drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

[Keyboard] PloopyCo update and fixes (#10936)

Browse source 
This is based on feedback talking with crop_octagon about the device.  Future trackballs will ship with ATMEL DFU for simplicity.  This also includes some fixes and optimizations based on code review and tinkering on my own devices.
This commit is contained in:
Drashna Jael're 2020-11-18 14:20:29 -08:00 • committed by GitHub
parent 3aef2bef8f
commit 88a783a8a7
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
10 changed files with 46 additions and 70 deletions
Download patch file Download diff file Expand all files Collapse all files

23
keyboards/ploopyco/trackball/readme.md
View file

@ -58,26 +58,3 @@ To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIO
The `PLOOPY_DPI_OPTIONS` array sets the values that you want to be able to cycle through, and the order they are in. The "default" define lets the firmware know which of these options is the default and should be loaded by default.
The `DPI_CONFIG` macro will cycle through the values in the array, each time you hit it. And it stores this value in persistent memory, so it will load it the next time the device powers up.
# Programming QMK-DFU onto the PloopyCo Trackball
If you would rather have DFU on this board, you can use the QMK-DFU bootloader on the device. To do so, you want to run:
make ploopyco/trackball:default:production
Once you have that, you'll need to [ISP Flash](https://docs.qmk.fm/#/isp_flashing_guide) the chip with the new bootloader hex file created (or the production hex), and set the fuses:
| Fuse | Setting |
|----------|------------------|
| Low | `0xDF` |
| High | `0xD8` or `0x98` |
| Extended | `0xCB` |
Original (Caterina) settings:
| Fuse | Setting |
|----------|------------------|
| Low | `0xFF` |
| High | `0xD8` |
| Extended | `0xFE` |