1
0
Fork 0

Refactor: move macro3 into handwired folder (#22759)

This commit is contained in:
フィルターペーパー 2023-12-27 12:26:48 +08:00 committed by GitHub
parent da6a05bfea
commit 489151d7a0
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 4 additions and 4 deletions

View file

@ -0,0 +1,51 @@
{
"keyboard_name": "Macro3",
"manufacturer": "DPB",
"url": "https://github.com/davidphilipbarr/Macropads/tree/main/macro3",
"maintainer": "@davidphilipbarr",
"usb": {
"vid": "0xC88B",
"pid": "0x3388",
"device_version": "0.0.3"
},
"encoder": {
"rotary": [
{"pin_a": "D2", "pin_b": "D3"},
{"pin_a": "F7", "pin_b": "F6"}
]
},
"development_board": "promicro",
"features": {
"bootmagic": true,
"extrakey": true,
"mousekey": true,
"encoder": true
},
"bootmagic": {
"matrix": [0, 3]
},
"matrix_pins": {
"direct": [
["D7", "C6", "D4", "D1"],
["B1", "B4", "B5", "B3"]
]
},
"layout_aliases": {
"LAYOUT": "LAYOUT_ortho_2x4"
},
"layouts": {
"LAYOUT_ortho_2x4": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]},
{"x": 1, "y": 0, "matrix": [0, 1]},
{"x": 2, "y": 0, "matrix": [0, 2]},
{"x": 3, "y": 0, "matrix": [0, 3]},
{"x": 0, "y": 1, "matrix": [1, 0]},
{"x": 1, "y": 1, "matrix": [1, 1]},
{"x": 2, "y": 1, "matrix": [1, 2]},
{"x": 3, "y": 1, "matrix": [1, 3]}
]
}
}
}

View file

@ -0,0 +1,25 @@
/* Copyright 2020 David Philip Barr <@davidphilipbarr>
* Copyright 2021 @filterpaper
* SPDX-License-Identifier: GPL-2.0+
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_2x4(
KC_MUTE, KC_MPLY, KC_MRWD, LT(1,KC_MFFD),
C(KC_Z), C(KC_X), C(KC_C), C(KC_V)
),
[1] = LAYOUT_ortho_2x4(
_______, _______, _______, _______,
QK_BOOT, _______, _______, _______
)
};
#ifdef ENCODER_MAP_ENABLE
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
[0] = { ENCODER_CCW_CW(KC_VOLU, KC_VOLD), ENCODER_CCW_CW(KC_MNXT, KC_MPRV) },
[1] = { ENCODER_CCW_CW(KC_VOLU, KC_VOLD), ENCODER_CCW_CW(KC_PGDN, KC_PGUP) },
};
#endif

View file

@ -0,0 +1 @@
ENCODER_MAP_ENABLE = yes

View file

@ -0,0 +1,27 @@
/* Copyright 2020 David Philip Barr <@davidphilipbarr>
* Copyright 2021 @filterpaper
* SPDX-License-Identifier: GPL-2.0+
*/
#include "quantum.h"
#ifdef ENCODER_ENABLE
bool encoder_update_kb(uint8_t index, bool clockwise) {
if (!encoder_update_user(index, clockwise)) { return false; }
if (index == 0) {
if (clockwise) {
tap_code_delay(KC_VOLU, 10);
} else {
tap_code_delay(KC_VOLD, 10);
}
} else if (index == 1) {
if (clockwise) {
tap_code(KC_MNXT);
} else {
tap_code(KC_MPRV);
}
}
return true;
}
#endif

View file

@ -0,0 +1,26 @@
# Macro3
![Macro3](https://github.com/filterpaper/filterpaper.github.io/raw/main/images/macro3.png)
Macro3 is a low-profile macro pad with dual encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr).
## Keyboard Info
* Keyboard Maintainer: [filterpaper](https://github.com/filterpaper)
* Hardware Supported: Macro3
* Hardware Availability: [Open-source](https://github.com/davidphilipbarr/Macropads/tree/main/macro3)
Make example for this keyboard (after setting up your build environment):
make handwired/macro3:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top right key and plug in the controller.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.
* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.

View file

@ -0,0 +1 @@
# This file intentionally left blank