Added support for Wb32fq95 (#16871)

platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h

@@ -34,7 +34,10 @@
 /*
  * Board identifier.
  */
-#define WB32F3G71x9
+#if !(defined(WB32F3G71x9) || defined(WB32F3G71xB) || defined(WB32F3G71xC))
+  #define WB32F3G71x9
+#endif
+
 #if !defined(WB32F3G71xx)
   #define WB32F3G71xx
 #endif

platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c

@@ -0,0 +1,82 @@
+/*
+    Copyright (C) 2022 Westberry Technology (ChangZhou) Corp., Ltd
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types.                                         */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+static void wb32_gpio_init(void) {
+
+#if WB32_HAS_GPIOA
+  rccEnableAPB1(RCC_APB1ENR_GPIOAEN);
+#endif
+
+#if WB32_HAS_GPIOB
+  rccEnableAPB1(RCC_APB1ENR_GPIOBEN);
+#endif
+
+#if WB32_HAS_GPIOC
+  rccEnableAPB1(RCC_APB1ENR_GPIOCEN);
+#endif
+
+#if WB32_HAS_GPIOD
+  rccEnableAPB1(RCC_APB1ENR_GPIODEN);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  wb32_clock_init();
+  wb32_gpio_init();
+}
+/**
+ * @brief   Board-specific initialization code.
+ * @note    You can add your board-specific code here.
+ */
+void boardInit(void) {
+
+}

platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.h

@@ -0,0 +1,59 @@
+#pragma once
+/*
+    Copyright (C) 2022 Westberry Technology (ChangZhou) Corp., Ltd
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*===========================================================================*/
+/* Driver constants.                                                         */
+/*===========================================================================*/
+
+/*
+ * Setup board.
+ */
+
+/*
+ * Board identifier.
+ */
+#if !(defined(WB32FQ95x9) || defined(WB32FQ95xB) || defined(WB32FQ95xC))
+  #define WB32FQ95xB
+#endif
+
+#if !defined(WB32FQ95xx)
+  #define WB32FQ95xx
+#endif
+
+/*===========================================================================*/
+/* External declarations.                                                    */
+/*===========================================================================*/
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.mk

@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/board/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/board
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC  += $(BOARDINC)

platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/chconf.h

@@ -0,0 +1,26 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h -r platforms/chibios/boards/common/configs/chconf.h`
+ */
+
+#pragma once
+
+#define CH_CFG_ST_TIMEDELTA 0
+
+#include_next <chconf.h>

platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/config.h

@@ -0,0 +1,20 @@
+/*  Copyright (C) 2022 Westberry Technology (ChangZhou) Corp., Ltd
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+#    define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif

platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/mcuconf.h

@@ -0,0 +1,168 @@
+/*
+    Copyright (C) 2022 Westberry Technology (ChangZhou) Corp., Ltd
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+#define WB32FQ95xx_MCUCONF  TRUE
+
+/*
+ * WB32FQ95 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ */
+
+/**
+ * @name    Internal clock sources
+ * @{
+ */
+#define WB32_HSECLK                        12000000
+#define WB32_LSECLK                        32768
+
+/*
+ * HAL driver system settings.
+ */
+#define WB32_NO_INIT                       FALSE
+#define WB32_MHSI_ENABLED                  TRUE
+#define WB32_FHSI_ENABLED                  FALSE
+#define WB32_LSI_ENABLED                   FALSE
+#define WB32_HSE_ENABLED                   TRUE
+#define WB32_LSE_ENABLED                   FALSE
+#define WB32_PLL_ENABLED                   TRUE
+#define WB32_MAINCLKSRC                    WB32_MAINCLKSRC_PLL
+#define WB32_PLLSRC                        WB32_PLLSRC_HSE
+#define WB32_PLLDIV_VALUE                  2
+#define WB32_PLLMUL_VALUE                  12     //The allowed range is 12,16,20,24.
+#define WB32_HPRE                          1
+#define WB32_PPRE1                         1
+#define WB32_PPRE2                         1
+#define WB32_USBPRE                        WB32_USBPRE_DIV1P5
+
+/*
+ * EXTI driver system settings.
+ */
+#define WB32_IRQ_EXTI0_PRIORITY            6
+#define WB32_IRQ_EXTI1_PRIORITY            6
+#define WB32_IRQ_EXTI2_PRIORITY            6
+#define WB32_IRQ_EXTI3_PRIORITY            6
+#define WB32_IRQ_EXTI4_PRIORITY            6
+#define WB32_IRQ_EXTI5_9_PRIORITY          6
+#define WB32_IRQ_EXTI10_15_PRIORITY        6
+#define WB32_IRQ_EXTI16_PRIORITY           6
+#define WB32_IRQ_EXTI17_PRIORITY           6
+#define WB32_IRQ_EXTI18_PRIORITY           6
+#define WB32_IRQ_EXTI19_PRIORITY           6
+
+/*
+ * GPT driver system settings.
+ */
+#define WB32_TIM_MAX_CHANNELS              4
+#define WB32_GPT_USE_TIM1                  FALSE
+#define WB32_GPT_USE_TIM2                  FALSE
+#define WB32_GPT_USE_TIM3                  FALSE
+#define WB32_GPT_USE_TIM4                  FALSE
+#define WB32_GPT_TIM1_IRQ_PRIORITY         7
+#define WB32_GPT_TIM2_IRQ_PRIORITY         7
+#define WB32_GPT_TIM3_IRQ_PRIORITY         7
+#define WB32_GPT_TIM4_IRQ_PRIORITY         7
+
+/*
+ * ICU driver system settings.
+ */
+#define WB32_ICU_USE_TIM1                  FALSE
+#define WB32_ICU_USE_TIM2                  FALSE
+#define WB32_ICU_USE_TIM3                  FALSE
+#define WB32_ICU_USE_TIM4                  FALSE
+#define WB32_ICU_TIM1_IRQ_PRIORITY         7
+#define WB32_ICU_TIM2_IRQ_PRIORITY         7
+#define WB32_ICU_TIM3_IRQ_PRIORITY         7
+#define WB32_ICU_TIM4_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define WB32_PWM_USE_ADVANCED              FALSE
+#define WB32_PWM_USE_TIM1                  FALSE
+#define WB32_PWM_USE_TIM2                  FALSE
+#define WB32_PWM_USE_TIM3                  FALSE
+#define WB32_PWM_USE_TIM4                  FALSE
+#define WB32_PWM_TIM1_IRQ_PRIORITY         7
+#define WB32_PWM_TIM2_IRQ_PRIORITY         7
+#define WB32_PWM_TIM3_IRQ_PRIORITY         7
+#define WB32_PWM_TIM4_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define WB32_I2C_USE_I2C1                  FALSE
+#define WB32_I2C_USE_I2C2                  FALSE
+#define WB32_I2C_BUSY_TIMEOUT              50
+#define WB32_I2C_I2C1_IRQ_PRIORITY         5
+#define WB32_I2C_I2C2_IRQ_PRIORITY         5
+
+/*
+ * SERIAL driver system settings.
+ */
+#define WB32_SERIAL_USE_UART1             FALSE
+#define WB32_SERIAL_USE_UART2             FALSE
+#define WB32_SERIAL_USE_UART3             FALSE
+#define WB32_SERIAL_USART1_PRIORITY        12
+#define WB32_SERIAL_USART2_PRIORITY        12
+#define WB32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define WB32_SPI_USE_QSPI                   FALSE
+#define WB32_SPI_USE_SPIM2                  FALSE
+#define WB32_SPI_USE_SPIS1                  FALSE
+#define WB32_SPI_USE_SPIS2                  FALSE
+#define WB32_SPI_QSPI_IRQ_PRIORITY          10
+#define WB32_SPI_SPIM2_IRQ_PRIORITY         10
+#define WB32_SPI_SPIS1_IRQ_PRIORITY         10
+#define WB32_SPI_SPIS2_IRQ_PRIORITY         10
+
+/*
+ * ST driver system settings.
+ */
+#define WB32_ST_IRQ_PRIORITY                8
+#define WB32_ST_USE_TIMER                   2
+
+/*
+ * UART driver system settings.
+ */
+#define WB32_UART_USE_UART1                 FALSE
+#define WB32_UART_USE_UART2                 FALSE
+#define WB32_UART_USE_UART3                 FALSE
+#define WB32_UART_UART1_IRQ_PRIORITY        12
+#define WB32_UART_UART2_IRQ_PRIORITY        12
+#define WB32_UART_UART3_IRQ_PRIORITY        12
+
+/*
+ * USB driver system settings.
+ */
+#define WB32_USB_USE_USB1                   TRUE
+#define WB32_USB_USB1_IRQ_PRIORITY          13
+#define WB32_USB_HOST_WAKEUP_DURATION       10
+
+
+#endif /* MCUCONF_H */

platforms/chibios/chibios_config.h

@@ -55,7 +55,7 @@
 #if defined(MCU_WB32)
 #    define CPU_CLOCK WB32_MAINCLK
 
-#    if defined(WB32F3G71xx)
+#    if defined(WB32F3G71xx) || defined(WB32FQ95xx)
 #        define PAL_OUTPUT_TYPE_OPENDRAIN PAL_WB32_OTYPE_OPENDRAIN
 #        define PAL_OUTPUT_TYPE_PUSHPULL PAL_WB32_OTYPE_PUSHPULL
 #        define PAL_OUTPUT_SPEED_HIGHEST PAL_WB32_OSPEED_HIGH

platforms/chibios/drivers/i2c_master.c

@@ -97,7 +97,7 @@ static const I2CConfig i2cconfig = {
     I2C1_OPMODE,
     I2C1_CLOCK_SPEED,
     I2C1_DUTY_CYCLE,
-#elif defined(WB32F3G71xx)
+#elif defined(WB32F3G71xx) || defined(WB32FQ95xx)
     I2C1_OPMODE,
     I2C1_CLOCK_SPEED,
 #else

platforms/chibios/drivers/spi_master.c

@@ -54,7 +54,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
         return false;
     }
 
-#ifndef WB32F3G71xx
+#if !(defined(WB32F3G71xx) || defined(WB32FQ95xx))
     uint16_t roundedDivisor = 2;
     while (roundedDivisor < divisor) {
         roundedDivisor <<= 1;
@@ -138,7 +138,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
 
     spiConfig.cpr = (roundedDivisor - 1) >> 1;
 
-#elif defined(WB32F3G71xx)
+#elif defined(WB32F3G71xx) || defined(WB32FQ95xx)
     if (!lsbFirst) {
         osalDbgAssert(lsbFirst != FALSE, "unsupported lsbFirst");
     }

platforms/chibios/drivers/uart.c

@@ -18,7 +18,7 @@
 
 #include "quantum.h"
 
-#if defined(WB32F3G71xx)
+#if defined(WB32F3G71xx) || defined(WB32FQ95xx)
 static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_WRDLEN, SD1_STPBIT, SD1_PARITY, SD1_ATFLCT};
 #else
 static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3};