drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

splitkb/kyria: remove CONVERT_TO at keyboard level (#23857)

Browse source
This commit is contained in:
Ryan 2024-06-11 13:25:51 +10:00 • committed by GitHub
parent e381f91c6e
commit 354a2e40cf
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
15 changed files with 149 additions and 114 deletions
Download patch file Download diff file Expand all files Collapse all files

17
keyboards/splitkb/kyria/rev2/proton_c/config.h Normal file
View file

@ -0,0 +1,17 @@
// Copyright 2024 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
#define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_TX_PIN A9
#define SERIAL_USART_RX_PIN A10
#define WS2812_PWM_CHANNEL 4
#define WS2812_PWM_PAL_MODE 1
#define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_PWM_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_PWM_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.