drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

RGB Matrix support for Massdrop CTRL/ALT (#5328)

Browse source 
* port Massdrop CTRL/ALT to use RGB Matrix

Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>

* Massdrop lighting support working

This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.

* Updating config based on testing results with patrickmt & compile errors

* Updates for PR5328

For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.

* remove prilik keymap form PR
This commit is contained in:
Daniel Prilik 2019-04-03 18:30:47 -07:00 • committed by Drashna Jaelre
parent 63177760de
commit 763b26cdb9
38 changed files with 1688 additions and 1070 deletions
Download patch file Download diff file Expand all files Collapse all files

25
keyboards/massdrop/ctrl/config_led.h
View file

@ -15,11 +15,11 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _config_led_h_
#define _config_led_h_
#pragma once
//Define number of ISSI3733 drivers being used (1...16)
#define ISSI3733_DRIVER_COUNT 2
#define DRIVER_LED_TOTAL ISSI3733_LED_COUNT
//Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic)
#define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE }
@ -30,22 +30,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//Count of LED bodies
#define ISSI3733_LED_COUNT 119
//Default Global Current Register value (Default brightness 0 - 255)
#define ISSI3733_GCR_DEFAULT 128
#define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus
#define LED_GCR_STEP 10 //GCR increment/decrement value
#ifdef USE_MASSDROP_CONFIGURATOR
#define ANIMATION_SPEED_STEP 1
#define BREATHE_STEP 1
#define BREATHE_MIN_STEP 0
#define BREATHE_MAX_STEP 255
#endif
//Default Global Current Register value (Default brightness 0 - 255)
#define ISSI3733_GCR_DEFAULT LED_GCR_MAX
//Automatic power rollback and recovery
#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power )
#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit)
#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down)
#define ANIMATION_SPEED_STEP 1
#define BREATHE_MIN_STEP 0
#define BREATHE_MAX_STEP 255
//LED Mapping - More practically generated from a spreadsheet program
//id: ID of the LED (Sync with PCB callouts)
//x: Physical X coordinate of LED (units do not matter)
@ -187,5 +190,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define USB_LED_COMPOSE_SCANCODE 255
#define USB_LED_KANA_SCANCODE 255
#endif //USB_LED_INDICATOR_ENABLE
#endif //_config_led_h_