drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

splitkb/kyria: remove CONVERT_TO at keyboard level (#23857)

Browse source
This commit is contained in:
Ryan 2024-06-11 13:25:51 +10:00 • committed by GitHub
parent e381f91c6e
commit 354a2e40cf
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
15 changed files with 149 additions and 114 deletions
Download patch file Download diff file Expand all files Collapse all files

31
keyboards/splitkb/kyria/rev2/config.h
View file

@ -19,34 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Side detection
// col 4 row 3 on right-hand-side
#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row
#define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c`
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#if defined(CONVERT_TO_PROTON_C)
# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
# define SERIAL_USART_TX_PIN D3
# define SERIAL_USART_RX_PIN D2
# define WS2812_DI_PIN PAL_LINE(GPIOA, 3)
# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
# define WS2812_PWM_CHANNEL 4 // default: 2
# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
# define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_PWM_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_PWM_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
#else
# define WS2812_DI_PIN D3
# define SOFT_SERIAL_PIN D2
#endif
#ifdef OLED_ENABLE
# define OLED_DISPLAY_128X64
# define SPLIT_OLED_ENABLE
#endif
#define OLED_DISPLAY_128X64
#define SPLIT_OLED_ENABLE