[Keyboard] Jian keyboard (#8914)

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>

keyboards/jian/rev1/config.h

@@ -0,0 +1,138 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC0DE
+#define PRODUCT_ID      0x1337
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    KgOfHedgehogs
+#define PRODUCT         Jian
+#define DESCRIPTION     An ergo split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+#define DIODE_DIRECTION COL2ROW
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D3, D2, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+
+/* Use I2C or Serial, not both */
+// #define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+// different Jian configs
+#define DIPS_ENABLE
+#define PHYSICAL_LEDS_ENABLE
+#define NUM_LOCK_LED_PIN C6
+#define CAPS_LOCK_LED_PIN D7
+#define SCROLL_LOCK_LED_PIN B5
+
+// #define NUM_NMOSFET  //uncomment this if you using n-mosfet
+// #define CAPS_NMOSFET  //uncomment this if you using n-mosfet
+// #define SCROLL_NMOSFET  //uncomment this if you using n-mosfet
+
+// #define NUM_INVERT // uncomment this if you want to reverse logic of numlock
+// This will make it light up only when lock is off
+// (Doesn't work on mac. There is no num lock, so it will be always off and lit)
+
+#ifdef NUM_NMOSFET
+#define RESET_NUM_LOCK_LED() writePinLow(NUM_LOCK_LED_PIN)
+#ifdef NUM_INVERT
+#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, !led_state.num_lock)
+#else
+#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, led_state.num_lock)
+#endif // NUM_INVERT
+#else
+#define RESET_NUM_LOCK_LED() writePinHigh(NUM_LOCK_LED_PIN)
+#ifdef NUM_INVERT
+#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, led_state.num_lock)
+#else
+#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, !led_state.num_lock)
+#endif // NUM_INVERT
+#endif // NUM_NMOSFET
+
+#ifdef CAPS_NMOSFET
+#define RESET_CAPS_LOCK_LED() writePinLow(CAPS_LOCK_LED_PIN)
+#define UPDATE_CAPS_LOCK_LED() writePin(CAPS_LOCK_LED_PIN, led_state.caps_lock)
+#else
+#define RESET_CAPS_LOCK_LED() writePinHigh(CAPS_LOCK_LED_PIN)
+#define UPDATE_CAPS_LOCK_LED() writePin(CAPS_LOCK_LED_PIN, !led_state.caps_lock)
+#endif // CAPS_NMOSFET
+
+#ifdef SCROLL_NMOSFET
+#define RESET_SCROLL_LOCK_LED() writePinLow(SCROLL_LOCK_LED_PIN)
+#define UPDATE_SCROLL_LOCK_LED() writePin(SCROLL_LOCK_LED_PIN, led_state.scroll_lock)
+#else
+#define RESET_SCROLL_LOCK_LED() writePinHigh(SCROLL_LOCK_LED_PIN)
+#define UPDATE_SCROLL_LOCK_LED() writePin(SCROLL_LOCK_LED_PIN, !led_state.scroll_lock)
+#endif // SCROLL_NMOSFET
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+#ifdef BACKLIGHT_ENABLE
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 5
+//#define BACKLIGHT_BREATHING //not working with splits right now
+#define BREATHING_PERIOD 6
+#endif
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 7    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS //not working with splits right now
+
+#define RGBLIGHT_SLEEP
+#define RGBLIGHT_SPLIT
+
+#ifndef IOS_DEVICE_ENABLE
+#if RGBLED_NUM <= 6
+#define RGBLIGHT_LIMIT_VAL 255
+#else
+#define RGBLIGHT_LIMIT_VAL 130
+#endif
+#define RGBLIGHT_VAL_STEP 8
+#else
+#if RGBLED_NUM <= 6
+#define RGBLIGHT_LIMIT_VAL 90
+#else
+#define RGBLIGHT_LIMIT_VAL 45
+#endif
+#define RGBLIGHT_VAL_STEP 4
+#endif
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
+#define USB_MAX_POWER_CONSUMPTION 400
+#else
+// iOS device need lessthan 100
+#define USB_MAX_POWER_CONSUMPTION 100
+#endif