Fix breathing always on for soft PWM (#5983)
* Fix breathing always on for soft PWM * Remove reference to hardware PWM pins in BACKLIGHT_BREATHING description Now, breathing will only be unsupported when Timers 1 and 3 are both used by Audio * Document BACKLIGHT_ON_STATE and its purpose
This commit is contained in:
parent
67e0c951af
commit
317b809564
3 changed files with 19 additions and 10 deletions
|
@ -80,7 +80,7 @@ This is a C header file that is one of the first things included, and will persi
|
|||
* `#define BACKLIGHT_LEVELS 3`
|
||||
* number of levels your backlight will have (maximum 15 excluding off)
|
||||
* `#define BACKLIGHT_BREATHING`
|
||||
* enables backlight breathing (only works with backlight pins B5, B6 and B7)
|
||||
* enables backlight breathing
|
||||
* `#define BREATHING_PERIOD 6`
|
||||
* the length of one backlight "breath" in seconds
|
||||
* `#define DEBOUNCE 5`
|
||||
|
|
|
@ -64,11 +64,17 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
|
|||
|Define |Default |Description |
|
||||
|---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
|
||||
|`BACKLIGHT_PIN` |`B7` |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
|
||||
|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information|
|
||||
|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information |
|
||||
|`BACKLIGHT_LEVELS` |`3` |The number of brightness levels (maximum 15 excluding off) |
|
||||
|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) |
|
||||
|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported |
|
||||
|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported |
|
||||
|`BREATHING_PERIOD` |`6` |The length of one backlight "breath" in seconds |
|
||||
|`BACKLIGHT_ON_STATE` |`0` |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low |
|
||||
|
||||
## Backlight On State
|
||||
|
||||
Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *low*.
|
||||
Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case you must `#define BACKLIGHT_ON_STATE 1`, so that when the transistor is on, the pin is driven *high* instead.
|
||||
|
||||
## Multiple backlight pins
|
||||
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue