[Keyboard] Code updates for macro3 (#15280)
Co-authored-by: filterpaper <filterpaper@localhost>
This commit is contained in:
parent
690a879d77
commit
35a18a8bcd
6 changed files with 34 additions and 69 deletions
|
@ -1,8 +1,8 @@
|
|||
# Macro3
|
||||
|
||||

|
||||

|
||||
|
||||
Macro3 is a low-profile macro pad with encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr) using direct micro-controller pin wiring.
|
||||
Macro3 is a low-profile macro pad with dual encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr).
|
||||
|
||||
## Keyboard Info
|
||||
|
||||
|
@ -21,6 +21,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
|
|||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the top right key and plug in the controller.
|
||||
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
|
||||
* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
|
||||
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue