Fix location of where the make command should be run
This commit is contained in:
parent
e0caf94323
commit
479139f9d4
4 changed files with 8 additions and 6 deletions
|
@ -6,6 +6,8 @@ The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It ha
|
|||
|
||||
## Build Guide
|
||||
|
||||
A build log of the Nyquist can be found here: [Nyquist Build Log](http://imgur.com/a/dD4sX).
|
||||
|
||||
Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
|
||||
|
||||
There is additional information there about flashing and adding RGB underglow.
|
||||
|
@ -98,7 +100,7 @@ unnecessary in simple use cases.
|
|||
|
||||
Flashing
|
||||
-------
|
||||
From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
|
||||
From the `nyquist` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
|
||||
Example: `make rev1-serial-avrdude`
|
||||
|
||||
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue