1
0
Fork 0

[Keyboard] Add Kyria rev. 2 (#16178)

This commit is contained in:
L. K. Post 2022-02-21 07:33:00 +01:00 committed by GitHub
parent 9bf25d1cd5
commit 14fb3cc8b0
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
17 changed files with 508 additions and 113 deletions

View file

@ -0,0 +1,107 @@
/*
Copyright 2022 Thomas Baart <thomas@splitkb.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0x8D1D
#define PRODUCT_ID 0x9D9D
#define DEVICE_VER 0x0002
#define MANUFACTURER splitkb
#define PRODUCT Kyria rev2
/* key matrix size */
/* Rows are doubled up */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
// wiring
#define MATRIX_ROW_PINS \
{ F6, F7, B1, B3 }
#define MATRIX_COL_PINS \
{ B2, B6, B5, B4, E6, D7, C6, D4 }
#define MATRIX_ROW_PINS_RIGHT \
{ D4, C6, D7, E6 }
#define MATRIX_COL_PINS_RIGHT \
{ B4, B5, B6, B2, B3, B1, F7, F6 }
#define UNUSED_PINS
#define ENCODERS_PAD_A \
{ F4 }
#define ENCODERS_PAD_B \
{ F5 }
#define ENCODERS_PAD_A_RIGHT \
{ F5 }
#define ENCODERS_PAD_B_RIGHT \
{ F4 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
// Side detection
// col 4 row 3 on right-hand-side
#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row
#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
#define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c`
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#if defined(CONVERT_TO_PROTON_C)
# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
# define SERIAL_USART_TX_PIN D3
# define SERIAL_USART_RX_PIN D2
# define RGB_DI_PIN PAL_LINE(GPIOA, 3)
# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
# define WS2812_PWM_CHANNEL 4 // default: 2
# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
#else
# define RGB_DI_PIN D3
# define SOFT_SERIAL_PIN D2
#endif
#define RGBLED_SPLIT \
{ 10, 10 }
#define RGBLED_NUM 20
#ifdef OLED_ENABLE
# define OLED_DISPLAY_128X64
# define SPLIT_OLED_ENABLE
#endif
/* RGB matrix support */
#ifdef RGB_MATRIX_ENABLE
# define SPLIT_TRANSPORT_MIRROR
# define DRIVER_LED_TOTAL RGBLED_NUM // Number of LEDs
# define RGB_MATRIX_SPLIT { 10, 10 }
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
# define RGB_DISABLE_WHEN_USB_SUSPENDED
#endif

View file

@ -0,0 +1,22 @@
/* Copyright 2020 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define CH_CFG_ST_RESOLUTION 16
#define CH_CFG_ST_FREQUENCY 10000
#include_next "chconf.h"

View file

@ -0,0 +1,22 @@
/* Copyright 2020 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_I2C TRUE
#define HAL_USE_PWM TRUE
#define HAL_USE_SERIAL TRUE
#include_next <halconf.h>

View file

@ -0,0 +1,29 @@
/* Copyright 2020 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#pragma once
#include_next <mcuconf.h>
#undef STM32_PWM_USE_TIM2
#define STM32_PWM_USE_TIM2 TRUE
#undef STM32_PWM_USE_TIM3
#define STM32_PWM_USE_TIM3 FALSE
#undef STM32_SERIAL_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE
#undef STM32_ST_USE_TIMER
#define STM32_ST_USE_TIMER 3

View file

@ -0,0 +1,17 @@
/* Copyright 2022 Thomas Baart <thomas@splitkb.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "proton_c.h"

View file

@ -0,0 +1,19 @@
/* Copyright 2022 Thomas Baart <thomas@splitkb.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "rev2.h"

View file

@ -0,0 +1,12 @@
# MCU name
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
WS2812_DRIVER = pwm
SERIAL_DRIVER = usart
AUDIO_ENABLE = no
LTO_ENABLE = no
CONVERT_TO_PROTON_C = yes

View file

@ -0,0 +1,76 @@
/* Copyright 2022 Thomas Baart <thomas@splitkb.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "rev2.h"
// Mask out handedness diode to prevent it
// from keeping the keyboard awake
// - just mirroring `KC_NO` in the `LAYOUT`
// macro to keep it simple
const matrix_row_t matrix_mask[] = {
0b11111100,
0b11111100,
0b11111111,
0b00101111,
0b11111100,
0b11111100,
0b11111111,
0b00101111,
};
#ifdef SWAP_HANDS_ENABLE
// clang-format off
__attribute__ ((weak)) const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}, {6, 4}, {7, 4}},
{{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}, {6, 5}, {7, 5}},
{{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}, {6, 6}, {7, 6}},
{{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}, {6, 7}, {7, 7}},
{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}, {6, 0}, {7, 0}},
{{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}, {6, 1}, {7, 1}},
{{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}, {6, 2}, {7, 2}},
{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}, {6, 3}, {7, 3}}
};
// clang-format on
#endif
#ifdef RGB_MATRIX_ENABLE
/* Map physical under glow LEDs for RGB matrix support
* 09, 02, xx, xx, 01, xx, xx, 11, xx, xx, 12, 19,
* xx, xx, xx, xx, xx, 00, 10, xx, xx, xx, xx, xx,
* 08, 03, 04, xx, xx, xx, 07, xx, xx, 17, xx, xx, xx, 14, 13, 18,
* xx, 05, 06, xx, xx, xx, xx, 16, 15, xx
*/
led_config_t g_led_config = { {
// Key Matrix to LED Index
{ NO_LED, NO_LED, NO_LED, 1, NO_LED, NO_LED, 2, 9 },
{ NO_LED, NO_LED, 0, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
{ NO_LED, 7, NO_LED, NO_LED, NO_LED, 4, 3, 8 },
{ NO_LED, NO_LED, 6, 5, NO_LED, NO_LED, NO_LED, NO_LED },
{ NO_LED, NO_LED, NO_LED, 11, NO_LED, NO_LED, 12, 19 },
{ NO_LED, NO_LED, 10, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
{ NO_LED, 17, NO_LED, NO_LED, NO_LED, 14, 13, 18 },
{ NO_LED, NO_LED, 16, 15, NO_LED, NO_LED, NO_LED, NO_LED },
}, {
// LED Index to Physical Position
{77,24}, {63,8}, {21,8}, {21,40}, {35,40}, {63,56}, {77,56}, {91,40}, {7,40}, {7,8},
{147,24}, {161,8}, {203,8}, {203,40}, {189,40}, {161,56}, {147,56}, {133,40}, {217,40}, {217,8}
}, {
// LED Index to Flag
LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL,
LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL,
LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL,
LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL
} };
#endif

View file

@ -0,0 +1,70 @@
/* Copyright 2022 Thomas Baart <thomas@splitkb.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "kyria.h"
#ifdef KEYBOARD_splitkb_kyria_rev2_proton_c
# include "proton_c.h"
#endif
/* This a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R06, R07, R08, R09, R10, R11, \
L12, L13, L14, L15, L16, L17, R18, R19, R20, R21, R22, R23, \
L24, L25, L26, L27, L28, L29, L30, L31, R32, R33, R34, R35, R36, R37, R38, R39, \
L40, L41, L42, L43, L44, R45, R46, R47, R48, R49 \
) \
{ \
{ KC_NO, KC_NO, L05, L04, L03, L02, L01, L00 }, \
{ KC_NO, KC_NO, L17, L16, L15, L14, L13, L12 }, \
{ L31, L30, L29, L28, L27, L26, L25, L24 }, \
{ L44, L43, L42, L41, KC_NO, L40, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, R06, R07, R08, R09, R10, R11 }, \
{ KC_NO, KC_NO, R18, R19, R20, R21, R22, R23 }, \
{ R32, R33, R34, R35, R36, R37, R38, R39 }, \
{ R45, R46, R47, R48, KC_NO, R49, KC_NO, KC_NO }, \
}
#define LAYOUT_stack( \
L00, L01, L02, L03, L04, L05, \
L12, L13, L14, L15, L16, L17, \
L24, L25, L26, L27, L28, L29, L30, L31, \
L40, L41, L42, L43, L44, \
\
R06, R07, R08, R09, R10, R11, \
R18, R19, R20, R21, R22, R23, \
R32, R33, R34, R35, R36, R37, R38, R39, \
R45, R46, R47, R48, R49 \
) \
{ \
{ KC_NO, KC_NO, L05, L04, L03, L02, L01, L00 }, \
{ KC_NO, KC_NO, L17, L16, L15, L14, L13, L12 }, \
{ L31, L30, L29, L28, L27, L26, L25, L24 }, \
{ L44, L43, L42, L41, KC_NO, L40, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, R06, R07, R08, R09, R10, R11 }, \
{ KC_NO, KC_NO, R18, R19, R20, R21, R22, R23 }, \
{ R32, R33, R34, R35, R36, R37, R38, R39 }, \
{ R45, R46, R47, R48, KC_NO, R49, KC_NO, KC_NO }, \
}
#define LAYOUT_split_3x6_5 LAYOUT

View file

@ -0,0 +1,8 @@
OLED_ENABLE = yes
OLED_DRIVER = SSD1306 # Enables the use of OLED displays
ENCODER_ENABLE = yes # Enables the use of one or more encoders
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
RGB_MATRIX_ENABLE = no # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)
RGB_MATRIX_DRIVER = WS2812 # RGB matrix driver support
RGB_MATRIX_SUPPORTED = yes