drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

Adding default settings for ERM motors for Hadron v3 haptic feedback (#4761)

Browse source 
* adding default settings to support 3v ERM vibration motors

* set default settings of haptic motor for LV061228B-L64-A 2v LRA

* update ishtob keymap and fix config settings
This commit is contained in:
ishtob 2019-01-02 16:30:59 -05:00 • committed by MechMerlin
parent a7b1b146d1
commit 484c85bd0d
3 changed files with 22 additions and 12 deletions
Download patch file Download diff file Expand all files Collapse all files

30
keyboards/hadron/ver3/config.h
View file

@ -148,13 +148,26 @@
#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* default 3V ERM vibration motor voltage and library*/
#if FB_ERM_LRA == 0
#define RATED_VOLTAGE 3
#define V_RMS 2.3
#define V_PEAK 3.30
/* Library Selection */
#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
/* default 2V LRA voltage and library */
#elif FB_ERM_LRA == 1
#define RATED_VOLTAGE 2
#define V_RMS 2.0
#define V_PEAK 2.85
#define F_LRA 205
#define F_LRA 200
/* Library Selection */
#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
#endif
/* Control 1 register settings */
#define DRIVE_TIME 25
#define AC_COUPLE 0
@ -179,14 +192,11 @@
#define ZC_DET_TIME 0
#define AUTO_CAL_TIME 3
//#define WS2812_LED_N 2
//#define RGBLED_NUM WS2812_LED_N
//#define WS2812_TIM_N 2
//#define WS2812_TIM_CH 2
//#define PORT_WS2812 GPIOA
//#define PIN_WS2812 15
//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP
//#define RGBLIGHT_ANIMATIONS
//#define RGBLED_NUM 10
//#define RGB_DI_PIN B5
//#define DRIVER_LED_TOTAL RGBLED_NUM
//#define RGB_MATRIX_KEYPRESSES
#endif