_t pixdata_offset, uint8_t pixdata_byte) {
oled_panel_painter_device_t *driver = (oled_panel_painter_device_t *)device;
return driver->surface.base.validate_ok && driver->surface.base.driver_vtable->append_pixdata(&driver->surface.base, target_buffer, pixdata_offset, pixdata_byte);
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Flush helpers
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
void qp_oled_panel_page_column_flush_rot0(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
painter_driver_t * driver = (painter_driver_t *)device;
oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
// TODO: account for offset_x/y in base driver
int min_page = dirty->t / 8;
int max_page = dirty->b / 8;
int min_column = dirty->l;
int max_column = dirty->r;
for (int page = min_page; page <= max_page; ++page) {
int cols_required = max_column - min_column + 1;
uint8_t column_data[cols_required];
memset(column_data, 0, cols_required);
for (int x = min_column; x <= max_column; ++x) {
uint16_t data_offset = x - min_column;
for (int y = 0; y < 8; ++y) {
uint32_t pixel_num = ((page * 8) + y) * driver->panel_width + x;
uint32_t byte_offset = pixel_num / 8;
uint8_t bit_offset = pixel_num % 8;
column_data[data_offset] |= ((framebuffer[byte_offset] & (1 << bit_offset)) >> bit_offset) << y;
}
}
int actual_page = page;
int start_column = min_column;
qp_comms_command(device, vtable->opcodes.set_page | actual_page);
qp_comms_command(device, vtable->opcodes.set_column_lsb | (start_column & 0x0F));
qp_comms_command(device, vtable->opcodes.set_column_msb | (start_column & 0xF0) >> 4);
qp_comms_send(device, column_data, cols_required);
}
}
void qp_oled_panel_page_column_flush_rot90(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
painter_driver_t * driver = (painter_driver_t *)device;
oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
// TODO: account for offset_x/y in base driver
int num_columns = driver->panel_width;
int min_page = dirty->l / 8;
int max_page = dirty->r / 8;
int min_column = dirty->t;
int max_column = dirty->b;
for (int page = min_page; page <= max_page; ++page) {
int cols_required = max_column - min_column + 1;
uint8_t column_data[cols_required];
memset(column_data, 0, cols_required);
for (int y = min_column; y <= max_column; ++y) {
uint16_t data_offset = cols_required - 1 - (y - min_column);
for (int x = 0; x < 8; ++x) {
uint32_t pixel_num = y * driver->panel_height + ((page * 8) + x);
uint32_t byte_offset = pixel_num / 8;
uint8_t bit_offset = pixel_num % 8;
column_data[data_offset] |= ((framebuffer[byte_offset] & (1 << bit_offset)) >> bit_offset) << x;
}
}
int actual_page = page;
int start_column = num_columns - 1 - max_column;
qp_comms_command(device, vtable->opcodes.set_page | actual_page);
qp_comms_command(device, vtable->opcodes.set_column_lsb | (start_column & 0x0F));
qp_comms_command(device, vtable->opcodes.set_column_msb | (start_column & 0xF0) >> 4);
qp_comms_send(device, column_data, cols_required);
}
}
void qp_oled_panel_page_column_flush_rot180(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
painter_driver_t * driver = (painter_driver_t *)device;
oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
// TODO: account for offset_x/y in base driver
int num_pages = driver->panel_height / 8;
int num_columns = driver->panel_width;
int min_page = dirty->t / 8;
int max_page = dirty->b / 8;
int min_column = dirty->l;
int max_column = dirty->r;
for (int page = min_page; page <= max_page; ++page) {
int cols_required = max_column - min_column + 1;
uint8_t column_data[cols_required];
memset(column_data, 0, cols_required);
for (int x = min_column; x <= max_column; ++x) {
uint16_t data_offset = cols_required - 1 - (x - min_column);
for (int y = 0; y < 8; ++y) {
uint32_t pixel_num = ((page * 8) + y) * driver->panel_width + x;
uint32_t byte_offset = pixel_num / 8;
uint8_t bit_offset = pixel_num % 8;
column_data[data_offset] |= ((framebuffer[byte_offset] & (1 << bit_offset)) >> bit_offset) << (7 - y);
}
}
int actual_page = num_pages - 1 - page;
int start_column = num_columns - 1 - max_column;
qp_comms_command(device, vtable->opcodes.set_page | actual_page);
qp_comms_command(device, vtable->opcodes.set_column_lsb | (start_column & 0x0F));
qp_comms_command(device, vtable->opcodes.set_column_msb | (start_column & 0xF0) >> 4);
qp_comms_send(device, column_data, cols_required);
}
}
void qp_oled_panel_page_column_flush_rot270(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
painter_driver_t * driver = (painter_driver_t *)device;
oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
// TODO: account for offset_x/y in base driver
int num_pages = driver->panel_height / 8;
int min_page = dirty->l / 8;
int max_page = dirty->r / 8;
int min_column = dirty->t;
int max_column = dirty->b;
for (int page = min_page; page <= max_page; ++page) {
int cols_required = max_column - min_column + 1;
uint8_t column_data[cols_required];
memset(column_data, 0, cols_required);
for (int y = min_column; y <= max_column; ++y) {
uint16_t data_offset = y - min_column;
for (int x = 0; x < 8; ++x) {
uint32_t pixel_num = y * driver->panel_height + ((page * 8) + x);
uint32_t byte_offset = pixel_num / 8;
uint8_t bit_offset = pixel_num % 8;
column_data[data_offset] |= ((framebuffer[byte_offset] & (1 << bit_offset)) >> bit_offset) << (7 - x);
}
}
int actual_page = num_pages - 1 - page;
int start_column = min_column;
qp_comms_command(device, vtable->opcodes.set_page | actual_page);
qp_comms_command(device, vtable->opcodes.set_column_lsb | (start_column & 0x0F));
qp_comms_command(device, vtable->opcodes.set_column_msb | (start_column & 0xF0) >> 4);
qp_comms_send(device, column_data, cols_required);
}
}

68
drivers/painter/oled_panel/qp_oled_panel.h Normal file
View file

@ -0,0 +1,68 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "color.h"
#include "qp_internal.h"
#include "qp_surface_internal.h"
#ifdef QUANTUM_PAINTER_SPI_ENABLE
# include "qp_comms_spi.h"
#endif // QUANTUM_PAINTER_SPI_ENABLE
#ifdef QUANTUM_PAINTER_I2C_ENABLE
# include "qp_comms_i2c.h"
#endif // QUANTUM_PAINTER_I2C_ENABLE
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Common OLED panel implementation
// Driver vtable with extras
typedef struct oled_panel_painter_driver_vtable_t {
painter_driver_vtable_t base; // must be first, so it can be cast to/from the painter_driver_vtable_t* type
// Opcodes for normal display operation
struct {
uint8_t display_on;
uint8_t display_off;
uint8_t set_page;
uint8_t set_column_lsb;
uint8_t set_column_msb;
} opcodes;
} oled_panel_painter_driver_vtable_t;
// Device definition
typedef struct oled_panel_painter_device_t {
painter_driver_t base; // must be first, so it can be cast to/from the painter_device_t* type
union {
#ifdef QUANTUM_PAINTER_SPI_ENABLE
// SPI-based configurables
qp_comms_spi_dc_reset_config_t spi_dc_reset_config;
#endif // QUANTUM_PAINTER_SPI_ENABLE
#ifdef QUANTUM_PAINTER_I2C_ENABLE
// I2C-based configurables
qp_comms_i2c_config_t i2c_config;
#endif // QUANTUM_PAINTER_I2C_ENABLE
};
surface_painter_device_t surface;
} oled_panel_painter_device_t;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Forward declarations for injecting into concrete driver vtables
bool qp_oled_panel_power(painter_device_t device, bool power_on);
bool qp_oled_panel_clear(painter_device_t device);
bool qp_oled_panel_passthru_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count);
bool qp_oled_panel_passthru_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom);
bool qp_oled_panel_passthru_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
bool qp_oled_panel_passthru_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
bool qp_oled_panel_passthru_append_pixdata(painter_device_t device, uint8_t *target_buffer, uint32_t pixdata_offset, uint8_t pixdata_byte);
// Helpers for flushing data from the dirty region to the correct location on the OLED
void qp_oled_panel_page_column_flush_rot0(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer);
void qp_oled_panel_page_column_flush_rot90(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer);
void qp_oled_panel_page_column_flush_rot180(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer);
void qp_oled_panel_page_column_flush_rot270(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer);

206
drivers/painter/sh1106/qp_sh1106.c Normal file
View file

@ -0,0 +1,206 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qp_internal.h"
#include "qp_comms.h"
#include "qp_oled_panel.h"
#include "qp_sh1106.h"
#include "qp_sh1106_opcodes.h"
#include "qp_surface.h"
#include "qp_surface_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver storage
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
typedef struct sh1106_device_t {
oled_panel_painter_device_t oled;
uint8_t framebuffer[SURFACE_REQUIRED_BUFFER_BYTE_SIZE(128, 64, 1)];
} sh1106_device_t;
static sh1106_device_t sh1106_drivers[SH1106_NUM_DEVICES] = {0};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter API implementations
// Initialisation
__attribute__((weak)) bool qp_sh1106_init(painter_device_t device, painter_rotation_t rotation) {
sh1106_device_t *driver = (sh1106_device_t *)device;
// Change the surface geometry based on the panel rotation
if (rotation == QP_ROTATION_90 || rotation == QP_ROTATION_270) {
driver->oled.surface.base.panel_width = driver->oled.base.panel_height;
driver->oled.surface.base.panel_height = driver->oled.base.panel_width;
} else {
driver->oled.surface.base.panel_width = driver->oled.base.panel_width;
driver->oled.surface.base.panel_height = driver->oled.base.panel_height;
}
// Init the internal surface
if (!qp_init(&driver->oled.surface.base, QP_ROTATION_0)) {
qp_dprintf("Failed to init internal surface in qp_sh1106_init\n");
return false;
}
// clang-format off
const uint8_t sh1106_init_sequence[] = {
// Command, Delay, N, Data[N]
SH1106_SET_MUX_RATIO, 0, 1, 0x3F,
SH1106_DISPLAY_OFFSET, 0, 1, 0x00,
SH1106_DISPLAY_START_LINE, 0, 0,
SH1106_SET_SEGMENT_REMAP_INV, 0, 0,
SH1106_COM_SCAN_DIR_DEC, 0, 0,
SH1106_COM_PADS_HW_CFG, 0, 1, 0x12,
SH1106_SET_CONTRAST, 0, 1, 0x7F,
SH1106_ALL_ON_RESUME, 0, 0,
SH1106_NON_INVERTING_DISPLAY, 0, 0,
SH1106_SET_OSC_DIVFREQ, 0, 1, 0x80,
SH1106_SET_CHARGE_PUMP, 0, 1, 0x14,
SH1106_DISPLAY_ON, 0, 0,
};
// clang-format on
qp_comms_bulk_command_sequence(device, sh1106_init_sequence, sizeof(sh1106_init_sequence));
return true;
}
// Screen flush
bool qp_sh1106_flush(painter_device_t device) {
sh1106_device_t *driver = (sh1106_device_t *)device;
if (!driver->oled.surface.dirty.is_dirty) {
return true;
}
switch (driver->oled.base.rotation) {
default:
case QP_ROTATION_0:
qp_oled_panel_page_column_flush_rot0(device, &driver->oled.surface.dirty, driver->framebuffer);
break;
case QP_ROTATION_90:
qp_oled_panel_page_column_flush_rot90(device, &driver->oled.surface.dirty, driver->framebuffer);
break;
case QP_ROTATION_180:
qp_oled_panel_page_column_flush_rot180(device, &driver->oled.surface.dirty, driver->framebuffer);
break;
case QP_ROTATION_270:
qp_oled_panel_page_column_flush_rot270(device, &driver->oled.surface.dirty, driver->framebuffer);
break;
}
// Clear the dirty area
qp_flush(&driver->oled.surface);
return true;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver vtable
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
const oled_panel_painter_driver_vtable_t sh1106_driver_vtable = {
.base =
{
.init = qp_sh1106_init,
.power = qp_oled_panel_power,
.clear = qp_oled_panel_clear,
.flush = qp_sh1106_flush,
.pixdata = qp_oled_panel_passthru_pixdata,
.viewport = qp_oled_panel_passthru_viewport,
.palette_convert = qp_oled_panel_passthru_palette_convert,
.append_pixels = qp_oled_panel_passthru_append_pixels,
.append_pixdata = qp_oled_panel_passthru_append_pixdata,
},
.opcodes =
{
.display_on = SH1106_DISPLAY_ON,
.display_off = SH1106_DISPLAY_OFF,
.set_page = SH1106_PAGE_ADDR,
.set_column_lsb = SH1106_SETCOLUMN_LSB,
.set_column_msb = SH1106_SETCOLUMN_MSB,
},
};
#ifdef QUANTUM_PAINTER_SH1106_SPI_ENABLE
// Factory function for creating a handle to the SH1106 device
painter_device_t qp_sh1106_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
for (uint32_t i = 0; i < SH1106_NUM_DEVICES; ++i) {
sh1106_device_t *driver = &sh1106_drivers[i];
if (!driver->oled.base.driver_vtable) {
painter_device_t surface = qp_make_mono1bpp_surface_advanced(&driver->oled.surface, 1, panel_width, panel_height, driver->framebuffer);
if (!surface) {
return NULL;
}
// Setup the OLED device
driver->oled.base.driver_vtable = (const painter_driver_vtable_t *)&sh1106_driver_vtable;
driver->oled.base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
driver->oled.base.native_bits_per_pixel = 1; // 1bpp mono
driver->oled.base.panel_width = panel_width;
driver->oled.base.panel_height = panel_height;
driver->oled.base.rotation = QP_ROTATION_0;
driver->oled.base.offset_x = 0;
driver->oled.base.offset_y = 0;
// SPI and other pin configuration
driver->oled.base.comms_config = &driver->oled.spi_dc_reset_config;
driver->oled.spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->oled.spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->oled.spi_dc_reset_config.spi_config.lsb_first = false;
driver->oled.spi_dc_reset_config.spi_config.mode = spi_mode;
driver->oled.spi_dc_reset_config.dc_pin = dc_pin;
driver->oled.spi_dc_reset_config.reset_pin = reset_pin;
driver->oled.spi_dc_reset_config.command_params_uses_command_pin = true;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(sh1106_device_t));
return NULL;
}
return (painter_device_t)driver;
}
}
return NULL;
}
#endif // QUANTUM_PAINTER_SH1106_SPI_ENABLE
#ifdef QUANTUM_PAINTER_SH1106_I2C_ENABLE
// Factory function for creating a handle to the SH1106 device
painter_device_t qp_sh1106_make_i2c_device(uint16_t panel_width, uint16_t panel_height, uint8_t i2c_address) {
for (uint32_t i = 0; i < SH1106_NUM_DEVICES; ++i) {
sh1106_device_t *driver = &sh1106_drivers[i];
if (!driver->oled.base.driver_vtable) {
// Instantiate the surface, intentional swap of width/high due to transpose
painter_device_t surface = qp_make_mono1bpp_surface_advanced(&driver->oled.surface, 1, panel_width, panel_height, driver->framebuffer);
if (!surface) {
return NULL;
}
// Setup the OLED device
driver->oled.base.driver_vtable = (const painter_driver_vtable_t *)&sh1106_driver_vtable;
driver->oled.base.comms_vtable = (const painter_comms_vtable_t *)&i2c_comms_cmddata_vtable;
driver->oled.base.native_bits_per_pixel = 1; // 1bpp mono
driver->oled.base.panel_width = panel_width;
driver->oled.base.panel_height = panel_height;
driver->oled.base.rotation = QP_ROTATION_0;
driver->oled.base.offset_x = 0;
driver->oled.base.offset_y = 0;
// I2C configuration
driver->oled.base.comms_config = &driver->oled.i2c_config;
driver->oled.i2c_config.chip_address = i2c_address;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(sh1106_device_t));
return NULL;
}
return (painter_device_t)driver;
}
}
return NULL;
}
#endif // QUANTUM_PAINTER_SH1106_SPI_ENABLE

66
drivers/painter/sh1106/qp_sh1106.h Normal file
View file

@ -0,0 +1,66 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"
#include "qp_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter SH1106 configurables (add to your keyboard's config.h)
#if defined(QUANTUM_PAINTER_SH1106_SPI_ENABLE) && !defined(SH1106_NUM_SPI_DEVICES)
/**
* @def This controls the maximum number of SPI SH1106 devices that Quantum Painter can communicate with at any one time.
* Increasing this number allows for multiple displays to be used.
*/
# define SH1106_NUM_SPI_DEVICES 1
#else
# define SH1106_NUM_SPI_DEVICES 0
#endif
#if defined(QUANTUM_PAINTER_SH1106_I2C_ENABLE) && !defined(SH1106_NUM_I2C_DEVICES)
/**
* @def This controls the maximum number of I2C SH1106 devices that Quantum Painter can communicate with at any one time.
* Increasing this number allows for multiple displays to be used.
*/
# define SH1106_NUM_I2C_DEVICES 1
#else
# define SH1106_NUM_I2C_DEVICES 0
#endif
#define SH1106_NUM_DEVICES ((SH1106_NUM_SPI_DEVICES) + (SH1106_NUM_I2C_DEVICES))
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter SH1106 device factories
#ifdef QUANTUM_PAINTER_SH1106_SPI_ENABLE
/**
* Factory method for an SH1106 SPI LCD device.
*
* @param panel_width[in] the width of the display in pixels (usually 128)
* @param panel_height[in] the height of the display in pixels (usually 64)
* @param chip_select_pin[in] the GPIO pin used for SPI chip select
* @param dc_pin[in] the GPIO pin used for D/C control
* @param reset_pin[in] the GPIO pin used for RST
* @param spi_divisor[in] the SPI divisor to use when communicating with the display
* @param spi_mode[in] the SPI mode to use when communicating with the display
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_sh1106_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
#endif // QUANTUM_PAINTER_SH1106_SPI_ENABLE
#ifdef QUANTUM_PAINTER_SH1106_I2C_ENABLE
/**
* Factory method for an SH1106 I2C LCD device.
*
* @param panel_width[in] the width of the display in pixels (usually 128)
* @param panel_height[in] the height of the display in pixels (usually 64)
* @param i2c_address[in] the I2C address to use
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_sh1106_make_i2c_device(uint16_t panel_width, uint16_t panel_height, uint8_t i2c_address);
#endif // QUANTUM_PAINTER_SH1106_I2C_ENABLE

26
drivers/painter/sh1106/qp_sh1106_opcodes.h Normal file
View file

@ -0,0 +1,26 @@
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define SH1106_DISPLAY_ON 0xAF
#define SH1106_DISPLAY_OFF 0xAE
#define SH1106_SET_OSC_DIVFREQ 0xD5
#define SH1106_SET_MUX_RATIO 0xA8
#define SH1106_DISPLAY_OFFSET 0xD3
#define SH1106_DISPLAY_START_LINE 0x40
#define SH1106_SET_CHARGE_PUMP 0x8D
#define SH1106_SET_SEGMENT_REMAP_NORMAL 0xA0
#define SH1106_SET_SEGMENT_REMAP_INV 0xA1
#define SH1106_COM_SCAN_DIR_INC 0xC0
#define SH1106_COM_SCAN_DIR_DEC 0xC8
#define SH1106_COM_PADS_HW_CFG 0xDA
#define SH1106_SET_CONTRAST 0x81
#define SH1106_SET_PRECHARGE_PERIOD 0xD9
#define SH1106_VCOM_DETECT 0xDB
#define SH1106_ALL_ON_RESUME 0xA4
#define SH1106_NON_INVERTING_DISPLAY 0xA6
#define SH1106_DEACTIVATE_SCROLL 0x2E
#define SH1106_SETCOLUMN_LSB 0x00
#define SH1106_SETCOLUMN_MSB 0x10
#define SH1106_PAGE_ADDR 0xB0

15
drivers/painter/ssd1351/qp_ssd1351.c
View file

@ -107,13 +107,14 @@ painter_device_t qp_ssd1351_make_spi_device(uint16_t panel_width, uint16_t panel
driver->base.native_bits_per_pixel = 16; // RGB565
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

1
drivers/painter/ssd1351/qp_ssd1351.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"

1
drivers/painter/ssd1351/qp_ssd1351_opcodes.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

15
drivers/painter/st77xx/qp_st7735.c
View file

@ -127,13 +127,14 @@ painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_
driver->base.native_bits_per_pixel = 16; // RGB565
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

3
drivers/painter/st77xx/qp_st7735.h
View file

@ -2,7 +2,6 @@
// Copyright 2021 Nick Brassel (@tzarc)
// Copyright 2022 David Hoelscher (@customMK)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"
@ -42,4 +41,4 @@
* @return the device handle used with all drawing routines in Quantum Painter
*/
painter_device_t qp_st7735_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
#endif // QUANTUM_PAINTER_ST7735_SPI_ENABLE
#endif // QUANTUM_PAINTER_ST7735_SPI_ENABLE

1
drivers/painter/st77xx/qp_st7735_opcodes.h
View file

@ -1,6 +1,5 @@
// Copyright 2022 David Hoelscher (@customMK)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

15
drivers/painter/st77xx/qp_st7789.c
View file

@ -126,13 +126,14 @@ painter_device_t qp_st7789_make_spi_device(uint16_t panel_width, uint16_t panel_
driver->base.native_bits_per_pixel = 16; // RGB565
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));

1
drivers/painter/st77xx/qp_st7789.h
View file

@ -1,7 +1,6 @@
// Copyright 2021 Paul Cotter (@gr1mr3aver)
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "gpio.h"

1
drivers/painter/st77xx/qp_st7789_opcodes.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Paul Cotter (@gr1mr3aver)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

1
drivers/painter/st77xx/qp_st77xx_opcodes.h
View file

@ -1,6 +1,5 @@
// Copyright 2021 Paul Cotter (@gr1mr3aver)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

1
drivers/painter/tft_panel/qp_tft_panel.h
View file

@ -1,5 +1,6 @@
// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "color.h"
#include "qp_internal.h"