drashna/qmk_firmware
1
0
Fork 0
Code Activity Actions

Align RGBKB keyboards to current standards (#23663)

Browse source
This commit is contained in:
Joel Challis 2024-05-11 13:11:50 +01:00 • committed by GitHub
parent 73f3f6e56d
commit 2d4832f57a
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
49 changed files with 238 additions and 625 deletions
Download patch file Download diff file Expand all files Collapse all files

62
keyboards/rgbkb/sol3/rev1/config.h Normal file
View file

@ -0,0 +1,62 @@
/*
* ----------------------------------------------------------------------------
* "THE BEER-WARE LICENSE" (Revision 42):
* <https://github.com/Legonut> wrote this file. As long as you retain this
* notice you can do whatever you want with this stuff. If we meet some day, and
* you think this stuff is worth it, you can buy me a beer in return. David Rauseo
* ----------------------------------------------------------------------------
*/
#pragma once
#define BUSY_WAIT
#define BUSY_WAIT_INSTRUCTIONS 35 // Increase if two rows are pressed at the same time.
#define GPIO_INPUT_PIN_DELAY 10
/* Touchbar adjustments */
#define TOUCH_DEADZONE 50 // width of a "button", wider inputs will be interpreted as a swipe
#define TOUCH_TERM 350 // time of a "button" touch, longer inputs will be a swipe
#define TOUCH_RESOLUTION 25 // sensitivity of swipes, lower=faster
#define TOUCH_SEGMENTS 3
/* CRC Configuration */
#define CRC8_OPTIMIZE_SPEED
#define CRC8_USE_TABLE
/* Split Keyboard Configuration */
#define SPLIT_HAND_PIN C13
#define SPLIT_USB_DETECT
#define SERIAL_USART_TX_PAL_MODE 7
#define SERIAL_USART_TIMEOUT 5
#define SERIAL_USART_DRIVER SD1
//#define SERIAL_USART_FULL_DUPLEX - Waiting on reunification pr
#if SERIAL_USART_FULL_DUPLEX
#define SERIAL_USART_RX_PIN A10
#define SERIAL_USART_RX_PAL_MODE 7
// Mun connects TX to TX and RX to RX as we were planning on i2c split, so we need pin swap for full duplex
#define SERIAL_USART_PIN_SWAP
#define SERIAL_USART_SPEED (2 * 1024 * 1024)
#else
#define SERIAL_USART_SPEED (1 * 1024 * 1024)
#endif
/* Split Transport Features */
#define SPLIT_TRANSACTION_IDS_KB TOUCH_ENCODER_SYNC, RGB_MENU_SYNC
#define WS2812_PWM_DRIVER PWMD3
#define WS2812_PWM_CHANNEL 2
#define WS2812_PWM_PAL_MODE 2
#define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM3
#define WS2812_PWM_DMA_CHANNEL 3
#define TOUCH_UPDATE_INTERVAL 33
#define OLED_UPDATE_INTERVAL 33
#define OLED_FONT_H "keyboards/rgbkb/common/glcdfont.c"
/* Audio Configuration */
#define AUDIO_PIN A4
#define AUDIO_PIN_ALT A5
#define AUDIO_PIN_ALT_AS_NEGATIVE
#define AUDIO_CLICKY
#define AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE
#define AUDIO_DAC_OFF_VALUE 0