1
0
Fork 0

KC60 Refactor (#8782)

This commit is contained in:
James Young 2020-04-15 13:31:09 -07:00 committed by GitHub
parent daf6dedb02
commit 3cc68543ca
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
12 changed files with 410 additions and 387 deletions

View file

@ -15,18 +15,17 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define VENDOR_ID 0x530A
#define PRODUCT_ID 0x6FFC
#define DEVICE_VER 0x0001
#define MANUFACTURER You
#define PRODUCT kc60v2
#define DESCRIPTION A custom keyboard
#define MANUFACTURER NPKC
#define PRODUCT KC60
#define DESCRIPTION QMK Firmware: KC60
/* key matrix size */
#define MATRIX_ROWS 5
@ -41,119 +40,60 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0
// Pins for rows include: D0 D1 F6 F7 D5
// KC60 Version 2
*/
#define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 }
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
#define BACKLIGHT_PIN B6
/* COL2ROW or ROW2COL */
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN B6
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
#ifdef RGBLIGHT_ENABLE
# define RGB_DI_PIN F5
# define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
# define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
// # define RGBLIGHT_EFFECT_BREATHING
// # define RGBLIGHT_EFFECT_RAINBOW_MOOD
// # define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// # define RGBLIGHT_EFFECT_SNAKE
// # define RGBLIGHT_EFFECT_KNIGHT
// # define RGBLIGHT_EFFECT_CHRISTMAS
// # define RGBLIGHT_EFFECT_STATIC_GRADIENT
// # define RGBLIGHT_EFFECT_RGB_TEST
// # define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
// # define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// # define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif