1
0
Fork 0

Remove arm_atsam platform (#24337)

This commit is contained in:
Joel Challis 2024-09-02 03:48:17 +01:00 committed by GitHub
parent 096aca63c5
commit 3bd303f204
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
215 changed files with 3 additions and 73516 deletions

View file

@ -75,10 +75,6 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
For a detailed overview about the RP2040 support by QMK see the [dedicated RP2040 page](platformdev_rp2040).
## Atmel ATSAM
There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop). However, it is not recommended to design a board with this microcontroller as the support is quite specialized to Massdrop hardware.
## RISC-V
### GigaDevice

View file

@ -13,7 +13,7 @@ The following macros provide basic control of GPIOs and are found in `platforms/
|`gpio_set_pin_input_low(pin)` |Set pin as input with builtin pull-down resistor (unavailable on AVR)|
|`gpio_set_pin_output(pin)` |Set pin as output (alias of `gpio_set_pin_output_push_pull`) |
|`gpio_set_pin_output_push_pull(pin)` |Set pin as output, push/pull mode |
|`gpio_set_pin_output_open_drain(pin)`|Set pin as output, open-drain mode (unavailable on AVR and ATSAM) |
|`gpio_set_pin_output_open_drain(pin)`|Set pin as output, open-drain mode (unavailable on AVR) |
|`gpio_write_pin_high(pin)` |Set pin level as high, assuming it is an output |
|`gpio_write_pin_low(pin)` |Set pin level as low, assuming it is an output |
|`gpio_write_pin(pin, level)` |Set pin level, assuming it is an output |