ARM split - Add support for dfu-util EE_HANDS flashing (#6543)
* Initial stab at some fake dfu-util-split-left behaviour * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> * Clang format fixes * Fake eeprom init for both left and right hand
This commit is contained in:
parent
92cb0b6f2f
commit
17794e0b25
6 changed files with 44 additions and 4 deletions
|
@ -232,4 +232,6 @@ Flashing sequence:
|
|||
There are a number of DFU commands that you can use to flash firmware to a STM32 device:
|
||||
|
||||
* `:dfu-util` - The default command for flashing to STM32 devices.
|
||||
* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util.
|
||||
* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
|
||||
* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
|
||||
* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util.
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue