1
0
Fork 0

[Keyboard] move @GlenPickle 's chimera* boards into a folder (#16072)

This commit is contained in:
peepeetee 2022-02-01 03:47:38 +08:00 committed by GitHub
parent 6cb0e8924b
commit 3fefaf7f6b
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
34 changed files with 4 additions and 4 deletions

View file

@ -0,0 +1,16 @@
#include "chimera_ergo.h"
void led_init(void) {
DDRD |= (1<<1);
PORTD |= (1<<1);
DDRF |= (1<<4) | (1<<5);
PORTF |= (1<<4) | (1<<5);
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init();
}

View file

@ -0,0 +1,62 @@
#pragma once
#include "quantum.h"
#define red_led_off PORTF |= (1<<5)
#define red_led_on PORTF &= ~(1<<5)
#define blu_led_off PORTF |= (1<<4)
#define blu_led_on PORTF &= ~(1<<4)
#define grn_led_off PORTD |= (1<<1)
#define grn_led_on PORTD &= ~(1<<1)
#define set_led_off red_led_off; grn_led_off; blu_led_off
#define set_led_red red_led_on; grn_led_off; blu_led_off
#define set_led_blue red_led_off; grn_led_off; blu_led_on
#define set_led_green red_led_off; grn_led_on; blu_led_off
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
#define set_led_white red_led_on; grn_led_on; blu_led_on
/*
#define LED_B 5
#define LED_R 6
#define LED_G 7
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define red_led_on PORTF |= (1<<LED_R)
#define red_led_off PORTF &= ~(1<<LED_R)
#define grn_led_on PORTF |= (1<<LED_G)
#define grn_led_off PORTF &= ~(1<<LED_G)
#define blu_led_on PORTF |= (1<<LED_B)
#define blu_led_off PORTF &= ~(1<<LED_B)
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
*/
#define XXX KC_NO
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define LAYOUT( \
k10, k05, k22, k42, k33, k34, k37, k38, k48, k29, k49, k1B, \
k20, k31, k12, k03, k14, k24, k27, k17, k08, k19, k3A, k2B, \
k30, k21, k02, k13, k04, k40, k46, k07, k18, k09, k2A, k3B, \
k15, k44, k32, k23, k43, k41, k06, k47, k28, k39, k4A, k16, \
k35, k25, k26, k36 \
) { \
{ XXX, XXX, k02, k03, k04, k05, k06, k07, k08, k09, XXX, XXX }, \
{ k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1B }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B }, \
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B }, \
{ k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4A, XXX } \
}

View file

@ -0,0 +1,58 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER unknown
#define PRODUCT Chimera Ergo
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 12
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
#define ONESHOT_TIMEOUT 500
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

View file

@ -0,0 +1,10 @@
{
"keyboard_name": "Chimera Ergo",
"url": "",
"maintainer": "qmk",
"layouts": {
"LAYOUT": {
"layout": [{"label":"k00", "x":0, "y":1}, {"label":"k01", "x":1, "y":0.75}, {"label":"k02", "x":2, "y":0.25}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0.25}, {"label":"k05", "x":5, "y":0.5}, {"label":"k06", "x":7, "y":0.5}, {"label":"k07", "x":8, "y":0.25}, {"label":"k08", "x":9, "y":0}, {"label":"k09", "x":10, "y":0.25}, {"label":"k10", "x":11, "y":0.75}, {"label":"k11", "x":12, "y":1}, {"label":"k12", "x":0, "y":2}, {"label":"k13", "x":1, "y":1.75}, {"label":"k14", "x":2, "y":1.25}, {"label":"k15", "x":3, "y":1}, {"label":"k16", "x":4, "y":1.25}, {"label":"k17", "x":5, "y":1.5}, {"label":"k18", "x":7, "y":1.5}, {"label":"k19", "x":8, "y":1.25}, {"label":"k20", "x":9, "y":1}, {"label":"k21", "x":10, "y":1.25}, {"label":"k22", "x":11, "y":1.75}, {"label":"k23", "x":12, "y":2}, {"label":"k24", "x":0, "y":3}, {"label":"k25", "x":1, "y":2.75}, {"label":"k26", "x":2, "y":2.25}, {"label":"k27", "x":3, "y":2}, {"label":"k28", "x":4, "y":2.25}, {"label":"k29", "x":5, "y":2.5}, {"label":"k30", "x":7, "y":2.5}, {"label":"k31", "x":8, "y":2.25}, {"label":"k32", "x":9, "y":2}, {"label":"k33", "x":10, "y":2.25}, {"label":"k34", "x":11, "y":2.75}, {"label":"k35", "x":12, "y":3}, {"label":"k36", "x":0, "y":4}, {"label":"k37", "x":1, "y":3.75}, {"label":"k38", "x":2, "y":3.25}, {"label":"k39", "x":3, "y":3}, {"label":"k40", "x":4, "y":3.25}, {"label":"k41", "x":5, "y":3.5}, {"label":"k42", "x":7, "y":3.5}, {"label":"k43", "x":8, "y":3.25}, {"label":"k44", "x":9, "y":3}, {"label":"k45", "x":10, "y":3.25}, {"label":"k46", "x":11, "y":3.75}, {"label":"k47", "x":12, "y":4}, {"label":"k48", "x":4, "y":4.75}, {"label":"k49", "x":5, "y":5}, {"label":"k50", "x":7, "y":5}, {"label":"k51", "x":8, "y":4.75}]
}
}
}

View file

@ -0,0 +1,159 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include QMK_KEYBOARD_H
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum chimera_ergo_layers
{
_QWERTY,
_CAPS,
_NUMPAD,
_SYMBOLS,
_MACROS,
_NAV
};
enum custom_keycodes {
SC_INCL = SAFE_RANGE,
SC_PULL,
SC_PUSH,
SC_SCAP,
SC_SCOF
};
#define SC_NMPD TG(_NUMPAD)
#define SC_SYMB TG(_SYMBOLS)
#define SC_SPFN LT(_NAV,KC_EQL)
#define SC_SCTL MT(MOD_LCTL, KC_LBRC)
#define SC_SCTR MT(MOD_LCTL, KC_RBRC)
#define SC_SPLT MT(MOD_LALT, KC_MINS)
#define SC_SPRT MT(MOD_LALT, KC_1)
#define SC_GBRC MT(MOD_RGUI, KC_RBRC)
#define SC_MESC LT(_MACROS, KC_ESC)
#define SC_CAD LALT(LCTL(KC_DEL))
#define LONGPRESS_DELAY 150
//#define LAYER_TOGGLE_DELAY 300
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
KC_LBRC, KC_1, SC_SCTL, SC_SPLT, SC_SPFN, KC_5, KC_6, SC_GBRC, SC_SPRT, SC_SCTR, KC_0, KC_RBRC,
SC_MESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_QUOT,
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
SC_NMPD, KC_BSPC, KC_SPC, SC_SYMB
),
[_CAPS] = LAYOUT(
_______, KC_UNDS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______,
SC_SCOF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, SC_SCOF,
_______, _______, _______, _______
),
[_NUMPAD] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, _______,
_______, _______, KC_COLN, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_ASTR, _______,
_______, _______, KC_DOT , _______, _______, _______, _______, KC_4, KC_5, KC_6, KC_PLUS, _______,
_______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_SLSH, _______,
_______, _______, _______, KC_0
),
[_SYMBOLS] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSLS,
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TILD, KC_EQL, KC_UNDS, KC_LCBR, KC_RCBR, _______,
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_GRV, KC_PLUS, KC_MINS, KC_LBRC, KC_RBRC, _______,
KC_PIPE, _______, _______, _______
),
[_MACROS] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, SC_INCL, _______, _______, _______,
_______, _______, _______, SC_CAD, _______, _______, _______, _______, _______, _______, _______, _______,
SC_SCAP, _______, _______, _______, _______, _______, _______, _______, SC_PULL, SC_PUSH, _______, _______,
_______, _______, _______, _______
),
[_NAV] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, _______,
_______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, KC_DEL, _______, _______
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch(keycode) {
/* include some kind of library or header */
case SC_INCL:
if (record->event.pressed) {
SEND_STRING("#include <>");
tap_code(KC_LEFT);
}
return false;
case SC_PULL:
if (record->event.pressed) {
SEND_STRING("git pull");
tap_code(KC_ENT);
}
return false;
case SC_PUSH:
if (record->event.pressed) {
SEND_STRING("git push");
tap_code(KC_ENT);
}
return false;
case SC_SCAP:
if (record->event.pressed) {
layer_on(_CAPS);
tap_code(KC_CAPS);
}
return false;
case SC_SCOF:
if (record->event.pressed) {
layer_off(_CAPS);
tap_code(KC_CAPS);
}
return false;
default:
return true;
}
return true;
};
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _QWERTY:
set_led_green;
break;
case _CAPS:
set_led_white;
break;
case _NUMPAD:
set_led_blue;
break;
case _SYMBOLS:
set_led_red;
break;
case _NAV:
set_led_magenta;
break;
case _MACROS:
set_led_cyan;
break;
default:
set_led_green;
break;
}
};

View file

@ -0,0 +1,65 @@
/*
Copyright 2012 Jun Wako
Copyright 2014 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quantum.h"
#include "matrix.h"
#include "uart.h"
void matrix_init_custom(void) {
uart_init(1000000);
}
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
bool changed = false;
//the s character requests the RF slave to send the matrix
uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[14] = {0};
//there are 10 bytes corresponding to 10 columns, and an end byte
for (uint8_t i = 0; i < 14; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
while (!uart_available()) {
timeout++;
if (timeout > 10000) {
break;
}
}
uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6;
if (current_matrix[i] != current_row) {
changed = true;
}
current_matrix[i] = current_row;
}
}
return changed;
}

View file

@ -0,0 +1,16 @@
# Chimera Ergo
![Chimera Ergo](https://imgur.com/AA6ycMQ.jpg)
A split wireless 40% ergonomic keyboard
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
Make example for this keyboard (after setting up your build environment):
make glenpickle/chimera_ergo:default
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

View file

@ -0,0 +1,23 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
# project specific files
SRC += matrix.c
QUANTUM_LIB_SRC += uart.c