Fixup iron165r2 (#17119)

* initial

* revert some defines

* formatting

* apply changes

* update readme

* suggestion

keyboards/smithrune/iron165r2/f072/rules.mk

@@ -1,4 +1,24 @@
 # MCU name
 MCU = STM32F072
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # USB Nkey Rollover
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = no
+ENCODER_ENABLE = no
 BACKLIGHT_ENABLE = yes
 BACKLIGHT_DRIVER = pwm
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/smithrune/iron165r2/f411/rules.mk

@@ -1,5 +1,26 @@
+# MCU name
 MCU = STM32F411
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # USB Nkey Rollover
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = no
+ENCODER_ENABLE = no
 EEPROM_DRIVER = i2c
 BACKLIGHT_ENABLE = yes
 BACKLIGHT_DRIVER = pwm
 WS2812_DRIVER = pwm
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/smithrune/iron165r2/readme.md

@@ -26,13 +26,13 @@ The 165R2 PCB was prototyped and tested using two microcontrollers: STM32F072 an
 
 After checking what PCB you own and setting up your build environment, you can compile the Iron 165R2 default keymap by using one of the options below.
 
-    make smithrune/iron165r2/165r2_f072:default
-    make smithrune/iron165r2/165r2_f411:default
+    make smithrune/iron165r2/f072:default
+    make smithrune/iron165r2/f411:default
 
 And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
 
-    make smithrune/iron165r2/165r2_f072:default:flash
-    make smithrune/iron165r2/165r2_f411:default:flash
+    make smithrune/iron165r2/f072:default:flash
+    make smithrune/iron165r2/f411:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 

keyboards/smithrune/iron165r2/rules.mk

@@ -1,18 +0,0 @@
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # USB Nkey Rollover
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = no
-ENCODER_ENABLE = no
-# Enter lower-power sleep mode when on the ChibiOS idle thread
-OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRU